1 / 9

ILD Magnet & calorimeters integration meeting Questions to be addressed

ILD Magnet & calorimeters integration meeting Questions to be addressed. 01-02 /02/2012 @LLR-LAL. 1St session : Experimental Hall & Japanese site. Experimental Hall design status New considerations induced by Japanese site specifications :

connley-bogue
Download Presentation

ILD Magnet & calorimeters integration meeting Questions to be addressed

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ILD Magnet & calorimeters integration meetingQuestions to be addressed 01-02 /02/2012 @LLR-LAL

  2. 1St session : Experimental Hall & Japanese site • Experimental Hall design status • New considerations induced by Japanese site specifications : • Incidence on the design of the hall, on the assembly of the detector, on its design. • Influence of seismic considerations : predominant effects of vibrations over mechanical deformations.

  3. 2nd session : Coil and Magnet System • Vacuum tank : • Thickness of the vacuum tank skin ( 60 mm continuously?) • Fixation to return yoke (suspension and tie rods) • Hcal rail support : welded on vacuum tank? • FEA calculations • Construction

  4. 2nd session : Coil and Magnet System • Vacuum tank : • Thickness of the vacuum tank skin ( 60 mm continuously?) • Fixation to return yoke (suspension and tie rods) • Hcal rail support : welded on vacuum tank? • FEA calculations • Construction • Coil : • conductor, winding, • Internal instrumentation • Return Yoke design( shape, thickness, Muons chambers…) • Update of stray field calculations ( FSP aera, no compensating coil)

  5. 3rd session : Calorimeters assembly and integration studies g • FEA : • Self load and in load deformations. • Definition of attachment points in the coil (azimuth and sizing) • TPC support emax = 1.69 mm

  6. 3rd session : Calorimeters assembly and integration studies • FEA : • Self load and in load deformation. • Definition of attachment points in the coil (azimuth and sizing) • SDHcal = room for these rails. ( also place for services)

  7. 3rd session : Calorimeters assembly and integration studies • FEA : • Self load and in load deformation. • Definition of attachment points in the coil (azimuth and sizing) • TPC support : • Azimuth, • fixation to Ecal/Hcal/Vaccum tank ? • Needed space ( on the face of TPC and on the other fixation point) • if time : • Not to forgot that 700 cables coming from the inners : way out in each case ( AHCAL/DHCAL/TPC endplate), connecting boxes

  8. 4th session : endcaps studies Segmentation of the Ecalendcap Tilt of the Ahcal ( 22.5 °) (because of self load deformation)

  9. 5th session : Hadronic calorimeters , design report Update of the design of the Calos Tooling SDHcal : dimensioning of the gap Calo/coil ( overlap of service, rails…)

More Related