1 / 42

General Licensing Class

General Licensing Class. Digital Operating. Lake Area Radio Klub Spring 2012. Amateur Radio General Class Element 3 Course Presentation. ELEMENT 3 SUB-ELEMENTS (Groupings) 1 - Your Passing CSCE 2 - Your New General Bands 3 - FCC Rules 4 - Be a VE 5 - Voice Operations 6 - CW Lives

colm
Download Presentation

General Licensing Class

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. General Licensing Class Digital Operating Lake Area Radio Klub Spring 2012

  2. Amateur Radio General ClassElement 3 Course Presentation • ELEMENT 3 SUB-ELEMENTS(Groupings) • 1 - Your Passing CSCE • 2 - Your New General Bands • 3 - FCC Rules • 4 - Be a VE • 5 - Voice Operations • 6 - CW Lives • 7 - Digital Operating • 8 - In An Emergency • 9 - Skywave Excitement

  3. Amateur Radio General ClassElement 3 Course Presentation • ELEMENT 3 SUB-ELEMENTS(Groupings) • 10 - Your HF Transmitter • 11 - Your Receiver • 12 - Oscillators & Components • 13 - Electrical Principles • 14 - Circuits • 15 - Good Grounds • 16 - HF Antennas • 17 - Coax Cable • 18 - RF & Electrical Safety

  4. Digital Operating • The abbreviation "RTTY" stands for radioteletype. (G2E07) • 14.070 - 14.100 MHz is the segment of the 20 meter band that is most often used for data transmissions. (G2E04) • Baudot code is a 5-bit code, with additional start and stop bits. (G2E05) • 170 Hz is the most common frequency shift for RTTY emissions in the amateur HF bands. (G2E06) • LSB is the mode normally used when sending an RTTY signal via AFSK with an SSB transmitter. (G2E01) 14.070 MHz 14.100 MHz You can connect a PSK-31 and RTTY data reader to your radio to decode messages.

  5. Digital Operating • Below the RTTY segment, near 14.070 MHz is the segment of the 20 meter band where most PSK31 operations are commonly found. (G2E09) • The number of data bits sent in a single PSK31 character varies.(G2E02) • The number 31 in the term PSK31 represents the approximate transmitted symbol rate. (G8B10) The symbol rate is the pulse rate in pulses/second. Each symbol can represent or convey one or several of data. • When transmitting PSK31 data signals, transceiver audio input should be adjusted so that the transceiver ALC system does not activate. (G4A14) ALC is the Automatic Level Control 14.070 MHz

  6. Digital Operating • The abbreviation "MFSK" stand for Multi (or Multiple) Frequency Shift Keying. (G2E11) • A major advantage of MFSK16 compared to other digital modes is that it offers good performance in weak signal environments without error correction.(G2E10) • The relationship between transmitted symbol rate and bandwidth is that higher symbol rates require higher bandwidth.(G8B12)

  7. Digital Operating • 300 baud is the maximum symbol rate permitted for RTTY or data emission transmitted at frequencies below 28 MHz.(G1C08) • 300 baud is the maximum symbol rate permitted for RTTY or data emission transmission on the 20 meter band.(G1C07) • 1200 baud is the maximum symbol rate permitted for RTTY or data emission transmissions on the 10 meter band.(G1C10) • 19.6 kilobaud is the maximum symbol rate permitted for RTTY or data emission transmissions on the 2 meter band.(G1C11) • 56 kilobaud is the maximum symbol rate permitted for RTTY or data emission transmitted on the 1.25 meter and 70 centimeter bands.(G1C09)

  8. Digital Operating • The header is the part of a data packet that contains the routing and handling information. (G2E03) • 3585 – 3600 kHz is the segment of the 80 meter band most commonly used for data transmissions. (G2E08) • A computer and transceiver are two devices in an amateur radio station that might be connected using a USB interface. (G6C10) 3585 kHz 3600 kHz The universal serial bus (USB) has made it simple to connect your ham radio to your computer.

  9. Digital Operating • A DE-9 connector would be a good choice for a serial data port. (G6C12) Usually called a DB-9, but DE-9 is the original name. (and for the exam) • An RCA Phono connector is commonly used for audio signals in Amateur Radio stations. (G6C14) RCA Connectors

  10. Digital Operating • The general description of a DIN type connector is a family of multiple circuit connectors suitable for audio and control signals. (G6C17) DIN Connectors

  11. Digital Operating • It is important to know the duty cycle of the data mode you are using when transmitting because some modes have high duty cycles which could exceed the transmitter's average power rating. (G8B08) • In the PACTOR protocol, an NAK response to a transmitted packet means the receiver is requesting the packet be re-transmitted. (G2E13) • By transmitting redundant information with the data, forward error correction allows the receiver to correct errors in received data packets. (G8B11) Forward error correction, FEC, is achieved by sending each character twice. Allowing the receiver to correct errors by double-checking the received data. • When the receiving station responds to an ARQ data mode packet containing errors, it requests the packet be retransmitted. (G2E12) ARQ, Automatic Repeat Request. Request to re-transmit the packet. Receiving station will quickly transmit ACK for perfect copy.

  12. Digital Operating • An advantage of a transceiver controlled by a direct digital synthesizer (DDS) is that it provides variable frequency with the stability of a crystal oscillator. (G7C05) Digital circuits called a synthesizer control the receive and transmit frequencies. • The term "software defined radio" (SDR) means a radio in which most major signal processing functions are performed by software. (G7C11)

  13. Element 3 General Class Question Pool Digital Operating Valid July 1, 2011 Through June 30, 2015

  14. G2E07What does the abbreviation "RTTY"stand for? Returning To You Radio-Teletype A general call to all digital stations Repeater Transmission Type

  15. G2E04 Which of the following 20 meter band segments is most often used for most data transmissions? 14.000 - 14.050 MHz 14.070 - 14.100 MHz 14.150 - 14.225 MHz 14.275 - 14.350 MHz

  16. G2E05 Which of the following describes Baudot Code? 7-bit code, with start, stop and parity bits. A code using error detection and correction. 5-bit code, with additional start and stop bits. A code using SELCAL and LISTEN.

