1 / 8

Building Systems for Interior Designers

Building Systems for Interior Designers. September 1, 2010. Gabriel Rodriguez Romina Vignolo Francine Rozental Jackie Esteban. Roof and Ceiling. A-211A Ceiling Detail Including Plenum. A-206 Roof is insulated With R19 insulation. Roofing Details. A-907 Roof details.

cian
Download Presentation

Building Systems for Interior Designers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Building Systems for Interior Designers September 1, 2010 Gabriel Rodriguez Romina Vignolo Francine Rozental Jackie Esteban

  2. Roof and Ceiling A-211A Ceiling Detail Including Plenum A-206 Roof is insulated With R19 insulation

  3. Roofing Details A-907 Roof details

  4. Section & Elevation A-308 Section detailing wall construction and plenum conditions A-302 Elevation shows windows details

  5. Ceiling A-901 Ceiling and Soffit Details showing type of ceiling and plenum conditions which contributes to the heating and cooling of the space.

  6. Wall Assembly Rigid insulation is often applied to the outside of the building. It offers a barrier to radiant heat. Reflected insulation uses material of high reflectivity and low emissivity, such as aluminum foil in conjunction with dead-air space to reduce the transfer of radiant heat. These wall assembly show the wall construction that allows to read heat gain/loss inside the interior spaces. Absorbance and Radiation are also considered in these conditions. A-604 Wall Assemblies , Gypsum wall board A-604 stucco finish A-604 Metal studs

  7. Cooling Systems M-400 Diffusers have slots that deflect air in various directions in interior spaces.

  8. Window Details A-716 Window details including connections to the structure and construction that will benefit the Thermal conditions.

More Related