420 likes | 564 Views
Harmonic Motion and Waves. Chapter 14. Hooke’s Law. x = 0. We assume that the surface is frictionless. There is a point where the spring is neither stretched nor compressed; this is the equilibrium position. We measure displacement from that point (x = 0 ). m.
E N D
Harmonic Motion and Waves Chapter 14
Hooke’s Law x = 0 We assume that the surface is frictionless. There is a point where the spring is neither stretched nor compressed; this is the equilibrium position. We measure displacement from that point (x = 0 ). m If an object vibrates or oscillates back and forth over the same path, each cycle taking the same amount of time, the motion is called periodic (T).
Hooke’s Law F m x x = 0 The restoring force exerted by the spring depends on the displacement: m The minus sign on the force indicates that it is a restoring force – it is directed to restore the mass to its equilibrium position.
Hooke’s Law F x m (k) is the spring constant Displacement (x) is measured from the equilibrium point Amplitude (A) is the maximum displacement A cycle is a full to-and-fro motion Period (T) is the time required to complete one cycle Frequency (f) is the number of cycles completed per second - Units are called Hertz (Hz)
Hooke’s Law mg If the spring is hung vertically, the only change is in the equilibrium position, which is at the point where the spring force equals the gravitational force. xo m Equilibrium Position
Hooke’s Law Any vibrating system where the restoring force is proportional to the negative of the displacement moves with simple harmonic motion (SHM), and is often called a simple harmonic oscillator.
Hooke’s Law Example: If 3 people (m = 250 kg) get into a car and the springs compress 5.0 cm, what is the spring constant (k)?
Elastic Potential Energy Potential energy of a spring is given by: The total mechanical energy is then: The total mechanical energy will be conserved
Elastic Potential Energy x = 0 If the mass is at the limits of its motion, the energy is all potential. vmax A If the mass is at the equilibrium point, the energy is all kinetic. m m Hippo physics mass spring 1,3
Comparing Simple Harmonic Motion with Circular Motion An equation of motion gives the position of an object as a function of time. Simple harmonic motion can be represented as a component of uniform circular motion: Hippo physics 1,4,5
Vibrations and Waves A mass on a spring undergoes SHM. When the mass passes through the equilibrium position, its instantaneous velocity (A) is maximum. (B) is less than maximum, but not zero. (C) is zero. (D) cannot be determined from the information given.
Vibrations and Waves A mass is attached to a vertical spring and bobs up and down between points A and B. Where is the mass located when its kinetic energy is a minimum? (A) at either A or B (B) midway between A and B (C) one-fourth of the way between A and B (D) none of the above
Vibrations and Waves A mass is attached to a vertical spring and bobs up and down between points A and B. Where is the mass located when its potential energy is a minimum? (A) at either A or B (B) midway between A and B (C) one-fourth of the way between A and B (D) none of the above
The Simple Pendulum A simple pendulum consists of a mass at the end of a lightweight cord. We assume that the cord does not stretch, and that its mass is negligible.
Vibrations and Waves A simple pendulum consists of a mass M attached to a weightless string of length L. For this system, when undergoing small oscillations (A) the frequency is proportional to the amplitude. (B) the period is proportional to the amplitude. (C) the frequency is independent of the length L. (D) the frequency is independent of the mass M.
Wave Description Frank Oppenheimer demonstrates that a pendulum swinging back and forth traces out a straight line over a stationary surface, and a sine curve when the surface moves at constant speed.
Wave • Rhythmic disturbance that carries energy through matter or space
Wave pulse • Single bump or disturbance that travels through a medium
Continuous wave • A regularly repeating sequence of wave pulses
Wave Motion Transverse wave - a wave travels along its medium, but the individual particles just move up and down, vibrates perpendicular to the direction of the wave Velocity of wave Velocity of particle
Wave Motion • Wave characteristics: • Amplitude, A • Wavelength, λ • Frequency f and period T • Wave velocity
Amplitude of a wave • Maximum displacement from its position of rest, or equilibrium • Waves with larger amplitudes transfer more energy • For waves that move at the same speed, the rate at which energy is transferred is proportional to the square of the amplitude • Doubling the amplitude of a wave increases the amount of energy it transfers each second by a factor of four
Types of Waves: Transverse and Longitudinal The motion of particles in a wave can either be perpendicular to the wave direction (transverse) or parallel to it (longitudinal).
Longitudinal wave • The disturbance is in the same direction as, or parallel to, the direction of wave motion • Sound waves • Liquids and gases usually transmit only longitudinal waves
Transverse waves can occur only in solids, whereas longitudinal waves can travel in solids, fluids, and gases. • Transverse motion requires that each particle drag with it adjacent particles to which it is tightly bound. • In a fluid this is impossible, because adjacent particles can easily slide past each other. • Longitudinal motion only requires that each particle push on its neighbors, which can easily happen in a fluid or gas. • The fact that longitudinal waves originating in an earthquake pass through the center of the earth while transverse waves do not is one of the reasons the earth is believed to have a liquid core.
Incident wave • Wave that strikes the boundary between two mediums
Law of reflection* • Angle of incidence is equal to the angle of reflection
Reflected wave* • A returning wave that is either inverted or displaced in the same direction as the incident wave
Reflection and Transmission of Waves Whether or not a wave is inverted upon reflection depends on whether the end is free to move or not.
Reflection and Transmission of Waves A wave traveling from one medium to another will be partly reflected and partly transmitted.
Principle of superposition • The displacement if a medium caused by two or more waves is the algebraic sum of the displacements of the individual waves.
Interference; Principle of Superposition The superposition principle says that when two waves pass through the same point, the displacement is the arithmetic sum of the individual displacements. The figure below exhibits constructive and destructive interference.
Wave interferenceDestructive interference Superposition of waves with equal but opposite amplitudes
Wave interferenceConstructive interference Superposition of waves resulting in increased wave displacement
Interference; Principle of Superposition These figures show the sum of two waves. In (a) they add constructively. (In phase) In (b) they add destructively. (Out of phase) In (c) they add partially destructively. + + + = = = (a) (b) (c)
Surface waves • Have characteristics of both transverse and longitudinal waves • Waves deep in the ocean are longitudinal, at the surface of the water, the particles move in a direction that is both parallel and perpendicular to the direction of the wave motion.
Standing Waves Standing wave Wave with stationary nodes and antinodes
Standing Waves Node – Stationary point where two equal wave pulses meet and displacement is zero Antinodes – The point of largest amplitude when two wave pulses meet of two superimposed waves
Refraction of waves • A change in the direction of waves crossing a boundary between two different media
Diffraction* The bending of waves around a barrier