1 / 20

Unit: Surveying Lesson: Measuring Distance

Learn about the different methods of measuring distance in surveying, from ancient techniques like pacing and chaining to modern tools like electronic distance measurement (EDM). Understand how to measure distance over level and sloping ground, and explore the historical significance of units like fathoms, rods, and chains. Take a quiz to test your knowledge!

cupp
Download Presentation

Unit: Surveying Lesson: Measuring Distance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unit: SurveyingLesson: Measuring Distance Ag Structures Mr. Dieckhoff PowerPoint adopted from California State Ag Mechanics Curriculum

  2. Distance Measurement Introduction • Distance is one of the most basic engineering measurements • Early measurements were made in terms of the dimensions of the body Cubits - the distance between the tip of your middle finger to the elbowTypically to measure cords and textiles(another measure was 24 digits or 6 palms)

  3. Distance Measurement Introduction Fathom - distance between the tips of your middle finger when your arms are outstretched The name comes from the Danish faedn, "outstretched arms."

  4. Distance Measurement Introduction Foot distance from the tip of a man’s big toe to the heel Rod - the sum of the lengths of the left feet of 16 men (16.5 ft)

  5. Distance Measurement Pacing • The ability to pace distance is very useful • A person can determine their pace by counting the number of paces necessary to walk a distance that has been previously measured • A pace is defined as one step • A stride is consider two steps

  6. Calculating Pace Lab

  7. Distance Measurement Pacing

  8. Distance Measurement Measuring Wheels

  9. Distance Measurement Taping or Chaining • For centuries engineers have measured distances with ropes, lines, or cords • The term chaining is a carry–over from the time when the Gunter chain was used (1600’s) • The 66 foot chain is made of ____ links 7.92 inches in length • In 1785 U.S. a federal law stated that all government surveys must be done with a Gunter's chain

  10. Distance Measurement Taping or Chaining • It lies at the origin of the definition of an acre (43,560 sq feet). • The original acre was an area of land suitable for ploughing with a defined amount of work (e.g., ten furrows long, each furrow being ten chains, permitting rests of an oxen team) • It measured one chain by one furlong (totaling 10 square chains). • Early two–lane roads were laid out with a chain, resulting in a 66–ft right–of–way

  11. Distance Measurement Taping or Chaining

  12. Distance Measurement Taping or Chaining • Tapes are available in lengths up to 1,000 feet; precision of 1/1,000 to 1/5,000 are commonly obtained

  13. Distance Measurement Electronic Distance Measurement (EDM) • EDMs are very useful in measuring distances that are difficult to access or long distances

  14. Distance Measurement Taping over Level Ground • If the taping is done over level ground where there is no underbrush, the tape can rest on the ground • A taping crew consists of two people: the head tapeperson and the rear tapeperson • The head tapeperson takes one end of the tape walks down the line towards the point • If the distance is more than 100–ft, then the head tapeperson places a taping pin at the 100–ft interval and the process is repeated

  15. Distance Measurement Taping over Sloping Ground • If the taping is done over sloping ground where there is no underbrush, the taping must be done in sections, referred to as breaking the tape

  16. Distance Measurement Taping over Sloping Ground • Holding the tape more than five feet above the ground is difficult, therefore slopes greater than 5 ft per 100 ft will require runs of less than 100 ft

  17. Use a plumb bob to locate the point Height less than 5 feet 40 feet 30 feet 35 feet Distance Measurement Taping over Sloping Ground Hold the tape level

  18. Distance Measurements Review What is a fathom? How long is a rod? What is the difference between a pace and a stride? What is the length of a chain? How big is an acre? How did furlongs help determine the length of an acre? How do you measure distance over sloping land?

  19. Lesson 1 Quiz • You are working on a surveying crew. The land description you are working on says the western edge of the property is 14 rods. How many feet is that? • What is your personal length of stride? (answer should have 1 decimal place) • How many square feet are in an acre? • What is the relationship between chains & furlongs? • Explain how to take distance measurements over uneven ground?

  20. Lesson 1 Answers • 231 feet • Answers will vary • 43,560 square feet • A furlong is 1 chain wide, by 10 chains long • Use a plumb-bob over distances where the terrain has a greater slope than 5%.

More Related