30 likes | 181 Views
Two accounts information are needed for the testing!. Single Line Telephone. PSTN. Proxy Server. Registrar Server. VoIP provider. DSL modem. Router. Internet Telephony Service provider. SIP Phone. Account 1. Account 2. - User ID: xxxx - Password: xxxx - Proxy Server: xxxx
E N D
Two accounts information are needed for the testing! Single Line Telephone PSTN ProxyServer RegistrarServer VoIP provider DSL modem Router Internet Telephony Service provider SIP Phone Account 1. Account 2. - User ID: xxxx - Password: xxxx - Proxy Server: xxxx - Registrar Server: xxxx ( Sometimes Registrar Server is same with Proxy Server) - Telephone Number: xxxx - User ID: xxxx - Password: xxxx - Proxy Server: xxxx - Registrar Server: xxxx ( Sometimes Registrar Server is same with Proxy Server) - Telephone Number: xxxx
SIP Interoperability Testing plan. PCC needs your support for following purple color part. Account Info 1 day account check SIP IOT IOT Result Analysis FT Sales Company start Field Trial for 20 working days. Sales Company reports to PCC the FT result. PCC analyses the SIT* result and decide starting FT or not. Sales Company start SIP IOT* using config which PCC informed.Sales Company reply to PCC the test result and captured data. PCC check the account info briefly. PCC reply to Sales Company with SIP-GW4 config. Discuss with PCC sales about new provider.Getting 2 accounts for interoperability testing. * SIP IOT: SIP Interoperability Testing.
Detail Info [ITSP Essential information] 01 Provider name : 02 Provider type ISP or Carrier : 03 Type of the network : Closed / Open 04 Provider URI : http:// 05 Management site : http:// > Login ID : > Login Password : 06 Address (Country) : 07 Area code : 08 The method of an international call : [Service interface functionalities] 10 CLIP* Support : 11 CLIR* Support : Star Code for CLIP/CLIR : WEB setting : 12 FAX relay (T.38) Support : 13 DTMF (RFC2833) Support : 14 Hold Support : 15 Transfer Support : 16 Conference Support : 17 DDI Support : 18 VAD* Support : 19 STUN Support : 20 SBC (Session Border Controller) Support : [SIP Telephone Settings Essential information] <Server Settings> 30 Proxy Server <compulsory> : 31 Proxy Server port : 32 Registrar Server : 33 Domain Name : <Account Settings 1> 40-1 SIP Account <compulsory> : 41-1 Authentication ID <compulsory> : 42-1 Authentication Password <compulsory> : 43-1 Incomming Number <compulsory> : 44-1 DDI Number : <Account Settings 2> 40-2 SIP Account <compulsory> : 41-2 Authentication ID <compulsory> : 42-2 Authentication Password <compulsory> : 43-2 Incomming Number <compulsory> : 44-2 DDI Number : <Codec Settings> 50 Codec : 51 Packet Interval : 52 VAD : 53 DTMF relay : CLIP: Calling Line Identification Presentation CLIR: Calling Line Identification Restriction Star code is a special code which provider support. In case of Bellshare (German provider) *67 is used for CLIR. When you call *67+area code + phone number then it become a CLIR call. There are other way to stop Caller ID sending if provider support. Logging into the provider web site (using 05) and CLIP off. (Some provider permit user to change some setting on their management site.) VAD:Voice Activity Detection If it work correctly then voice packet traffic become reduced so it is good. But it rarely cause a trouble. Bad voice quality or call cut off. STUN / SBC. Please refer the “Programming Manual for SIP”.