1 / 28

Chapter 12 - Solutions

Chapter 12 - Solutions. A) Sapling HW 12 Due by 11:50 pm Monday, 11/4/2013 B) End-of-Chapter Problems. C) Final exam on Wednesday, December 11 from 8-10 am. Final exam includes all the chapters & lectures – including my lab reviews. D) Quiz #2: Chapters 11&12 on Monday, November 4, 2013

chandler
Download Presentation

Chapter 12 - Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 12 - Solutions A) Sapling HW 12 Due by 11:50 pm Monday, 11/4/2013 B) End-of-Chapter Problems. C) Final exam on Wednesday, December 11 from 8-10 am. Final exam includes all the chapters & lectures – including my lab reviews. D) Quiz #2: Chapters 11&12 on Monday, November 4, 2013 Exam #2: Chapters 11&12 on Wednesday, November 6, 2013

  2. End-of-Chapter ProblemsPages 526 - 532 3 - 9 11 15 16 17 19 20 21 22 23 24 28 32 35 40 - 43 47 49 51 56 59 69 73 75 77 79 81 99

  3. I. Solutions A. Types Definitions: Solution – Homogeneous mixture of two or more substances. Solvent – Single solution component present in greatest amount. Solute(s) – Solution component(s) present in smaller amounts. Solubility – Maximum amount of solute that can dissolve at a given temperature (Note: Is a dynamic equilibrium) Solid Solute Dissolved Solute Saturated Solution – Solution with maximum amount of dissolved solute. Hydration - Attraction of solute ions for water molecules. Solvation - Attraction of solute ions for any solvent molecules. Miscible - Fluids that completely dissolve in each other.

  4. I. Solutions A. Types Types:SoluteSolvent Examples 1 Gas Gas Air (O2 Ar CO2 in N2 ) 2 Gas Liquid Soda Water (CO2 in H2O) 3 Liquid Liquid Ethyl Alcohol in H2O 4 Solid Liquid NaCl in H2O 5 Liquid Solid Hg in Ag – old dental filling 6 Solid Solid Brass – Zn, Sn, Pb, Fe in Cu

  5. I. Solutions B. Rules • General rule for solutions is “like dissolves like” in terms of polarity. Polar solvent can dissolve polar solutes and non-polar solvent can dissolve non-polar solutes. • Examples: • Polar CH3OH will dissolve as a molecule in polar H2O. • Ionic KI will dissolve as ions in polar H2O. • Non-polar C6H14 will not dissolve in polar H2O. • Non-polar C6H14 will dissolve in non-polar CCl4.

  6. I. Solutions B. Some Solubility Rules for IONIC compounds in water (Know These Chem 121 Rules) • All group IA (1), ammonium, acetate & nitrates are soluble. Examples: NaI NH4Cl Ca(C2H3O2)2 Pb(NO3)2 K3PO4 = soluble • All Chlorides - Iodides are soluble except silver, mercury & lead. Examples: CrCl3 = soluble PbBr2 = insoluble AgCl = insoluble • All sulfides are insoluble except for first rule above. Examples: (NH4)2S = soluble CdS= insoluble Ag2S = insoluble • All hydroxidesinsoluble except for first rule above & Ca, Sr, Ba. Examples: Ni(OH)2 = insoluble Al(OH)3 = insoluble Ba(OH)2 = soluble

  7. I. Solutions B. Solubility Rules for ionic compounds in H2O cont . - Why are some ionic compounds insoluble; why are some dissolutions in water endothermic & others exothermic? - Dissolving involves two factors: A - Break lattice structure = Energy required/added. B- Solvation of released parts = Energy released. • Dissolving most compounds is exothermic: B > A • Many ionic compounds are insoluble : A > B Examples: 1)CuSO4 orH2SO4(caution)in water = Exothermic (B >> A) 2) NH4NO3in water = Endothermic (A > B) 3) AgCl, BaSO4, CuS are insoluble ionic compounds (A >> B) Note: Heating the solvent for an insoluble compound usually increases its solubility; can be used for purification – recrystallization.

