DISTRIBUTED FILE SYSTEMS

1. DISTRIBUTED FILE SYSTEMS DEFINITIONS: • A Distributed File System ( DFS ) is simply a classical model of a file system distributed across multiple machines. The purpose is to promote sharing of dispersed files. • This is an area of active research interest today. • The resources on a particular machine are local to itself. Resources on other machines are remote. • A file system provides a service for clients. The server interface is the normal set of file operations: create, read, etc. on files.

2. Introduction • Distributed file systems support the sharing of information in the form of files throughout the intranet. • A distributed file system enables programs to store and access remote files exactly as they do on local ones, allowing users to access files from any computer on the intranet. • Recent advances in higher bandwidth connectivity of switched local networks and disk organization have lead high performance and highly scalable file systems.

3. Definitions DISTRIBUTED FILE SYSTEMS  Clients, servers, and storage are dispersed across machines. Configuration and implementation may vary - • Servers may run on dedicated machines, OR • Servers and clients can be on the same machines. • The OS itself can be distributed with the file system a part of that distribution. • A distribution layer can be interposed between a conventional OS and the file system. Clients should view a DFS the same way they would a centralized FS; the distribution is hidden at a lower level. Performance is concerned with throughput and response time.

4. Naming and Transparency DISTRIBUTED FILE SYSTEMS Naming is the mapping between logical and physical objects. • Example: A user filename maps to <cylinder, sector>. • In a conventional file system, it's understood where the file actually resides; the system and disk are known. • In a transparent DFS, the location of a file, somewhere in the network, is hidden. • File replication means multiple copies of a file; mapping returns a SET of locations for the replicas. Location transparency - • The name of a file does not reveal any hint of the file's physical storage location. • File name still denotes a specific, although hidden, set of physical disk blocks.

5. Naming and Transparency DISTRIBUTED FILE SYSTEMS The ANDREW DFS AS AN EXAMPLE: • Is location independent. • Supports file mobility. • Separation of FS and OS allows for disk-less systems. These have lower cost and convenient system upgrades. The performance is not as good. NAMING SCHEMES: There are three main approaches to naming files: 1. Files are named with a combination of host and local name. • This guarantees a unique name. NEITHER location transparent NOR location independent. • Same naming works on local and remote files. The DFS is a loose collection of independent file systems.

6. Naming and Transparency DISTRIBUTED FILE SYSTEMS NAMING SCHEMES: 2. Remote directories are mounted to local directories. • So a local system seems to have a coherent directory structure. • The remote directories must be explicitly mounted. The files are location independent. • SUN NFS is a good example of this technique. 3. A single global name structure spans all the files in the system. • The DFS is built the same way as a local filesystem. Location independent.

7. Naming and Transparency DISTRIBUTED FILE SYSTEMS IMPLEMENTATION TECHNIQUES: • A non-transparent mapping technique: name ----> < system, disk, cylinder, sector > • A transparent mapping technique: name ----> file_identifier ----> < system, disk, cylinder, sector > • So when changing the physical location of a file, only the file identifier need be modified. This identifier must be "unique”.

8. Remote File Access DISTRIBUTED FILE SYSTEMS CACHING • Reduce network traffic by retaining recently accessed disk blocks in a cache, so that repeated accesses to the same information can be handled locally. • If required data is not already cached, a copy of data is brought from the server to the user. • Perform accesses on the cached copy. • Files are identified with one master copy residing at the server machine, • Copies of (parts of) the file are scattered in different caches. • Cache Consistency Problem -- Keeping the cached copies consistent with the master file. • A remote service ((RPC) has these characteristic steps: • The client makes a request for file access. • The request is passed to the server in message format. • The server makes the file access. • Return messages bring the result back to the client. • This is equivalent to performing a disk access for each request.

9. Remote File Access DISTRIBUTED FILE SYSTEMS CACHE LOCATION: • Caching is a mechanism for maintaining disk data on the local machine. This data can be kept in the local memory or in the local disk. Caching can be advantageous both for read ahead and read again. • The cost of getting data from a cache is a few HUNDRED instructions; disk accesses cost THOUSANDS of instructions. • The master copy of a file doesn't move, but caches contain replicas of portions of the file. • Caching behaves just like "networked virtual memory". • What should be cached? << blocks <---> files >>. Bigger sizes give a better hit rate; smaller give better transfer times. • Caching on disk gives: • Better reliability. • Caching in memory gives: • The possibility of diskless work stations, • Greater speed,

10. Remote File Access DISTRIBUTED FILE SYSTEMS COMPARISON OF CACHING AND REMOTE SERVICE: • Many remote accesses can be handled by a local cache. There's a great deal of locality of reference in file accesses. Servers can be accessed only occasionally rather than for each access. • Caching causes data to be moved in a few big chunks rather than in many smaller pieces; this leads to considerable efficiency for the network. • Disk accesses can be better optimized on the server if it's understood that requests are always for large contiguous chunks. • Caching works best on machines with considerable local store - either local disks or large memories.

