1 / 5

Clocks of TIME

Clocks of TIME. Day 3. Save “. ai ” file onto a flash drive to plug into the computer hooked up to the laser etcher. Laser Etcher Demo. Open in Corel Draw Change any vector lines that you want CUT THROUGH to hairline RED. Safety and Rules. Do NOT open machine while it is operating

clio
Download Presentation

Clocks of TIME

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Clocks of TIME Day 3

  2. Save “.ai” file onto a flash drive to plug into the computer hooked up to the laser etcher. Laser Etcher Demo

  3. Open in Corel Draw • Change any vector lines that you want CUT THROUGH to hairline RED

  4. Safety and Rules • Do NOT open machine while it is operating • Turn on the ventilation while it is operating • Don’t stare at the laser for too long because it can cause eye damage • Turn off laser when not in use • Watch the machine to make sure that it is operating correctly

  5. Tutorial • If you ever forget or need to be reminded of your next step you can CAREFLLY READ this tutorial: • http://www.csufablab.org/wp-content/uploads/2013/09/Laser-step-by-step-tutorial.pdf

More Related