  8. I. Solutions B. General Rules • Polar CH3OH dissolves in H2O; energy released from H bonds formed. • AgCl is insoluble in water; hydration energy not enough to overcome high lattice energy. • Ionic LiF dissolves in H2O since polar H2O solvates ions (Hydration) which releases enough energy to pull ions out of LiF lattice. F-

  9. I. Solutions B. General Rules - Ivory Soap in water: CH3 - (CH2)16 - C – O- Na+ = O - 1) Water dissolves ionic/polar compounds & 2) Non-polar part of soap dissolves non-polar substances like grease. Soap forms micelles.

  10. I. Solutions B. General Rules – Le Chatelier’s Principle Le Chatelier’s Principle: A system at equilibrium will rearrange to relieve any stress. (Know this) A saturated gaseous solution is in equilibrium as illustrated: CO2 (aq) CO2 (gas) Apply pressure & above equilibrium will rearrange to remove extra pressure (dissolve gas; go to left).

  11. I. Solutions B. Rules - Henry’s Law • In 1803 William Henry studied the effect of pressure on gas solubility. • Henry’s Law: Solubility of a gas (S) α to the partial pressure of the gas above the solution: S1 = k x P1 or S2 = P2(Know these) S1 P1 • Important to a scuba diver; Henry's Law tells us how much N2(g) will be absorbed in our blood at various pressures. • Example: A diver is at 3.0 atm (P1) where solubility of N2 in blood is 53 ug/L (S1). What is the solubility (S2) of N2 in blood when the diver surfaces at 1.0 atm (P2)? S2=P2S2 = P2x S1 = 1.0 atm x 53 ug/L = 18 ug/L (18 ppb) S1 P1 P1 3.0 atm Note: 53 – 18 = 35 ug N2(g) released per liter of blood; get small N2 bubbles in blood.

  12. II. Solution Concentration Terms A. Review - (know all of these) 1. W / W % = g solute x 100 % (also have W / V & V / V %) g solution - 18.0 g NaCl is added to 200. g of water. What is the mass % NaCl? % = 18 g NaCl x 100 % = 8.26 % 218 g soln 2. ppm, ppb, ppt ppm = ug/mLppb = ng/mLppt = pg/mL (Note: g = mL for dilute, aqueous solutions; so, ppm also = ug/g, etc) - 4.2 x 10-8 g of Pb+2 is dissolved in 1000 mL H2O. What is ppt Pb+2 ? 4.2x10-8 g 1012 pg = 42 pg = 42 ppt 1000 mL g mL

  13. II. Solution Concentration Terms A. Review - know 3. Mole Fraction, X = Xa / XtotalNote: X is always ≤ 1.00 - 0.12 mol N2 is mixed with 0.33 mol O2 and 0.01 mol Ar. What is X of N2 XN2 = 0.12 mole (N2) = 0.26 (units cancel) 0.12 + 0.33 + 0.01 mole Total Note: Sum of all Xa’s in a solution = 1.0000 4.Molarity, M = moles solute / L solution M = m / L - 0.80 g of NaOH is dissolved in 200. mL. Calculate the M M = 0.80 g NaOH x 1 mol / 40. g NaOH = 0.10 mol = 0.10 M 0.200 L L Note: Use M1 x V1 = M2 x V2 only for dilution problems (moles initially = moles after)

  14. II. Solution Concentration Terms B. Molality, m 5. molality, m = moles Solute kg Solvent - This concentration term is strange, but useful for colligative property calculations; it’s the only one dealing with amount / “SOLVENT.” Example: 5.7 g of glucose (MW=180) is in 30.9 g of solution. Calculate m. - 5.7 g glucose x (1 mol / 180 g) = 0.032 mol glucose (solute) - 30.9 g soln - 5.7 g solute = 25.2 g solvent = 0.0252 kg solvent m = moles glucose = 0.032 mol glucose = 1.3 m kg solvent 0.0252 kg solvent

  15. III. Colligative Properties A. Vapor Pressure Lowering (VPL) - Colligative Property = Property that depends only on # of solute particles (not on the type of the solute particles). - Examples: VPL, BP elevation, FP depression, Osmosis - VPL = a nonvolatile solute lowers the vapor pressure of a solvent. - VP relationship = Raoult’s Law: Pa = Psa x Xa(Know this) Pa is VP of solvent(in the solution) Psa is VP of pure solvent Xa is the mole fraction of the solvent. - Note: are other forms of Raoult’s Law.

