1 / 5

MSP430 外部燒錄 器 ( for Octopus II ) 安裝 使用方式

MSP430 外部燒錄 器 ( for Octopus II ) 安裝 使用方式. 安裝 燒錄 軟體 FET-Pro430. 請 至此 下載 燒錄 軟體並安裝 http:// www.elprotronic.com/files/FET-Pro430-Lite-Setup.zip. 安裝 MSP-FET430UIF 驅動程式.

ciro
Download Presentation

MSP430 外部燒錄 器 ( for Octopus II ) 安裝 使用方式

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MSP430外部燒錄器(for Octopus II)安裝使用方式

  2. 安裝燒錄軟體FET-Pro430 • 請至此下載燒錄軟體並安裝http://www.elprotronic.com/files/FET-Pro430-Lite-Setup.zip

  3. 安裝MSP-FET430UIF驅動程式 • 安裝完燒錄軟體FET-Pro430後，請到C:\Program Files (x86)\Elprotronic\MSP430\FET-Pro430\USB-Driver\CDC-Certified目錄中點選 “DriverInstaller.exe” ，以安裝驅動程式 • MSP-FET430UIF用USB線接上PC後，便會自動找到驅動程式並安裝

  4. 燒錄介面FET-Pro430 選擇要燒錄的hex檔 開啟/關閉燒錄板的電源 Octopus II用的MSP430型號是 MSP430F1611 選完hex檔後，按下此鈕即會開始燒錄 注意: 因FET-Pro430只認得 .hex檔，需手動將TinyOS編譯出的 .ihex副檔名改名為 .hex 記得將Octopus上的電源開關調到ON的位置

  5. 燒錄成功畫面 燒錄成功，下方會全部都呈現打勾狀態，並顯示PASS

More Related