1 / 8

Centre Of Mass

Noadswood Science, 2013. Centre Of Mass. Centre Of Mass. To calculate the centre of mass for a given object. Centre Of Mass. How can you find the centre of mass?

dalton-rowland
Download Presentation

Centre Of Mass

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Noadswood Science, 2013 Centre Of Mass

  2. Centre Of Mass • To calculate the centre of mass for a given object

  3. Centre Of Mass • How can you find the centre of mass? • Suspend the shape and a plumb line from the same point and wait until they stop moving – draw a line along the plumb line and then repeat this suspending the shape from a different pivot point • The point where the two lines cross is the centre of mass…

  4. Centre Of Mass • Where is the centre of mass? • The centre of mass hangs directly below the point of suspension (it can be thought of as the point at which the whole mass is concentrated • A freely suspended object will swing until its centre of mass is vertically below the point of suspension: -

  5. Stability • Stability is extremely important in a wide variety of objects (from F1 cars to high chairs) – if there is a high centre of mass then issues can occur… • Complete the centre of mass questions…

  6. Centre Of Mass • Only c will topple over because its centre of mass it ‘outside’ the base of the object

  7. Centre Of Mass • In the centre where the two lines cross Use a pin to freely suspend the card and draw a vertical line downwards from the pin. Repeat this procedure suspending from a different point. Where the two lines cross is the centre of mass A lower centre of mass will mean that the bus is more stable and will not topple over until tilted at a greater angle

  8. Centre Of Mass • The easiest method is to measure the angle between the floor and the line joining the bottom of the left wheels of the bus (the pivot) to the centre of mass, as shown in the diagram. Then take this angle (38o) away from 90o. You would have to tilt the bus by that angle to position the centre of mass vertically above the left wheels. 90o – 38o = 52o

More Related