1 / 30

MiPACS

MiPACS. Introduction for Sunset. Launching MiPACS. Activation Capture Icons. Gendex Activation For every image, verify the Gendex icon is active In the task bar at the bottom right of the computer, verify the Gendex icon turns from red X on sensor to green around sensor. Selecting a Template.

damian-puckett
Download Presentation

MiPACS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MiPACS Introduction for Sunset

  2. Launching MiPACS

  3. Activation Capture Icons

  4. Gendex ActivationFor every image, verify the Gendex icon is activeIn the task bar at the bottom right of the computer, verify the Gendex icon turns from red X on sensor to green around sensor

  5. Selecting a Template

  6. Viewing an Image Series 6

  7. Viewing an Image Series Red corner indicates series is not approved Yellow barrel indicates series is approved

  8. Viewing an Image Series Expanding series viewer Shows dateClick on line and drag # of images in series

  9. Removing Series Box

  10. Removing Series Box Shows only the images on screen

  11. Series Box Returned 11

  12. Overflow Area 12

  13. Overflow Area 13

  14. Retake/Add an Image

  15. Save Vs. ApproveAfter all images have been exposed and positioned in correct location in template, click the save as button.In pop up box, uncheck the “Approve all images” then click ok.Repeat this step as often as needed until ready to approve images.When ready to approve, click save as button again. This time do not uncheck the “Approve all images” box. Click Ok. Images will now be saved on the central server.

  16. Saving: Click on save as button.Box will pop up. Uncheck the Approve all images box Click OK

  17. Save Vs. ApproveWhen ready to approve, Click save as boxBox will pop up. This time do not uncheck the approve all images box, Click OK. Can no longer add to template

  18. Anatomical Naming • If image goes into a generic PA template or the overflow area and does not load into template first, a pop up box will ask for the anatomic information • This must be filled in before the series will approve

  19. Anatomical Naming

  20. Remounting a Series 20

  21. Rotating an Image

  22. Brightness/Contrast

  23. Undo/Redo

  24. Enlarging Image / Zoom

  25. Magnifier

  26. Comparing Two Series

  27. Comparing Two Series In Series, choose approved images you would like to view Highlight series you want Hold control and click to highlight the other series you want Right click-Compare To leave this screen click on the Series tab

  28. ComparingImages with Presentation Tool

  29. Removing the Date From the Image • Go to Systems at top of tool bar • Preferences • Display • Uncheck box for “Show info Label on Image” • Click OK • **Note-This is done per workstation per provider, and date can be replaced the same way.**When you close out of the workstation, the information will be saved on that workstation under your sign in

  30. Important Tips • Always check that correct patient is open • Understand the difference between saving and approving images • Saving images: • Saves to local server only, can add or retake images. Can only be view locally. • Approving images: • Sends images to central server. Cannot add to the template. Can now be view by other offices. Need to do at end of appointment. • MUST close patient in MiPACS and go back into axiUm to locate and open next patient. This can cause computer to crash, taking axiUm down with it.

More Related