1 / 5

Msi interrupt reception as EP

Msi interrupt reception as EP. Based on sprugs6a.pdf, Keystone architecture Perpheral Component Interconnect Express (PCIe) wrote 8 into MSI_IRQ (0x218000) MSI_EN is set in pcie_msi_cap (0x21801000+0x50) MSI0_IRQ_STATUS (0x21800104) is updated with 3 matching 8 in MSI_IRQ

cecilia-gould
Download Presentation

Msi interrupt reception as EP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Msi interrupt reception as EP

  2. Based on sprugs6a.pdf, Keystone architecture Perpheral Component Interconnect Express (PCIe) wrote 8 into MSI_IRQ (0x218000) MSI_EN is set in pcie_msi_cap (0x21801000+0x50) MSI0_IRQ_STATUS (0x21800104) is updated with 3 matching 8 in MSI_IRQ So the forced interrupt is detected by PCIe_MSI Msi debug

  3. Configured the following in cfg, match the c-code in wiki var hwi0Params = new Hwi.Params(); hwi0Params.instance.name = "pcie_msi_core0"; hwi0Params.eventId = 17; hwi0Params.priority = 3; Program.global.pcie_msi_core0 = Hwi.create(5, "&pcie_msi_isr", hwi0Params); Based on table 7-33 in TMS320c6657, event number 17 is PCIE_MSI_INTn (for core 0, it would be PCIE_MSI_INT0) In func pcie_msi_isr, there is counter and break point is not hit after writing into the MSI_IRQ register We plan to dedicate interrupt 5 for PCIe interrupt. We therefore do not have to use EventCombiner, right? It is expected all the enabling and matching is setup In func pcie_msi_isr, there is counter and break point is not hit after writing into the MSI_IRQ register Do we miss anything here? HWI set up

  4. In CCS 5, under view/registers/control registers IE05 in IER is enabled, but IF5 in IFR is still 0 Interrupt debugIER/IFR

  5. In ccs5, under registers, we have INTC0, INTC1 and INTC2 Does this mean that MSI_INTn is one of the 106 primary event to core 0 without going through INTC0? How do I match the interrupt with CIC0? Is there a specific enabling bit and status bit for event 17? If it is, where can I see it? INTC registers

More Related