1 / 17

Unsolved Problems

Unsolved Problems. Generator lines Straightness. section line of section plane. Generator Line. Staightness. ISO 2692 CZ common zone SZ separate zones. Acc. To Principle of independency. CZ superfluous. CZ superfluous. CZ ?. b). sz. sz. When a group of toleranced features

dale
Download Presentation

Unsolved Problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unsolved Problems

  2. Generator lines Straightness

  3. section line of section plane Generator Line Staightness

  4. ISO 2692 CZ common zone SZ separate zones

  5. Acc. To Principle of independency

  6. CZ superfluous

  7. CZ superfluous

  8. CZ ?

  9. b) sz

  10. sz When a group of toleranced features is related to a datum or datum system containing a modifier M or L it is questionable whether CZ common zone (e.g. simultaneous gauging) or SZ separate zones (e.g. separate gauging) applies. Therefore in the future CZ or SZ shall always be indicated in these cases, see examples …

  11. Alternative rule for ISO 2692: CZ applies (without indication of CZ) when positional tolerances are applied together with the maximum material requirement or the least material requirement, unless otherwise specified, e.g. by the symbol SZ. Advantages: Coincides with most functions Coincides with former practice Coinsides with ASME 14.5 Disadvantages: Violating the (fundamental) rule of Prindiple of independency Whatever the rule is, there is a need for an additional symbol SZ (= separate zones)

  12. ISO 1660 Limitation of Steps

  13. Profile tol. 0,003 / 3 • in order to avoid • steps and chatter marks • What is the length 3 ? • Length of a straight line • (width of the window) • Stretched length • Proposal: a) • = reference length • (width of the window) • Form of tol. zone limits = • equidistant to theor. exact form • 0,0015 apart (width = 0,003) • location arbitrary

  14. ISO 1660 Best Fit Reference

More Related