1 / 28

Breaching System Views

Breaching System Views. Safety First. Breaching system can conduct electricity Do not use in flammable atmosphere Use proper personal protective equipment Gasoline is explosive Spinning motion produces torque. System Set-Up. System Set-Up. Remove accessories from case.

cody
Download Presentation

Breaching System Views

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Breaching System Views

  2. Safety First • Breaching system can conduct electricity • Do not use in flammable atmosphere • Use proper personal protective equipment • Gasoline is explosive • Spinning motion produces torque

  3. System Set-Up

  4. System Set-Up Remove accessories from case Mount water collar to output shaft

  5. System Set-Up Copper washer prevents binding Select proper bit and thread onto spindle

  6. Starting Engine

  7. Starting Engine • Fill with gasoline • Open fuel valve at bottom of tank

  8. Starting Engine Prime carburetor

  9. Starting Engine Close choke

  10. Starting Engine Throttle to half-open

  11. Starting Engine Switch ignition to ‘start’

  12. Starting Engine Pull handle until unit starts

  13. Coring Bits

  14. Coring Bits • Carbide Bit • Diamond Segment Bit

  15. Coring Bits • Cuts through concrete, masonry, stone, rebar • Must be cooled with water during cutting • Diamond Segment Bit

  16. Coring Bits • Cuts through wood, sheet metal, roofing material • Do NOT USE water during cutting with the carbide bit • Carbide Bit

  17. System Care

  18. System Care • Always use freshly-mixed fuel at 25:1 gasoline/oil ratio • Clean or replace fuel filter (inside fuel tank) after every 10 hours of operation Engine Maintenance

  19. System Care • Clean air filter (inside side cover) after every 10 hours of operation • Check spark plug for fouling • Change gear oil every 20 hours of operation Air Filter

  20. System Care • Inspect water collar for free motion, leaks around seals • After each use, spray a few drops of oil into the engine cylinder Water Collar

  21. System Care • Inspect and clean the bit with a wire brush • Check for roundness, dents, etc. • If diamond flakes are obscured, ‘dress’ the bit by drilling into a masonry block or asphalt • Inspect mounting threads • Diamond Segment Bit

  22. System Care • Inspect and clean the bit with a wire brush • Check for roundness, dents, etc. • Inspect mounting threads • Carbide Bit

  23. System Care Spray lubricant into the bit threads

  24. System Care Spare parts inventory furnished with system

  25. System Storage

  26. System Storage • Store system in case provided • Never store with fuel in system or case • Store in dry location not exposed to excess cold or heat

  27. Search Systems, Inc. PO Box 80307 Bakersfield, CA 93380 1-800-722-2824 1-661-588-6270 www.searchsystems.com

More Related