Health & Safety Orientation and WHMIS Overview for Chemical Engineering

1. Health & Safety Orientation and WHMIS Overview for Chemical Engineering January 12, 2006

3. Reason for the Session • Persons in authority (Employers, Professors, etc.) have a duty to inform and train those under their supervision to ensure their wellbeing (Safety & Health Legislation) • This session is the beginning to this training. It will only be on some select aspects of health and safety, for it cannot possibly cover all the specific areas that you are or will be doing in your future.

4. Some Safety Topics • Emergency response information • Occupational Health and Safety Laws • Hazard Identification • Introduction to Toxicology Terminology • Orientation to WHMIS Regulations • Engineering Safety Controls • Exposure Control Plans • Personal Protective Equipment • Emergency Response Plans • Fire Safety - Evacuation Procedures • Confined Space Entry • Respiratory Safety • Lock-out, Tag-out System • Electrical Safety • Excavations & Trenching • Scaffold Safety & Fall Protection • Ergonomics • Welding Safety • Fork Lift Safety • Transportation of Dangerous Goods • Blood Borne Pathogen Standards (First Aid).

5. Some Safety Topics • Emergency response information • Occupational Health and Safety Laws • Hazard Identification • Introduction to Toxicology Terminology • Orientation to WHMIS Regulations • Engineering Safety Controls • Exposure Control Plans • Personal Protective Equipment • Emergency Response Plans • Fire Safety - Evacuation Procedures • Confined Space Entry • Respiratory Safety • Lock-out, Tag-out System • Electrical Safety • Excavations & Trenching • Scaffold Safety & Fall Protection • Ergonomics • Welding Safety • Fork Lift Safety • Transportation of Dangerous Goods • Blood Borne Pathogen Standards (First Aid).

6. Some Safety Topics • Emergency response information • Occupational Health and Safety Laws • Hazard Identification • Introduction to Toxicology Terminology • Orientation to WHMIS Regulations • Engineering Safety Controls • Exposure Control Plans • Personal Protective Equipment • Emergency Response Plans • Fire Safety - Evacuation Procedures • Confined Space Entry • Respiratory Safety • Lock-out, Tag-out System • Electrical Safety • Excavations & Trenching • Scaffold Safety & Fall Protection • Ergonomics • Welding Safety • Fork Lift Safety • Transportation of Dangerous Goods • Blood Borne Pathogen Standards (First Aid).

7. Outline • Emergency Contact Information • Occupational Health & Safety Rights • Responsibilities of University, Supervisor & Worker • Properties of Hazardous Materials & Toxicology • WHMIS.

8. Emergency Procedures & Contact Information • Fire • Call 9 911 and Security at 5555 • Extinguishers, pull stations and ERP • Medical / First Aid: • Minor Medical => First Aid and report • Major => 9 911 Security at 5555. 1/3

9. Emergency Procedures & Contact Information • Spills => Assess and call for help if needed • Radioactive, Biological or Chemical ... = 8497 • Unsafe situations or evacuation • HSE Main Number .……….. = 8493 • Security .……………………. = 5555. 2/3

10. Emergency Procedures & Contact Information • Physical, sexual or mental harassment or discrimination: • Carole Pond (DHPS) @ 4936 • Potential violence or violent atmosphere: • Janice Lavoie (DHSE) @ 1957. 3/3

11. Health, Safety & Environment WEB LOCATION http://www.usask.ca/dhse e-mail: hse.dept@usask.ca

12. Health & Safety Rights Two Significant Health and Safety Events in Canada

13. In 1970 the Saskatchewan Occupational Health & Safety Act and Regulations were developed (updated in 93 & 96)

14. In 1984 WHMIS was introduced. Workplace Hazardous Materials Information System.

15. Occupational Health & Safety Laws Including WHMIS • Canada has legislation to protect employee’s health and safety and the environment • Federal government allocates some of this responsibility to each Province (eg WHMIS) • Provinces have their own legislation that directs the activities of people and organizations (eg safety orientation & training must be provided, SOHC, employees rights) • The regulatory bodies differ (eg WCB or DOL).