  17. G2E06What is the most common frequency shift for RTTY emissions in the amateur HF bands? 85 Hz 170 Hz 425 Hz 850 Hz

  18. G2E01 Which mode is normally used when sending an RTTY signal via AFSK with an SSB transmitter? USB DSB CW LSB

  19. G2E09 In what segment of the 20 meter band are most PSK31 operations commonly found? At the bottom of the slow-scan segment, near 14.230 MHz. At the top of the SSB phone segment, near 14.325 MHz. In the middle of the CW segment, near 14.100 MHz Below the RTTY segment, near 14.070 MHz.

  20. G2E02How many data bits are sent in a single PSK31 character? The number varies 5 7 8

  21. G8B10 What does the number 31 represent in PSK31? • The approximate transmitted symbol rate. • The version of PSK protocol. • The year in which PSK31 was invented. • The number of characters that can be represented by PSK31.

  22. G4A14How should the transceiver audio input be adjusted when transmitting PSK31 data signals? • So that the transceiver is at maximum rated output power. • So that the transceiver ALC system does not activate. • So that the transceiver operates at no more than 25% of rated power. • So that the transceiver ALC indicator shows half scale.

  23. G2E11 What does the abbreviation"MFSK" stand for? Manual Frequency Shift Keying Multi (or Multiple) Frequency Shift Keying Manual Frequency Sideband Keying Multi (or Multiple) Frequency Sideband Keying

  24. G2E10What is a major advantage of MFSK16 compared to other digital modes? It is much higher speed than RTTY It is much narrower bandwidth than most digital modes It has built-in error correction It offers good performance in weak signal environment without error correction

  25. G8B12What is the relationship between transmitted symbol rate and bandwidth? Symbol rate and bandwidth are not related. Higher symbol rates require higher bandwidth. Lower symbol rates require higher bandwidth. Bandwidth is constant for data mode signals.

  26. G1C08 What is the maximum symbol rate permitted for RTTY or data emission transmitted at frequencies below 28 MHz? 56 kilobaud 19.6 kilobaud 1200 baud 300 baud 26

  27. G1C07 What is the maximum symbol rate permitted for RTTY data emission transmission on the 20 meter band? 56 kilobaud. 19.6 kilobaud 1200 baud. 300 baud. 27

  28. G1C10 What is the maximum symbol rate permitted for RTTY or data emission transmissions on the 10 meter band? 56 kilobaud 19.6 kilobaud 1200 baud 300 baud 28

  29. G1C11 What is the maximum symbol rate permitted for RTTY or data emission transmissions on the 2 meter bands? 56 kilobaud 19.6 kilobaud 1200 baud 300 baud 29

  30. G1C09 What is the maximum symbol rate permitted for RTTY or data emission transmitted on the 1.25 meter and 70 centimeter bands? 56 kilobaud 19.6 kilobaud 1200 baud 300 baud 30

  31. G2E03 What part of a data packet contains the routing and handling information? Directory Preamble Header Footer

  32. G2E08 What segment of the 80 meter band is most commonly used for data transmissions? 3570 – 3600 kHz 3500 – 3525 kHz 3700 – 3750 kHz 3775 – 3825 kHz

  33. G6C10 What two devices in an amateur radio station might be connected using a USB interface? Computer and transceiver Microphone and transceiver Amplifier and antenna Power supply and amplifier

  34. G6C12 Which of the following connectors would be a good choice for a serial data port? PL-259 Type N Type SMA DE-9

  35. G6C14 Which of these connector types is commonly used for audio signals in Amateur Radio stations? PL-259 BNC RCA Phono Type N

  36. G6C17 What is the general description of a DIN type connector? A special connector for microwave interfacing. A DC power connector rated for currents between 30 and 50 amperes. A family of multiple circuit connectors suitable for audio and control signals. A special watertight connector for use in marine applications.

  37. G8B08 Why is it important to know the duty cycle of the mode you are using when transmitting? To aid in tuning your transmitter Some modes have high duty cycles which could exceed the transmitter’s average power rating. To allow time for the other station to break in during a transmission All of these choices are correct

  38. G2E13 In the PACTOR protocol, what is meant by an NAK response to a transmitted packet? The receiver is requesting the packet be re-transmitted. The receiver is reporting the packet was received without error. The receiver is busy decoding the packet. The entire file has been received correctly.

  39. G8B11How does forward error correction allow the receiver to correct errors received in data packets? By controlling transmitter output power for optimum signal strength. By using the varicode character set. By transmitting redundant information with the data. By using a parity bit with each character.

  40. G2E12How does the receiving station respond to an ARQ data mode packet containing errors? Terminates the contact. Requests the packet be retransmitted. Sends the packet back to the transmitting station. Requests a change in transmitting protocol.

  41. G7C05 Which of the following is an advantage of a transceiver controlled by a direct digital synthesizer (DDS)? Wide tuning range and no need for band switching. Relatively high power output. Relatively low power consumption. Variable frequency with the stability of a crystal oscillator.

  42. G7C11 What is meant by the term “software defined radio” (SDR)? A radio in which most major signal processing functions are performed by software. A radio which provides computer interface for automatic logging of band and frequency. A radio which uses crystal filters designed using software. A computer model which can simulate performance of a radio to aid in the design process.

More Related