1 / 22

Midterm Exam

Midterm Exam. One-week take-home exam, to cover material of HW#1-6 Averaged switch modeling Simulation Extra element theorem Input filter design N-extra element theorem Feedback theorem DCM modeling On-campus: handed out this Friday March 6, due at beginning of class of Friday March 13

chesna
Download Presentation

Midterm Exam

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Midterm Exam • One-week take-home exam, to cover material of HW#1-6 • Averaged switch modeling • Simulation • Extra element theorem • Input filter design • N-extra element theorem • Feedback theorem • DCM modeling • On-campus: handed out this Friday March 6, due at beginning of class of Friday March 13 • Off-campus: start exam at time of your choosing, after you at least have completed HW#6.

  2. Sampling v*(t) v(t) T Sampler v(t) t v*(t) t Unit impulse (Dirac)

  3. Unit impulse d(t) area = 1 s(t) t Dt Properties Laplace transform unit step

  4. Sampling in frequency domain

  5. Sampling in frequency domain: derivation

  6. Sampling in frequency domain: derivation

  7. Aliasing

  8. Zero-order hold v*(t) H vo(t) Zero-order hold v*(t) t vo(t) t nT (n+1)T (n+2)T T = sampling period 1/T = sampling frequency

  9. Zero-order hold: time domain H d(t) vo(t) Zero-order hold

  10. Zero-order hold: frequency domain H u(t) vo(t) Zero-order hold

  11. Sampled-data system example: frequency domain v*(t) H v(t) vo(t) T Sampler Zero-order hold Consider only low-frequency signals: System “transfer function” =

  12. Zero-order hold: frequency responses

  13. Zero-order hold: frequency responses fs = 1 MHz MATLAB file: zohfr.m

  14. Zero-order hold: 1st-order approximation 1st-order Pade approximation

  15. Zero-order hold: frequency responses fs = 1 MHz MATLAB file: zohfr.m

  16. How does any of this apply to converter modeling?

  17. PWM is a small-signal sampler! PWM sampling occurs at tp (i.e. at dTs, periodically, in each switching period)

  18. General sampled-data model • Sampled-data model valid at all frequencies • Equivalent hold describes the converter small-signal response to the sampled duty-cycle perturbations [Billy Lau, PESC 1986] • State-space averaging or averaged-switch models are low-frequency continuous-time approximations to this sampled-data model

  19. Application to DCM high-frequency modeling iL c dTs d2Ts Ts

  20. Application to DCM high-frequency modeling iL c dTs d2Ts Ts

  21. DCM inductor current high-frequency response High-frequency pole due to the inductor current dynamics in DCM, see (11.77) in Section 11.3

  22. Conclusions • PWM is a small-signal sampler • Switching converter is a sampled-data system • Duty-cycle perturbations act as a string of impulses • Converter response to the duty-cycle perturbations can be modeled as an equivalent hold • Averaged small-signal models are low-frequency approximations to the equivalent hold • In DCM, at high frequencies, the inductor-current dynamic response is described by an equivalent hold that behaves as zero-order hold of length D2Ts • Approximate continuous-time model based on the DCM sampled-data model correlates with the analysis of Section 11.3: the same high-frequency pole at fs/(pD2) is obtained • Next: current-mode control (Chapter 12)

More Related