  16. III. Colligative Properties A. Vapor Pressure Lowering (VPL) Example: What is VP & change in VP of 1.00 mol H2O that contains 0.100 mole NaI at 20. oC? Given: VP of H2O (Psa) at 20. oC = 17.5 Torr Pa= Psa x Xa = 17.5 torr xXa Need mole fraction of water: **0.100 mol NaI yields 0.200 mols of particles (Na+ & I-) when it dissolves. **Total mols of particles = 1.00 mol H2O + 0.200 mol ions = 1.20 mols Xa = 1.00 mole H2O / 1.20 mole = 0.833[mole fraction of water] Pa = PsaxXa Pa = 17.5 Torr x 0.833 = 14.5 Torr ΔVP = 17.5 - 14.5 = 3.0 Torr

  17. III. Colligative Properties B. BP Elevation & FP Depression • an added nonvolatile solute lowers MP & raises BP of a solvent; the change in BP or MP depends on the type of solvent and the number of particles of solute dissolved (colligative property). For MP depression:ΔTf = Kfxm (know these) For BP elevation:ΔTb = Kbxm - ΔTf & ΔTb are changes in BP or MP & m = molality of SOLUTE particles. - Kf & Kb are constants in units of oC/m; are unique for each solvent: Kf = 1.86 oC/m for water Kf = 40.0 oC/m for camphor Kb = 0.512 oC/m for water Kb = 3.12 oC/m for acetic acid

  18. III. Colligative Properties B. BP Elevation & FP Depression Example: Calculate the freezing point of a 50.0 % (W/W) ethylene glycol (C2H6O2 or EG) solution in your car radiator? 50.0% - assume 100. g of ethylene glycol is added to 100. g (0.100 kg) of H2O. Kf = 1.86 oC/m for H2O ΔTf = Kfx m = (1.86 oC/m) x ?m 1) Need m of ethylene glycol (MW = 62.0 g/mol) in 50.0 % aqueous soln: - 100. g C2H6O2 x 1 mol EG / 62.0 g EG = 1.61 moles C2H6O2 - m = 1.61 moles C2H6O2 / 0.100 kg H2O = 16.1 mols EG/kg water = 16.1 m 2) ΔTf = Kfxm = (1.86 oC/m) x16.1 m= 30.0 oC . MP = (0.0-30.0)oC = -30.0oC. Car engine protected to -30 oC (-22 oF)

  19. III. Colligative Properties B. BP Elevation & FP Depression • FP or BP changes can be used to determine MW of low MW molecules. • Example: 0.99 g sorbitolin 0.010 kgwater has a MP of -1.0 oC. Calculate the MW of sorbitol. - Problem solving method: MW = g / mol. You are given g; get mol. ΔTf = KfxmGiven: Kf = 1.86 oC/m for water m = ΔTf / Kf = 1.0 oC / 1.86 oC/m = 0.54 m(mol sorbitol per kg water) - (0.54 mol sorbitol / kg water) x 0.010 kgwater = 0.0054 mol sorbitol - MW = g/mol = 0.99 g sorbitol / 0.0054 mol sorbitol = 180 g / mol (2 SF)

  20. III. Colligative Properties B. BP Elevation & FP Depression • Question: An aqueous 1.0 molal solution of ethanol (CH3-CH2-OH) lowers the mp of water by 1.86 oC, but an aqueous 1.0 molal solution of NaCl lowers the mp of water by 3.72 oC (twice that of ethanol). Why? • Answer: In water: 1.0 mol of ethanol yields 1.0 mols of particles; 1.0 mol of NaCl (ionic) yields 2.0 mols of particles (1.0 mol of Na+ & 1.0 mol of Cl-). • Better equation: ΔTf = ixKfxm(know) • i = van’t Hoff factor (pg 517): i= # moles of ions per mole of compound i = 1.0 for nonelectrolyte (CH3OH) i > 1.0 for electrolyte (2.0 for NaCl) Question:Why is i = 1.02 for 1.00 M acetic acid?

