1 / 21

Highway Accident Avoidance and Identification System(HAAIS) Prototype Presentation

Highway Accident Avoidance and Identification System(HAAIS) Prototype Presentation. Introduction……. System Diagram. Current Progress……. Vehicle Device. Small and user-friendly device. Rechargeable power source . Ability to interact with a bar code reader. Integrated with Xbee RF modules.

corina
Download Presentation

Highway Accident Avoidance and Identification System(HAAIS) Prototype Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Highway Accident Avoidance and Identification System(HAAIS) Prototype Presentation

  2. Introduction……

  3. SystemDiagram

  4. Current Progress…….

  5. Vehicle Device • Small and user-friendly device. • Rechargeable power source . • Ability to interact with a bar code reader. • Integrated with Xbee RF modules. • 70% completed

  6. Vehicle Device • Circuit Design Done • Circuit Implementation 80 % Done • Microcontroller Programming code 70 %Done • Xbee Programing Code Done • Vehicle Device Structural ImplementationRemaining • Testing Remaining • Integration Remaining

  7. Vehicle Device Circuit

  8. Road Device • Circuit Design Done • Circuit Implementation Done • Microcontroller Programming code 60 %Done • Xbee Programing Code Done • Road Device Structural Implementation Remaining • Testing Remaining • Integration Remaining

  9. Road Device Circuit

  10. Xbee Programming code for VD & RD RF Modules +++ Enter configuration mode (Default) atdlFFFF Set/Read the lower 16 bits of the 32-bit destination address. atmy0010 Set/Read the lower 16 bits of the 32-bit destination address. atir02 Set/Read sample rate. atwrWrite parameter values to nonvolatile memory so that parameter modifications persist through subsequent power-up or reset.

  11. Vehicle ID Structure V 10 224 V A---Z =22 22 + 10 = 32 256-32=224 Calculating Error check byte 0x56 0x0A 0xE0 Error Check byte VD Xbee Module Source address Message type

  12. Road Device SMS Message Structure R A---Z =18 18 + 25 = 43 43 + 10=53 256-53=203 Calculating Error check byte R 25 10 203 0xCB 0x01 0x19 0x0A Error Check byte VD Xbee Module Source address Road Device Number Message type

  13. Software User Interfaces • Entrance System 90% Done • Exit System 80% Done • Emergency Notify System 10% Done • Testing • Unit Testing 50% Done • Integration Testing Remaining

  14. Software User Interfaces

  15. Server System…… • Server Architecture Done • Server Software • Designing Done • Implementing Done • Developing 90% • Database • Query Implementation and Developing Done • Ozeki SMS Gateway 60% • Testing Remaining • Integration Remaining

  16. Thank You!!!!!

More Related