1 / 10

830, 831 4”- 6”

830, 831 4”- 6”. Modification Overview. Production of the 830/831 series began in 2000 for 4”-6” sizes only Production was discontinued in 2006. The 831 DCDA uses a ¾” 850B bypass. Single Access Cover Removal. Cover is o-ring sealed. Cover has no spring load. Check Valve Removal.

Download Presentation

830, 831 4”- 6”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 830, 831 4”- 6”

  2. Modification Overview • Production of the 830/831 series began in 2000 for 4”-6” sizes only • Production was discontinued in 2006. • The 831 DCDA uses a ¾” 850B bypass.

  3. Single Access Cover Removal • Cover is o-ring sealed. • Cover has no spring load.

  4. Check Valve Removal • Check valve modules. • Modules sealed by o-ring and secured by a retainer. • Slide retainer and flow insert straight out of body.

  5. Check Valve Removal • Remove the first check by sliding the module down stream. • Remove the second check by using a screwdriver flat to free the module from the body.

  6. Disassemble Check Valve • Hold the module firmly with the disc retainer cone facing up. • Using a large flat head screwdriver, unscrew the retainer counter clockwise.

  7. Disassemble Check Valve • Turn the module over. • Module is spring loaded – Hold firmly. • Use an 1/8” allen wrench to remove the socket head cap screws.

  8. Check Seat Inspection • The check seat is free once the module is disassembled.

  9. Check Disc Replacement • The disc holder and disc are free once the module is disassembled.

  10. Check Valve Reassembly Notes • Reassemble in reverse order. • Apply lubricant to seat o-ring.

More Related