  21. III. Colligative Properties C. Osmosis - Jacobus Van’t Hoff received 1st nobel prize in chem. in 1901 for work on solns. Definition of Van’t Hoff Factor: i = # moles of ions per mole of compound. (Know this) - Summary of Colligative Property Equations using the Van’t Hoff factor: - Note: assume i = 1.00 unless problem dictates another value. ΔTf = i x Kfxm ΔTb = i x Kbxm π = i xMx R x T (for osmotic pressure) (Know These) Note: i is automatically included in Raoult’s Law.

  22. III. Colligative Properties C. Osmosis - Osmosis is the net flow of solvent molecules from a pure solvent through a semipermeable membrane into a solution. - Osmotic Pressure (π) is a colligative property & equals the pressure that, when applied to the solution, just stops osmosis.

  23. III. Colligative Properties Examples & Notes Note: During osmosis, water molecules go from the purest water to the lesspure water – from less concentrated to more concentrated. • Skin gets “pruney” when one swims in ocean or takes a long bath. • Red blood cells puff up & burst when placed in deionized water. • Osmotic pressure can be very large • Can use π to obtain MW of large molecules. • We can use reverse osmosis to purify sea water.

  24. III. Colligative Properties Osmosis & Colloids - π = i x M x R x T (Know this) M = Molarity (mols / Lsoln) R = Gas Constant = 0.0821 La/Kmol T in K - Example: Whatis the π of a 0.2 M (i=1.0) soln. at 300 K? • π = 1.0 x 0.2 mol/L x [0.0821 Latm/Kmol] x 300 K = 5 atm (5 atm can support a 1.0 in2 column of water over 150 feet high) - π can be used to determine M of dilute solutions due to large values of π. Useful for determining MW of dilute solutions of high MW molecules - proteins, carbohydrates, nucleic acids

  25. III. Colligative Properties Osmosis – MW example • Problem:Hemocyanin (Hy) is a protein found in crabs. If 1.5 g of Hy dissolved in 0.250 L of water has a π of 0.00370 atm at 277 K, then what is the MW of Hy? Given i = 1.1 for Hy. • π = i x M x R x T MW Hy = g/mol = 1.5g/molM = π / ( i x R x T) 1)M of Hy = (0.00370 a) = 1.48 x 10-4 mol/L 1.1 x (0.0821 La/Km) x 277 K 2)1.48 x 10-4 mol/L x 0.250 L= 3.70 x 10-5 mol Hy 3)MW = g / mole = 1.5 g / 3.70 x 10-5 mol Hy = 41000 g/mol Note: If used mp or bp, the ΔTof this same solution would have been ~10-4oC; much too small to measure accurately.

  26. IV - Colloids - Colloid = dispersion (not solution) of particles of one substance throughout another substance. (Know this) - Colloid differs from solutions in that dispersion particles are usually between 1 and 200 nm in diameter – they are not in solution, but they are small enough to stay in suspension. - Colloids will give Tyndall effect = the scattering of a light beam by the colloidal particles. (Know this) -Three names for colloids: 1) aerosols = liquid/solid dispersion in a gas; 2) emulsion = liquid dispersed in a liquid; 3) sol = solid dispersed in a liquid

  27. IV – Colloids; common names 1) Aerosols= liquids or solids dispersed in a gas Examples: Fog (liquid water in air) Dust in air (solid dirt in air) 2) Emulsions= liquids dispersed in a liquid Examples: Mayonnaise (oil in water) Milk (fat in water) 3) Sols= solids dispersed in a liquid Examples: Jell-O (collagens in water) Milk (casein in water)

  28. IV . Colloids - Tyndall Effect

More Related