120 likes | 456 Views
Since 2001, CertBlaster has helped millions of IT professionals in acquiring their desired certifications. Above is a demo questionaire for CompTIA A practice tests. For Subscribing to our plans, visit http://www.certblaster.com/comptia/a/
E N D
CompTIA Demo Questions CompTIA A+ Practice Test Questions Visit: http://www.certblaster.com/comptia/a/
CompTIA Demo Questions 1. Which of the following IP addresses would a technician see if a computer is connected to a multifunction network device and is attempting to obtain an IP address automatically but is not receiving an IP address from the DHCP server? A. 172.16.10.10 B. 192.168.0.10 C. 169.254.10.10 D. 192.168.10.10
CompTIA Demo Questions 2. 80mm and 120mm are common sizes for what type of PC component? A. Case fans B. CPUs C. Heat sinks D. Memory modules
CompTIA Demo Questions 3. What is the total number of devices that can be daisy-chained to an IEEE 1394 port? A. 127 B. 63 C. 15 D. 255
CompTIA Demo Questions 4. What does a yellow exclamation point next to a device in the Device Manager indicate? A. A driver is not properly installed for this device. B. The device is disabled. C. The driver is not digitally signed. D. The device driver needs to be upgraded
CompTIA Demo Questions 5. Beep codes are generated by which of the following? A. CMOS B. RTC C. POST D. Windows
CompTIA Demo Questions 6. How should you apply spray cleaner to a monitor? A. Spray the cleaner directly on the monitor screen. B. Spray the cleaner on the top of the monitor and wipe down. C. Spray evenly on the monitor. D. Spray the cleaner on a clean, lint-free cloth first.
CompTIA Demo Questions 7. Which bus slot provides the highest video performance? A. PCI B. SCSI C. AGP D. PCIe
CompTIA Demo Questions 8. Which of the following indicates that a printer is network-ready? A. An RJ11 jack B. A USB connector C. An RJ45 jack D. An SCSI connector
CompTIA Demo Questions 9. You just turned off a printer to maintenance it. What should you be careful of when removing the fuser? A. The fuser being hot B. The fuser being wet C. The fuser being fragile D. The fuser releasing toner
CompTIA Demo Questions 10. Where is the memory controller located in a Core 2 Duo system? A. On the CPU B. On memory C. Within the chipset D. Within the PCIe controller
CompTIA Demo Questions Thank You !!! For More Questions Visit: http://www.certblaster.com/comptia/a/