1 / 10

Wireless Remote Controller (MR-AH01/BH01)

Wireless Remote Controller (MR-AH01/BH01). HQ SE. Features. On/Off control Air flow control Temperature setting Filter reset Louver Control Simple ON/OFF schedule Service Mode - Main/RMC address check - Communication status check.

cleave
Download Presentation

Wireless Remote Controller (MR-AH01/BH01)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Remote Controller (MR-AH01/BH01) HQ SE

  2. Features • On/Off control • Air flow control • Temperature setting • Filter reset • Louver Control • Simple ON/OFF schedule • Service Mode - Main/RMC address check - Communication status check For MR-BH01, real time clock is not supported ! Main Difference • MR-AH01 : ON/OFF schedule time Increase only • MR-BH01 : ON/OFF schedule time Increase/Decrease both Wireless remote controller MR-AH01 MR-BH01

  3. 1. Remove one battery from the wireless remote controller. 2. Press + together and put the battery back to enter the option code setting mode. 3. Use the Mode button to toggle the option code page. 4. Press the Set/Cancel button to change the option code. Option code setting mode (MR-AH01) Entering option code mode Setting option code Toggle option code page Set option code

  4. 1. Remove one battery from the wireless remote controller. 2. Press + together and put the battery back to enter the option code setting mode. 3. Use the Mode button to toggle the option code page 4. Press Power button to change the option code. Option code setting mode (MR-BH01) Entering option code mode Setting option code Set option code Toggle option code page Press together

  5. Option code setting mode (Neo forte R/C) 1. Remove one battery from the wireless remote controller. 2. Press Temp ▲▼ together and put the battery back to enter the option code setting mode. 3. Set option code 2 digits. And press “Mode” and set next 2 digits. 4. Press the On/Off power button to change the option code. Entering option code mode Setting option code <Initial display>

  6. Option code setting mode (Neo forte R/C) <Example : 027402 – 14221A – 200001 - 300000> ※ Only blue colored 20 digits should be set 1) Set 2 digits using Temp ▲▼button 2) Press “Mode” , then ◀ will move to down. Set next 2 digit 3) After setting 10 digits, press “Mode” 4) Then “OFF timer” is displayed. 5) Set next 2 digit. 6) After setting completion, press “On/Off”

  7. Func1 Func2 Mode Service mode (MR-AH01) 1. Remote one battery from the wireless remote controller. 2. Press + together and put the battery back to enter the Service Mode. NOTE : Whenever Mode, Func1 and Func2 are changed, signal wave is transmitted from the wireless remote controller. Entering service mode Selecting service mode Press Set/Cancel button

  8. Press Set/Cancel button Service mode (MR-BH01) 1. Remote one battery from the wireless remote controller. 2. Press + together and put the battery back to enter the Service Mode. NOTE : Whenever Mode, Func1 and Func2 are changed, signal wave is transmitted from the wireless remote controller. Selecting service mode Entering service mode Func1 Func2 Mode Press together

  9. Service mode

  10. Service mode NOTE : Service mode 10,11 and 13 are not allowed for COM1-only indoor units. NOTE : Exit the service mode by pressing any general keys in the Normal mode. NOTE : Applied for Cassette/Duct indoor units (not for Wall-mount indoor units)

More Related