50 likes | 298 Views
Signature Analyser. Function Review by Yolanda Kong and Russell Cayzer CNT 1A. Signature Analyzer’s Process. Convert the lengthy serial data stream of a micro-processor based product into a four digit signature. Signature Analyzer’s Purpose.
E N D
Signature Analyser Function Review by Yolanda Kong and Russell Cayzer CNT 1A
Signature Analyzer’s Process • Convert the lengthy serial data stream of a micro-processor based product into a four digit signature
Signature Analyzer’s Purpose • Can function as a troubleshooter of microprocessor-based products • Each node produces a documented signature when a specific mode of operation is engaged • Matching codes are contained in the product service manual • The signature analyzer reads the node’s code and visually displays it • A miss-match points to a fault
An Example of a Fault • The signature table states that the code at A2 should read HHCO ( to be found in the service manual) • If the Signature Analyzer’s display does not match the service manual’s code with the probe on A2 a fault exists
Conclusion • The signature analyzer is a most useful fault locator • The operation is fast and a problem area can be determined with some basic troubleshooting concepts • This device incorporates a minimum amount of hardware alteration and no software changes at all