11. Remote File Access DISTRIBUTED FILE SYSTEMS STATEFUL VS. STATELESS SERVICE: Stateful: A server keeps track of information about client requests. • It maintains what files are opened by a client; connection identifiers; server caches. • Memory must be reclaimed when client closes file or when client dies. Stateless: Each client request provides complete information needed by the server (i.e., filename, file offset ). • The server can maintain information on behalf of the client, but it's not required.

12. Remote File Access DISTRIBUTED FILE SYSTEMS STATEFUL VS. STATELESS SERVICE: Performance is better for stateful. • Don't need to parse the filename each time, or "open/close" file on every request. Fault Tolerance: A stateful server loses everything when it crashes. • Server must poll clients in order to renew its state. • Client crashes force the server to clean up its encached information. • Stateless remembers nothing so it can start easily after a crash.

13. Remote File Access DISTRIBUTED FILE SYSTEMS FILE REPLICATION: • Duplicating files on multiple machines improves availability and performance. • Placed on failure-independent machines ( they won't fail together ). • The main problem is consistency - when one copy changes, how do other copies reflect that change? Often there is a tradeoff: consistency versus availability and performance.

14. General File Service Architecture • The responsibilities of a DFS are typically distributed among three modules: • Client module which emulates the conventional file system interface • Server modules(2) which perform operations for clients on directories and on files. • Most importantly this architecture enables stateless implementation of the server modules.

15. Client computer Server computer Directory service Application Application program program Flat file service Client module File service architecture

16. File Service Architecture • Flat File Service: • Concerned with implementing operations on the concepts of files. • Unique File Identifiers (UFIDs) are used to refer to files in all requests for flat file service operations. • Responsibilities of file and directory service is based upon UFID (long sequence of bits so each file has UFID which is unique in DS).

17. File Service Architecture • Directory Service: • It provides a mapping between text names for files and their UFIDs • Client Obtain UFID by quoting text name to the directory service. • Client Module: • Run on each client computer • Integrate and expand the operations of the flat file service under single application programming interface.

18. What is NFS? • First commercially successful network file system: • Developed by Sun Microsystems for their diskless workstations • Designed for robustness and “adequate performance” • Sun published all protocol specifications • Many many implementations

19. SUN Network File System DISTRIBUTED FILE SYSTEMS OVERVIEW: • Runs on SUNOS - NFS is both an implementation and a specification of how to access remote files. It's both a definition and a specific instance. • The goal: to share a file system in a transparent way. • Uses client-server model ( for NFS, a node can be both simultaneously.) Can act between any two nodes ( no dedicated server. ) • Mount makes a server file-system visible from a client.

20. highlights • NFS is stateless • All client requests must be self-contained • The virtual filesystem interface • VFS operations • VNODE operations • Performance issues • Impact of tuning on NFS performance

21. Objectives (I) • Machine and Operating System Independence • Could be implemented on low-end machines of the mid-80’s • Fast Crash Recovery • Major reason behind stateless design • Transparent Access • Remote files should be accessed in exactly the same way as local files

22. Objectives (II) • UNIX semantics should be maintained on client • Best way to achieve transparent access • “Reasonable” performance • Robustness and preservation of UNIX semantics were much more important

23. Basic design • Three important parts • The protocol • The server side • The client side

24. The protocol (I) • Uses the Sun RPC mechanism and Sun eXternal Data Representation (XDR) standard • Defined as a set of remote procedures • Protocol is stateless • Each procedure call containsall the information necessary to complete the call

25. Advantages of statelessness • Crash recovery is very easy: • When a server crashes, client just resends request until it gets an answer from the rebooted server • Client cannot tell difference between a server that has crashed and recovered and a slow server • Client can always repeat any request

26. Consequences of statelessness • Read and writes must specify their start offset • Server does not keep track of current position in the file • User still use conventional UNIX reads and writes • Open system call translates into severallookup calls to server

27. Server side (II) • File handleconsists of • Filesystem id identifying disk partition • I-node number identifying file within partition • Generation number changed every timei-node is reused to store a new file • Server will store • Filesystem id in filesystem superblock • I-nodegeneration number in i-node

28. Client side (I) • Provides transparent interface to NFS • Mapping between remote file names and remote file addresses is done a server boot time through remote mount • Extension of UNIX mounts • Specified in a mount table • Makes a remote subtree appear part of a local subtree

29. Remote mount Client tree / Server subtree usr rmount bin After rmount, root of server subtree can be accessed as /usr

