1 / 36

ECE 4371, Fall, 2013 Introduction to Telecommunication Engineering/Telecommunication Laboratory

ECE 4371, Fall, 2013 Introduction to Telecommunication Engineering/Telecommunication Laboratory. Zhu Han Department of Electrical and Computer Engineering Class 13 Oct. 9 th , 2013. Outline. Partial Response Carrier systems ASK, OOK, MASK FSK, MFSK BPSK, DBPSK, MPSK MQAM, MQPR OQPSK,

cody
Download Presentation

ECE 4371, Fall, 2013 Introduction to Telecommunication Engineering/Telecommunication Laboratory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 4371, Fall, 2013Introduction to Telecommunication Engineering/Telecommunication Laboratory Zhu Han Department of Electrical and Computer Engineering Class 13 Oct. 9th, 2013

  2. Outline • Partial Response • Carrier systems • ASK, OOK, MASK • FSK, MFSK • BPSK, DBPSK, MPSK • MQAM, MQPR • OQPSK, • Continuous phase modulation (CPM): MSK, GMSK

  3. Partial Response Signals • Previous classes: Sy(w)=|P(w)|^2 Sx(w) • Control signal generation methods to reduce Sx(w) • Raise Cosine function for better |P(w)|^2 • This class: improve the bandwidth efficiency • Widen the pulse, the smaller the bandwidth. • But there is ISI. For binary case with two symbols, there is only few possible interference patterns. • By adding ISI in a controlled manner, it is possible to achieve a signaling rate equal to the Nyquist rate (2W symbols/sec) in a channel of bandwidth W Hertz.

  4. Example • Duobinary Pulse • p(nTb)=1, n=0,1 • p(nTb)=1, otherwise • Interpretation of received signal • 2: 11 • -2: 00 • 0: 01 or 10 depends on the previous transmission

  5. Duobinary signaling • Duobinary signaling (class I partial response)

  6. Duobinary signal and Nyguist Criteria • Nyguist second criteria: but twice the bandwidth

  7. Differential Coding • The response of a pulse is spread over more than one signaling interval. • The response is partial in any signaling interval. • Detection : • Major drawback : error propagation. • To avoid error propagation, need deferential coding (precoding).

  8. Modified duobinary signaling • Modified duobinary signaling • In duobinary signaling, H(f) is nonzero at the origin. • We can correct this deficiency by using the class IV partial response.

  9. Modified duobinary signaling • Spectrum

  10. Modified duobinary signaling • Time Sequency: interpretation of receiving 2, 0, and -2?

  11. Pulse Generation • Generalized form of correlative-level coding (partial response signaling)

  12. Tradeoffs • Binary data transmission over a physical baseband channel can be accomplished at a rate close to the Nyquist rate, using realizable filters with gradual cutoff characteristics. • Different spectral shapes can be produced, appropriate for the application at hand. • However, these desirable characteristics are achieved at a price : • A large SNR is required to yield the same average probability of symbol error in the presence of noise.

  13. Exercise • What is the differential Duobinary output • What is the modified Duobinary output and decoded signal? Interpretation of receiving 2, 0, and -2? • What is the modified differential Duobinary output

  14. Other types of partial response signals paper

  15. ASK, OOK, MASK • The amplitude (or height) of the sine wave varies to transmit the ones and zeros • One amplitude encodes a 0 while another amplitude encodes a 1 (a form of amplitude modulation)

  16. Binary amplitude shift keying, Bandwidth • d ≥ 0  related to the condition of the line B = (1+d) x S = (1+d) x N x 1/r

  17. Implementation of binary ASK

  18. OOK and MASK • OOK (On-OFF Key) • 0 silence. • Sensor networks: battery life, simple implementation • MASK: multiple amplitude levels

  19. Pro, Con and Applications • Pro • Simple implementation • Con • Major disadvantage is that telephone lines are very susceptible to variations in transmission quality that can affect amplitude • Susceptible to sudden gain changes • Inefficient modulation technique for data • Applications • On voice-grade lines, used up to 1200 bps • Used to transmit digital data over optical fiber • Morse code • Laser transmitters

  20. Example • We have an available bandwidth of 100 kHz which spans from 200 to 300 kHz. What are the carrier frequency and the bit rate if we modulated our data by using ASK with d = 1? • Solution • The middle of the bandwidth is located at 250 kHz. This means that our carrier frequency can be at fc = 250 kHz. We can use the formula for bandwidth to find the bit rate (with d = 1 and r = 1).

