1 / 16

Tidal Datums

Tidal Datums. Text and Figures Source: NOAA/NOS CO-OPS Tidal Datums related publications. What is Tidal Datum ?.

china
Download Presentation

Tidal Datums

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tidal Datums Text and Figures Source: NOAA/NOS CO-OPS Tidal Datums related publications

  2. What is Tidal Datum ? For marine applications, a base elevation used as a reference from which to reckon heights or depths. It is called a tidal datum when defined in terms of a certain phase of the tide. Tidal datums are local datums and should not be extended into areas which have differing hydrographic characteristics without substantiating measurements. In order that they may be recovered when needed, such datums are referenced to fixed points known as bench marks.

  3. What is Chart Datum ? The datum to which soundings on a chart are referred. It is usually taken to correspond to a low-water elevation, and its depression below mean sea level is represented by the symbol Z;. Since 1980, chart datum has been implemented to mean lower low water (MLLW) for all marine waters of the United States, its territories, Commonwealth of Puerto Rico, and Trust Territory of the Pacific Islands. See datum and National Tidal Datum Convention of 1980.

  4. What is a Bench Mark ? A fixed physical object or mark used as reference for a horizontal or vertical datum. A tidal bench mark is one near a tide station to which the tidal datums are referenced. A primary bench mark is the principal mark of a group of tidal bench marks to which the tidal datums are referenced. The overall quality of datums is dependent on both the quality of the bench mark and the quality of the leveling between the bench marks and the tidal gauges.

  5. Types of Tides Semidiurnal Tide Mixed Tide Diurnal Tide

  6. MHHW

  7. Principal tidal datums related to a beach profile

  8. Datum Definitions Mean Sea Level (MSL) is a tidal datum determined over a 19-year National Tidal Datum Epoch, a time period that approximates the variation in the path of the moon about the sun (regression of the moon’s nodes). MSL pertains to local mean sea level and should not be confused with the datums of North American Vertical Datum of 1988 (NAVD 88) which are a fixed reference for elevations determined by geodetic leveling.

  9. Datum definitions contd.. National Geodetic Vertical Datum of 1929 (NGVD 29) is a fixed datum adopted as a national standard geodetic reference for heights, but is now considered superceded. NGVD 29 is sometimes referred to as Sea Level Datum of 1929 or as Mean Sea Level on some early issues of Geological Survey Topographic Quads. NGVD 29 was originally derived from a general adjustment of the first-order leveling networks of the U.S. and Canada after holding mean sea level observed at 26 long term tide stations as fixed. Numerous local and wide-spread adjustments have been made since its establishment in 1929. Bench mark elevations relative to NGVD 29 are available from the National Geodetic Survey (NGS) data base via the World Wide Web.

  10. Datum definitions contd.. North American Vertical Datum of 1988 (NAVD 88) is a fixed datum derived from a simultaneous, least squares, minimum constraint adjustment of Canadian/Mexican/United States leveling observations. Local mean sea level observed at Father Point/Rimouski, Canada was held fixed as the single initial constraint. NAVD 88 replaces NGVD 29 as the national standard geodetic reference for heights. Bench mark elevations relative to NAVD 88 are available from NGS through the World Wide Web.

  11. Datum definitions contd..

  12. Principal Tidal datums and their relationship to geodetic datum NGVD 1929 for a typical mixed curve (should this read “typical mixed tide?”

  13. Significance of Datums in Marine Applications I would also add that efforts are currently focused on defining a global vertical datum and that the ellipsoid has been suggested because vertical coordinates provided by GPS can be translated into a coordinate referenced to a tidal datum plane using a set of vertical transformation functions.

  14. Applications of Tidal DatumsTidal datums are chiefly used to determine horizontal boundaries and for estimating heights or depths. They are created to serve the needs of a variety of users, including mariners, engineers, scientists, and the general public. While a vertical datum is the fixed base elevation used as a reference from which relative heights or depths are determined, tidal datums are defined by a certain phase of the tide. Different user groups use tidal datums defined by different phases of the tide. Examples of applications of tidal datums by the following users are provided below. Boaters/Shipping The depths on nautical charts in U.S. coastal waters are referenced to mean lower low water (MLLW). The reference base of the heights of structures on nautical charts (e.g. bridge clearance) is mean high water (MHW). Using MLLW provides pilots with a margin of safety consistent with average meteorological conditions. Storm Surge/Emergency Management Planners (EMP) Storm surge, measured as the difference between observed water levels and the elevation of the astronomically predicted tide, can cause injury, death, property damage, damage to structures, avulsion, and erosion. EMP use all tidal datums at their disposal (e.g. MLLW, mean higher high water (MHHW), and National Geodetic Vertical Datum of 1929 (NGVD 29), as well as historical data in their planning activities. Modelers Physical, chemical, and biological properties of the ocean-atmosphere-terrestrial system may be predicted by advanced hydrodynamical numerical models. When these models are used to predict things like tides, water levels and storm surges, the accuracy of their sea surface height fields are evaluated and calibrated by data from multiple vertical tidal and geodetic datums.

  15. Website links NOAA/NOS CO-OPS Tide Datums and Their Applications Tide and Currents Glossary Computational Techniques for Tidal Datums

More Related