1 / 14

IPCC Guidelines for Industrial Processes & Product Use (IPPU) - Sector Highlights and Structure

Dr. Jochen Harnisch from Ecofys GmbH provides an overview of the structure and new gases covered in the IPCC's IPPU volume. Highlights from each chapter are discussed, along with questions and conclusions. The presentation emphasizes the inclusion of new sources and gases, as well as the improved user-friendliness of the guidelines.

crowm
Download Presentation

IPCC Guidelines for Industrial Processes & Product Use (IPPU) - Sector Highlights and Structure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2006 IPCC Guidelines: The New Sector “Industrial Processes & Product Use (IPPU)” Bonn, 18 May 2006 Maritim Hotel Side-Event at SB24 on “2006 Guidelines” Dr. Jochen Harnisch, Ecofys GmbH Coordinating Lead Author

  2. Outline • Structure and new gases • Highlights from the chapters • Questions • Conclusions

  3. IPPU Volume Structure • Chapter 1 Introduction • Chapter 2 Mineral Industry Emissions • Chapter 3 Chemical Industry Emissions • Chapter 4 Metal Industry Emissions • Chapter 5 Non-Energy Products from Fuels & Solvent Use • Chapter 6 Electronics Industry Emissions • Chapter 7 Emissions of Fluorinated Substitutes for ODS • Chapter 8 Other Product Manufacture and Use • Annex 1 Worksheets • Annex 2 Potential Emissions • Annex 3 Improvements since 1996 • Annex 4 Glossary for IPPU Sector

  4. List of Gases Covered by IPPU • Carbon Dioxide • Methane • Nitrous Oxide • Sulphur Hexafluoride • Hydrofluorocarbons (TAR, non-TAR) • Perfluorocarbons (TAR, non-TAR) • Nitrogen Trifluoride (TAR) • Trifluoromethyl Sulfur Pentafluoride (TAR) • Halogenated Ethers (TAR, non-TAR) • Other Halocarbons (TAR, non-TAR)

  5. Chapter 2: Mineral Industry • Consistent approach based on carbonate content of inputs for all source • Guidance to report emissions from carbonates where they occur • Inclusion of new guidance for other carbonates • Guidance on clays in ceramics industry

  6. Chapter 3: Chemical Industry • New sources: - N2O emissions from production of caprolactam, glyoxal, and glyoxylic acid - CO2 emission from production of titanium dioxide - Separation of CO2 from urea use and production - CO2 from various petrochemical processes - Expanded method for HFC-23 and consideration of other fluorinated by-products

  7. Chapter 4: Metal Industry • Added guidance on emissions from zinc and lead production • Greatly improved guidance on production of ferroalloys • Detailed treatment of different production routes for iron and steel including DRI and metallurgical coke (Emissions from metallurgical coke should be reported under Energy Sector.)

  8. Chapter 5: Non-Energy Products from Fuels and Solvent Use • Inclusion previously separate chapter on solvent use • Consideration of use of fuels as lubricants, paraffin waxes, bitumen/asphalt and solvents • Focusses on direct CO2 emissions

  9. Chapter 6: Electronics Industry • Added guidance on production of PV cells, LCD and heat transfer fluids • Inclusion of new gases applied in the industry • Update of emission factors – including treatment of abatement • Inclusion of a new tier 1 method providing emission factors & activity data

  10. Chapter 7: Fluorinated Substitutes for ODS • Tier 1 approach on “actual emissions” (“potential emissions” approach is no longer considered appropriate [see Annex 2])” • Reference to regional/global data bases for activity data • Preparation of use of EFDB as depository also for activity data

  11. Chapter 8: Other Product Manufacture and Use SF6 from electrical equipment: - Replacement of three parallel Tier 3 mass balance methods by one flexible method • New tier 1 emission factors for regions and technologies Addition of other sources: e.g. nuclear fuel cycle and military applications

  12. Questions and Answers • Imposing undue effort on countries in requesting reporting of new sources and new gases? • 2006 IPCC Guidelines provide methods for estimation of GHG emissions for as wide a range of gases and sources based on up-to-date knowledge available. COP to decide on reporting. • New boundary problems between Energy and IPPU? • Potentially yes, but discretion for countries remains and no other way to integrate bottom-up data e.g. from emission trading schemes & corporate reporting • Too many industry experts with vested interests involved e.g. in CDM projects or emissions trading?  IPCC procedures including review & strong co-chairs/SG/CLAs provided a counter-balance

  13. Conclusions • Dynamic sector with rapid technological change • Strong participation from industry: good access to sector knowledge but safeguards against lobbying required • Policies and voluntary actions already show an impact on emissions from several sources • Rapid expansion of knowledge about sources and gases since 1996/2000, including emission trading schemes and voluntary reporting • Wealth of information on new sources of immeadiate benefit to inventory compilers • Greatly improved user-friendliness – many simplifictations including new tier 1 methods

  14. Thank you for your attention! Dr. Jochen Harnisch Ecofys Germany J.Harnisch@ecofys.de phone: +49 911-994358-12 fax: +49 911-994358-11

More Related