1 / 6

Elevate Your Networking Skills with D-PCM-DY-23 Dell Technologies PowerSwitch Campus Deploy 2023 Certification

Unlock the potential of your networking career with D-PCM-DY-23, the Dell Technologies PowerSwitch Campus Deploy 2023 certification. Gain expertise in deploying and managing cutting-edge network infrastructure. This comprehensive certification equips you with the knowledge and skills needed to excel in network deployment, configuration, and optimization. Stand out in the competitive IT landscape with this prestigious certification. Prepare to tackle real-world challenges and advance your career with confidence.<br>https://www.certsgrade.com/pdf/d-pcm-dy-23/

certsgrade
Download Presentation

Elevate Your Networking Skills with D-PCM-DY-23 Dell Technologies PowerSwitch Campus Deploy 2023 Certification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dell EMC D-PCM-DY-23 Dell Technologies PowerSwitch Campus Deploy 2023 Questions And Answers PDF Format: For More Information – Visit link below: https://www.certsgrade.com/ Version = Version = Product Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/

  2. Latest Version: 6.0 Question: 1 Which command should a network administrator use to configure a group of interfaces on a Dell EMC N4000 Series switch? Response: A.interface tengigabitethernet 1/0/1-8 B.interface range tengigabitethernet 1/0/1, 1/0/8 C.interface range tengigabitethernet 1/0/1-8 D.interface range gigabitethernet 1/0/1-8 Answer: C Question: 2 What is the maximum power that a Class 4 PoE device can consume? Response: A.30 watts B.60 watts C.25.5 watts D.15.4 watts Answer: C Question: 3 What is the effect of the default pre-empt setting on a Dell PowerSwitch N-Series switch when VRRP is enabled? Response: A.Prevents the Primary router from failing and the Backup router remains as backup forever. B.Forces the system to change the Primary router if another router with a higher priority joins the VRRP group. C.Forces the system to change the Primary router if another router with a lower priority joins the VRRP group. D.Prevents the Backup router with the higher priority from becoming the Primary router. Answer: B Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/

  3. Question: 4 In a traditional three-tier hierarchical campus network, what are connected at the Access layer? Response: A.Application servers B.Wireless access points C.Data storage devices D.Firewalls Answer: B Question: 5 Which command will show the policy-based routing map applied on an interface? Response: A.show ip access-lists B.show route-map C.show ip policy D.show ip interface Answer: C Question: 6 An administrator is attempting to configure MLAG on two pairs of stacked switches; however, the MLAG cannot be created. What is the most likely reason for this issue? Response: A.Stacked switches cannot perform MLAG functions B.Stacked switches are in a Daisy Chain topology C.Firmware on the MLAG stacks are at different versions D.Spanning tree is not enabled on the MLAG stacks Answer: A Question: 7 Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/

  4. A port has been configured with port-security dynamic with one allowable MAC address. What happens if no frames from that MAC address are seen by the switch within the MAC table age-out time? Response: A.Switch will allow the next MAC address it sees to have access on that port B.No MAC addresses will be allowed access on that port C.Only the original MAC address will ever be allowed on that port D.All MAC addresses will be allowed access on that port Answer: A Question: 8 How many bits are in each section of an IPv6 address? Response: A.16 B.32 C.24 D.8 Answer: A Question: 9 To which destination MAC address are MLAG peer-keepalive packets sent? Response: A.01:00:B5:00:00:00 B.01:00:C5:00:00:00 C.B5:00:01:00:00:00 D.C5:00:01:00:00:00 Answer: A Question: 10 What is needed to allow an SSH connection to a Dell EMC N-Series switch? Response: A.Enable authentication, authorization, and accounting B.Create a default-gateway address and a static route Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/

  5. C.Disable telnet and enable SSH D.Enable SSH and create a local user account with a password Answer: D Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/

  6. For More Information – Visit link below: https://www.certsgrade.com/ PRODUCT FEATURES 100% Money Back Guarantee 90 Days Free updates Special Discounts on Bulk Orders Guaranteed Success 50,000 Satisfied Customers 100% Secure Shopping Privacy Policy Refund Policy 16 USD Discount Coupon Code: NB4XKTMZ Visit us athttps://www.certsgrade.com/pdf/d-pcm-dy-23/ Powered by TCPDF (www.tcpdf.org)

More Related