16. Employee’s Rights All employees in Saskatchewan have three basic Health and Safety Rights: • The right to know • The right to refuse • The right to participate.

17. Employee's Right to Know • To know about the presence of hazards in the workplace • To have access to information about the hazardous agents in the workplace (WHMIS) • To know what safety controls are available and how to use them; • procedural (SOP, ERP) • engineering (fume hoods etc.) • PPE.

18. Employee's Right to Refuse Section 23 of OHS Act states: A worker may refuse to perform unusually dangerous work on reasonable grounds The procedure is laid out as follows: • Supervisor • Local Safety Committee • Dept of Health, Safety and Environment • Occupational Health Committee • Department of Labour.

19. Employee's Right to Participate You have the right to participate in your health and safety program (via election).

20. Health & Safety Responsibilities

21. Responsibilities of theUniversity employee training (general) hazard assessment and audits engineering controls (fume hood maintenance etc.) training and supervision are provided general compliance requirements.

22. Responsibilities of the Supervisor or Principal Investigator • employee training (site specific) • first step in resolving concerns • safety controls provided: SOP, ERP,ECP, PPE • proper supervision • registration or permit in place • meet general compliance requirements.

23. Responsibilities of the Employee • comply with OH&S Act & Regulations • comply with University Codes & Standards • participate in training • apply knowledge & use safety equipment provided. 1/2

24. Responsibilities of the Employee • follow ECP, SOP & ERPs that are in place • work in a responsible manner • PPE is used and maintained appropriately • training and supervision are followed • notify their supervisors about unsafe acts and conditions. 2/2

25. Statutory Occupational Health Committee One with overall responsibility • Requirement of the Act & Regulations • Minutes are public and go to DOL • Review accidents, policies and procedures • Provides legislative mechanism to address unresolved OH&S concerns.

26. Local Safety Committees There are 24 committees designated as Local Safety Committees. They form an important role in workplace safety. They: • Address local safety issues • Send minutes to the statutory committee for review • Have a representative from DHSE.

27. Any Questions?

28. Properties of Hazardous Materials and Toxicology

29. MSDS Terminology • LD50 (mg/Kg): Lethal Dose

30. Let’s Look at Some Materials

31. MSDS Terminology • LD50 (mg/Kg): Lethal Dose • LC50 (ppm): Lethal Concentration • TLV-TWA : 8 hour day/40 hour week • TLV-STEL: 15 minutes • TLV-C: Never Exceeded • OT: Odour Threshold • UEL (LEL): Upper (Lower) Explosion Limit • Acute: Occurs immediately or after a single dose • Chronic: Due to long term exposure or after a long time.

32. Relative Hazard Potential One can get a relative hazard potential by using the LD50 or LC50 (acute) but you have to look at the following as well : • Chronic Toxicity - Long Term Effects • Does it target or accumulate in a system • Physical properties • Identifying how it will be used.

33. Properties that Increase Hazard • Boiling Point Low • Vapour Pressure High • Odour Threshold > TLV • Flash Point Low • Lower Explosion Limit Low • Flammability Range Large • Targets Certain Systems / Toxic • Other Properties Explosive, Carcinogenic etc.

34. WHMIS = Workplace Hazardous Material Information System

35. Salient Points to Regulations & WHMIS • Inventory Required - OHS Reg 303 • MSDSs must be available to all employees - OHS Reg 327 • All “Controlled Products” must be labeled - OHS Reg 319 • Employees must receive training • General safety orientation - OHS Reg 22 • Site specific safety orientation - OHS Reg 19 • Interpretation of hazard information - OHS Reg 318.

36. Exclusions Under WHMIS • The Food and Drug Act • The Pest Control Products Act • Hazardous Wastes • Consumer Products, Wood Products, Tobacco & Manufactured Articles • The Explosives Act • The Atomic Energy Control Act.