30. Read File Network Data Client Server mount kubi:/jane mount coeus:/sue mount kubi:/prog • Distributed File System: • Transparent access to files stored on a remote disk • Naming choices (always an issue): • Hostname:localname: Name files explicitly • No location or migration transparency • Mounting of remote file systems • System manager mounts remote file systemby giving name and local mount point • Transparent to user: all reads and writes look like local reads and writes to usere.g. /users/sue/foo/sue/foo on server • A single, global name space: every file in the world has unique name • Location Transparency: servers can change and files can move without involving user

31. Client side (II) • Provides transparent access to • NFS • New virtual filesystem interface supports • VFS calls, which operate on whole file system • VNODE calls, which operate on individual files • Treats all files in the same fashion

32. Client side (III) User interface is unchanged UNIX system calls VNODE/VFS Common interface Other FS NFS UNIX FS disk RPC/XDR LAN

33. The Mount Protocol • The mount protocol provides four basic services that clients need before they can use NFS: • It allows the client to obtain a list of the directory hierarchies (i.e. the file systems) that the client can access through NFS. • It accepts full path names That allow the client to identify a particular directory hierarchy. • It authenticates each client’s request and validates the client’s permission to access the requested hierarchy. • It returns a file handle for the root directory of the hierarchy a client specifies. • The client uses the root handle obtained from the mount protocol when making NFS calls.

34. SUN Network File System DISTRIBUTED FILE SYSTEMS NFS ARCHITECTURE: Follow local and remote access through this figure:

35. Virtual File System (VFS) • VFS: Virtual abstraction similar to local file system • Instead of “inodes” has “vnodes” • Compatible with a variety of local and remote file systems • provides object-oriented way of implementing file systems • VFS allows the same system call interface (the API) to be used for different types of file systems • The API is to the VFS interface, rather than any specific type of file system

36. SUN Network File System DISTRIBUTED FILE SYSTEMS NFS ARCHITECTURE: 1. UNIX filesystem layer - does normal open / read / etc. commands. 2. Virtual file system ( VFS ) layer - • Gives clean layer between user and filesystem. • Acts as deflection point by using global vnodes. • Understands the difference between local and remote names. • Keeps in memory information about what should be deflected (mounted directories) and how to get to these remote directories.  3. System call interface layer - • Presents sanitized validated requests in a uniform way to the VFS.

37. SUN Network File System DISTRIBUTED FILE SYSTEMS CACHES OF REMOTE DATA: • The client keeps: File block cache - ( the contents of a file ) File attribute cache - ( file header info (inode in UNIX) ). • The local kernel hangs on to the data after getting it the first time. • On an open, local kernel, it checks with server that cached data is still OK. • Cached attributes are thrown away after a few seconds.

38. NFS solution (I) • Stateless server does not know how many users are accessing a given file • Clients do not know either • Clients must • Frequently send their modified blocks to the server • Frequently ask the server to revalidate the blocks they have in their cache

39. NFS Pros and Cons • NFS Pros: • Simple, Highly portable • NFS Cons: • Sometimes inconsistent! • Doesn’t scale to large # clients • Must keep checking to see if caches out of date • Server becomes bottleneck due to polling traffic

40. AFS: Andrew File System The Andrew File System (AFS) is a location-independent file system. AFS makes it easy for people to work together on the same files, no matter where the files are located. AFS users do not have to know which machine is storing a file. AFS is a distributed file systemwhich make it as easy to access files stored on a remote computer as files stored on the local disk.

41. Andrew File System • Andrew File System (AFS, late 80’s)  DCE DFS (commercial product) • Callbacks: Server records who has copy of file • On changes, server immediately tells all with old copy • No polling bandwidth (continuous checking) needed • Write through on close • Changes not propagated to server until close() • Session semantics: updates visible to other clients only after the file is closed • As a result, do not get partial writes: all or nothing! • Although, for processes on local machine, updates visible immediately to other programs who have file open • In AFS, everyone who has file open sees old version • Don’t get newer versions until reopen file

42. Andrew File System (con’t) • Data cached on local disk of client as well as memory • On open with a cache miss (file not on local disk): • Get file from server, set up callback with server • On write followed by close: • Send copy to server; tells all clients with copies to fetch new version from server on next open (using callbacks) • What if server crashes? Lose all callback state! • Reconstruct callback information from client: go ask everyone “who has which files cached?” • AFS Pro: Relative to NFS, less server load: • Disk as cache  more files can be cached locally • Callbacks  server not involved if file is read-only • For both AFS and NFS: central server is bottleneck! • Availability: Server is single point of failure • Cost: server machine’s high cost relative to workstation

43. Conclusion • To allow many clients to access a server and to keep the servers isolated from client crashes, NFS uses stateless servers. • NFS adopted the open-read-write-close paradigm used in UNIX, along with basic file types and file protection modes.