  21. Frequency Shift Keying • One frequency encodes a 0 while another frequency encodes a 1 (a form of frequency modulation) • Represent each logical value with another frequency (like FM)

  22. FSK Bandwidth • Limiting factor: Physical capabilities of the carrier • Not susceptible to noise as much as ASK • Applications • On voice-grade lines, used up to 1200bps • Used for high-frequency (3 to 30 MHz) radio transmission • used at higher frequencies on LANs that use coaxial cable

  23. Example • We have an available bandwidth of 100 kHz which spans from 200 to 300 kHz. What should be the carrier frequency and the bit rate if we modulated our data by using FSK with d = 1? • Solution • This problem is similar to Example 5.3, but we are modulating by using FSK. The midpoint of the band is at 250 kHz. We choose 2Δf to be 50 kHz; this means

  24. Multiple Frequency-Shift Keying (MFSK) • More than two frequencies are used • More bandwidth efficient but more susceptible to error • f i= f c+ (2i – 1 – M)f d • f c= the carrier frequency • f d= the difference frequency • M = number of different signal elements = 2 L • L = number of bits per signal element

  25. Phase Shift Keying • One phase change encodes a 0 while another phase change encodes a 1 (a form of phase modulation)

  26. DBPSK, QPSK • Differential BPSK • 0 = same phase as last signal element • 1 = 180º shift from last signal element • Four Level: QPSK

  27. QPSK Example

  28. Bandwidth • Min. BW requirement: same as ASK! • Self clocking (most cases)

  29. Concept of a constellation diagram

  30. MPSK • Using multiple phase angles with each angle having more than one amplitude, multiple signals elements can be achieved • D = modulation rate, baud • R = data rate, bps • M = number of different signal elements = 2L • L = number of bits per signal element

  31. QAM – Quadrature Amplitude Modulation • Modulation technique used in the cable/video networking world • Instead of a single signal change representing only 1 bps – multiple bits can be represented buy a single signal change • Combination of phase shifting and amplitude shifting (8 phases, 2 amplitudes)

  32. QAM • QAM • As an example of QAM, 12 different phases are combined with two different amplitudes • Since only 4 phase angles have 2 different amplitudes, there are a total of 16 combinations • With 16 signal combinations, each baud equals 4 bits of information (2 ^ 4 = 16) • Combine ASK and PSK such that each signal corresponds to multiple bits • More phases than amplitudes • Minimum bandwidth requirement same as ASK or PSK

  33. QAM and QPR • QAM is a combination of ASK and PSK • Two different signals sent simultaneously on the same carrier frequency • M=4, 16, 32, 64, 128, 256 • Quadrature Partial Response (QPR) • 3 levels (+1, 0, -1), so 9QPR, 49QPR

  34. Offset quadrature phase-shift keying (OQPSK) • QPSK can have 180 degree jump, amplitude fluctuation • By offsetting the timing of the odd and even bits by one bit-period, or half a symbol-period, the in-phase and quadrature components will never change at the same time.

  35. Continuous phase modulation (CPM) • CPM the carrier phase is modulated in a continuous manner • constant-envelope waveform • yields excellent power efficiency • high implementation complexity required for an optimal receiver • minimum shift keying (MSK) • Similarly to OQPSK, MSK is encoded with bits alternating between quarternary components, with the Q component delayed by half a bit period. However, instead of square pulses as OQPSK uses, MSK encodes each bit as a half sinusoid. This results in a constant-modulus signal, which reduces problems caused by non-linear distortion. ECE 4371 Fall 2008

  36. Gaussian minimum shift keying • GMSK is similar to MSK except it incorporates a premodulation Gaussian LPF • Achieves smooth phase transitions between signal states which can significantly reduce bandwidth requirements • There are no well-defined phase transitions to detect for bit synchronization at the receiving end. • With smoother phase transitions, there is an increased chance in intersymbol interference which increases the complexity of the receiver. • Used extensively in 2nd generation digital cellular and cordless telephone apps. such as GSM

More Related