37. WHMIS 3 Main Points • Training: To do job safely and how WHMIS works • Labeling: Identify the hazards in the workplace • MSDS: Available for hazardous materials, know where they are and what is on them.

38. Hazard Identification System • Symbols • Supplier Labels • Workplace Labels • MSDS – Material Safety Data Sheet.

39. Symbol Class A B C D D D E F Division 1 2 3 1- 6 WHMIS Symbols, Classes and Divisions

40. WHMIS Classes A, B & C A Compressed Gas B Flammable or Combustible (Divisions 1 through 6) C Oxidizing Material

41. WHMIS Classes D1, D2 &D3 D1 Toxic D2 Long Term Toxic effect D3 Biohazard

42. WHMIS Classes E & F E Corrosive - Acid or Base F Reactive - Water or Air

43. Supplier Label • Hatched Border • Product identifier • Risk phrases • Precautionary measures • First Aid • Supplier identification • Hazard Symbols • Reference to MSDS • Bilingual. • Provided by the Supplier • 9 requirements: In all cases, the Label name and the MSDS name must be identical

44. Supplier Label TOLUENE SULFONIC ACID ABC Chemicals 123 Chemical Drive Chemical City 1-800-CHE-MICAL RISK PHRASES: Highly irritating to skin, eyes, and nose HEALTH HAZARD DATA: Strong Acid: Treat as sulphuric acid EFFECTS OF OVEREXPOSURE: ACUTE PRECAUTIONARY MEASURES: PERSONAL PROTECTIVE EQUIPMENT EYE: Face shield and goggles GLOVES: Rubber OTHER CLOTHING AND EQUIPMENT: Rubber apron, rubber boots FIRST AID: EYES: Flush with water for 15 minutes. Consult with physician SKIN: Flush with water as per sulphuric acid INGESTION: Treat as per sulphuric acid. Consult with physician Refer to Material Safety Data Sheet FRANCAIS AU VERSO

45. Workplace Label – ANY FORMAT • Provided by knowledgeable employees using the material • Allowed on any amount • 3 requirements: • Product identifier • Risk phrases • Reference to MSDS

46. Workplace Label – ANY FORMAT 1 Methyl Alcohol 2 3 Precautions: Use in well ventilated area Avoid contact with skin and eyes Keep away from spark and flame Refer to Material Safety Data Sheet

47. 9 Section Canadian MSDS Sec 1. Product Information Name, CAS Number, PIN Number, Manufacturer information Sec 2. Hazardous Ingredients Identifies hazardous ingredients by name and fraction with LD50/LC50 Sec 3. Physical Data Bp, Vp, Bp, Vd, SpGr, pH Sec 4. Fire & Explosive Data Fp, LEL, UEL, means of extinction Sec 5. Reactivity Data Stability, incompatibility, reactivity Sec 6. Toxicology Carcinogenicity, Reproductive Toxicity, Teratogenicity, Mutagenicity Sec 7. Preventative Measures Handling Procedures, Engineering Controls, PPE Sec 8. First Aid Measures What to do when…. Sec 9. Preparation Date & Signature

48. 16 Section ANSI MSDS United States (International) Sec. 1. Chemical Product & Company Information Sec. 2. Composition/Information on Ingredients Sec. 3. Hazards Identification Sec. 4. First Aid Measures Sec. 5. Fire Fighting Measures Sec. 6. Accidental Release Measures Sec. 7. Handling and Storage Sec. 8. Exposure Controls/Personal Protection Sec. 9. Physical and Chemical Properties Sec. 10. Stability and Reactivity Sec. 11. Toxicological Information Sec. 12. Ecological Information Sec. 13. Disposal Considerations Sec. 14. Transport Information Sec. 15. Regulatory Information Sec. 16. Other Information

49. Have a Safe Work Experience Any Questions ?