1 / 20

Resistance-Start Split-Phase Motor

Resistance-Start Split-Phase Motor. R = R ext. Graphical Analysis. I aux decreases with increasing R ext. angle α increases with increasing R ext. Locked-rotor Torque “peaks” for an “optimal” value of R ext . Phase displacement angle α is between 25° and 30°.

cheyenne
Download Presentation

Resistance-Start Split-Phase Motor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Resistance-Start Split-Phase Motor R = Rext

  2. Graphical Analysis Iaux decreases with increasing Rext angle α increases with increasing Rext Locked-rotor Torque “peaks” for an “optimal” value of Rext . Phase displacement angle α is between 25° and 30°.

  3. Practical Resistance-Start Motor “Centrifugal” switch or TRIAC Closed (shorted) when the motor is at rest Opens when motor speed is 75% – 85% of synchronous speed

  4. Practical Resistance-Start MotorPhasor Diagram at start-up

  5. Torque-Speed Characteristic

  6. Cutaway view of a Split-Phase Motor

  7. Capacitor-Start Split-Phase Motor Develop a larger value of Iaw sinα, and, hence, a larger locked-rotor torque Phase-displacement angle between 75° and 85°

  8. Capacitor-Start MotorPhasor Diagram at start-up

  9. Torque-Speed Characteristic Higher Starting Torque Same Running Torque as before

  10. Permanent-Split Capacitor Motor • Uses a permanently-connected auxiliary circuit containing a capacitor. • Smoother and quieter operation than resistor or capacitor starting motor • Speed control by autotransformer across the line, or external resistor or reactor (inductor) in series with the main or auxiliary winding (or both).

  11. Permanent-Split Capacitor Motor “Permanent” Capacitor Speed control by autotransformer

  12. Two-Value Capacitor Motor Small capacitor for running main Large capacitor for starting auxiliary Centrifugal switch

  13. Example 6-2 • Using the motor from Example 6-1, determine the capacitance required in series with the auxiliary winding in order to obtain a 90° phase displacement between the current in the main winding and the current in the auxiliary winding at locked-rotor and the locked-rotor torque in terms of the machine constant.

  14. Example 6-2 continued • From Example 6-1

  15. Phasor Diagram

  16. Modified Circuit

  17. Impedance Diagram for Auxiliary Winding

  18. Calculation of Capacitance

  19. Locked-rotor Torque

  20. Graphical Analysis Auxiliary winding current increases then decreases with increasing capacitive reactance (why?) Angle α increases with increasing capacitive reactance Locked-rotor torque “peaks” for the optimal value of capacitive reactance. The resulting phase displacement angle is approximately 75°

More Related