What are the Common Mistakes to Avoid When Installing an Electric Fence

1. What are the Common Mistakes to Avoid When Installing an Electric Fence Invisible fences contain pet dogs within the property boundary to be safe. It is a combination of buried wire, transmitter with signal, and electric shocks to the dog's receiver collar through batteries. Since its patent in 1973, it has saved dogs from being hit by vehicles and other dangers worldwide for nearly half a century. The invisible fences to become invincible should avoid many common mistakes while installing them. Apart from using high-quality batteries, it is essential to give proper training to get the invisible fence's many benefits. So, check out the common mistakes to avoid when installing an electric fence to keep your pet dogs safe within the property boundaries. The below common mistakes and the facts about using the right invisible fence batteries will convince anyone to buy the high quality for taking good care of their loved pet dogs.

2. What are the common mistakes to avoid when installing an electric fence Having an electric fence is cheaper than the traditional wood or iron fences. They do not only spoil the property's good looks but also need to take care periodically spending a lot of money. And the dogs that are intelligent enough will find ways like digging a hole beneath the fence to escape outside. Hence it is only the invisible fences that are inexpensive and also the best way to keep the dogs' safe within the boundaries. But there are many mistakes that most people make while installing invisible fences. The dogs may use these mistakes to escape outside to be in danger and not solve the fundamental purpose of the invisible fence. A few of the common mistakes include. Not providing adequate earth grounding for the galvanized rods attached to clamps may send weak signals and electric corrections for the dogs not to receive it properly.  Not maintaining proper proximity of 15 yards between the posts to come out of the ground and come out of the ground.

3.  Using too much wire instead of the maximum limit of 5,000 feet for adding elasticity to it and eliminating any wire breakage risk  Not properly removing the wires of the old fences when coming into contact with the new wires may lead to short circuits to scare the dogs.  Leaving the bottom wires to be in contact with the wet vegetation to absorb the battery charges and hence send weak signals and shocks that is insufficient for the dogs to stay inside the property  Not using high-quality insulators, conductors, and wire as sunlight deteriorates plastic and the wet vegetation causing damage to them not to work properly Why are the best invisible fence batteries essential for keeping the dogs safe One of the most common mistakes many make while installing the electric fence is not using high-quality invisible fence batteries. With a defective battery, the entire invisible fence system will fail to provide the intended protection to the dog. It is because the dogs do not send the warning signals properly when they exceed certain limits. Since the dogs do not

4. warn signals, they come close to the boundary and may cross it if not given the electric shock. Hence, the dogs become vulnerable to many dangers, including speeding vehicles. And also, with low batteries, it is impossible to give the right electric correction level to the dogs as per their sensitivity and responsiveness. It may cause a lot of hardships to the dogs, like getting frightened and confused. Contact us Address : JLX technologies 14033 Commerce Ave Suite 300-316 Prior Lake, MN 55372 Phone : 9524269961 Email : sales@circuitcell.com Thank you