1 / 13

Experiment 4 Determination of the Composition of A Compound

Experiment 4 Determination of the Composition of A Compound. Purpose and Goals. A reaction between magnesium and oxygen will be carried out and the percentage composition of the product (MgO) will be determined. 1. Equations for Mg combustion in air. Mg + O 2  MgO Mg + N 2  Mg 3 N 2.

clancy
Download Presentation

Experiment 4 Determination of the Composition of A Compound

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Experiment 4Determination of the Composition of A Compound

  2. Purpose and Goals A reaction between magnesium and oxygen will be carried out and the percentage composition of the product (MgO) will be determined

  3. 1. Equations for Mg combustion in air • Mg + O2  MgO • Mg + N2  Mg3N2

  4. To convert Mg3N2 to MgO • Mg3N2 Mg(OH)2 MgO H2O Heating

  5. 2. Reminders • Do not wash the crucible and lid when you obtain them. Also, do not scrape the inside of the crucible. • Always use the crucible tongs to hold the crucible. • Use the last weight for your calculation, not the average of the 1st, 2nd and/or 3rd heatings. • Wear the safety goggles.

  6. 3. Experimental Procedure Experimental Set-up for Heating Magnesium

  7. Experimental Procedure 1. Heat the empty crucible + lid (gently 3 min, strongly 5 min, cool and weigh) record weight of crucible + lid 1st____g 2nd____g 3rd____g until the difference is <0.002 g 2. Weight of crucible + lid + Mg _____g (Mg 0.4~0.6g, generally 3-4 ribbons are needed)

  8. Experimental Procedure 3. Heat the crucible. Use the tongs to hold the lid above the crucible. At the instant the Mg ignites, cover the crucible with the lid quickly. 4. After a brief period, raise the lid and allow the Mg to burn again. Replace the lid at once. 5. Repeat the above step until the contents in the crucible no longer burn.

  9. Experimental Procedure 6. Heat the crucible strongly for 5~10 min with a small opening between the crucible and lid. Let them cool to room temperature. 7. Add 10 drops of distilled water to the crucible. (to convert Mg3N2 to Mg(OH)2) 8. Reheat the crucible and cover gently at first and then strongly for 5~10min. ( to convert Mg(OH)2 to MgO)

  10. Experimental Procedure 9. After cooling and weighing, record the mass of crucible , lid and MgO 10. Repeat 8-9, record the mass after the 2nd heating 11. Compare the mass of 2nd heating with that of 1st heating. Make sure you get the constant weight. (difference < 0.002g)

  11. 4. Calculations • Weight of MgO = Wcrucible+lid+MgO -Wcrucible+lid • Weight of Mg = Wcrucible+lid+Mg - Wcrucible+lid • Weight of oxygen= WMgO -WMg

  12. Calculations (Con.) • % of oxygen = Woxygen / WMgO * 100% • % of magnesium = WMg / WMgO * 100%

  13. Calculations (Con.) • % of oxygen calculated from MgO = AWoxygen/ MWMgO *100% • % error =(experimental value- calculated value) / calculated value *100% **AW=atomic weight MW=molecular weight

More Related