Personal Protective Equipment PPE for UCLA Research Laboratories

1. Personal Protective Equipment (PPE) for UCLA Research Laboratories An Online Tutorial January 2009

2. Protecting Yourself from Laboratory Hazards

3. Protecting Yourself from Laboratory Hazards

4. Engineering Controls: The Preferred Method Engineering Controls are built into an operation and require no activation from the employee. Examples include self-capping syringe needles, ventilation systems, fume hoods and substitution to a less hazardous process or chemical.

5. Administrative Controls: Second Line of Defense Administrative Controls are changes in work practices and procedures implemented to reduce exposure. Less effective method used when engineering controls are not feasible. Examples include written operating procedures, training and limiting exposure times.

6. The Facts about PPE PPE is defined as a device or clothing worn by a worker to help prevent direct exposure to hazards. PPE is the least preferred method of protection, and should be used following engineering and administrative controls methods. Examples include gloves, lab coat and safety glasses.

7. Basic, but Important Information Always wear a lab coat in the laboratory. Do not wearing tank-tops and shorts inside a lab. Tie back or secure long hair and loose clothing. Keep beards trimmed. Wear shoes that protect or cover your feet. Do not wear flip-flops, sandals or perforated shoes.

8. Minimum Lab PPE Requirements Protective eye wear Lab coat Long pants Close-toed shoes Chemical resistant gloves (when working with hazardous substances)

9. Facts about Safety Eyewear Goggles protect against dust or splash hazards. Safety glasses are designed for impact protection from flying particles and debris. Face shield offers impact and splash protection to the face (wear with, not in place of, safety glasses or goggles). When working with lasers or UV light, specialty eyewear may be necessary. Make sure the eyewear has the proper attenuation factor and filters radiation to an acceptable level.

10. Appropriate Gloves: Chemical Compatibility Three important properties determine the type of chemical-resistant gloves worn: Chemical degradation � Some chemicals cause gloves to deteriorate, rendering them useless. For example, most organic solvents will dissolve latex rubber. Permeation rate � The rate at which a specific chemical diffuses through glove material. Breakthrough time - The amount of time required for a given chemical to penetrate through a glove.

11. Example of Glove Selection Chart from Glove Manufacturers

12. Select PPE to Protect Your Skin Choose PPE to protect against the specific agent you are working with. Cover any portion of the skin that is likely to be exposed Examples include lab coats, aprons, sleeves, coveralls, head coverings, or protective footwear.

13. Protect Against Inhalation Hazards The use of a respirator may be necessary to protect against vapors and chemical particulates. The keys to effective respirator use are proper fit and the selection of the appropriate

14. Protect Your Hearing Earplugs, muffs, canal caps and noise reduction helmets can be used to reduce the level of noise exposure. Contact your EH&S laboratory safety officer for a noise evaluation.

15. Once You Have it, Take Care of it: PPE Maintenance Always inspect PPE for damage (tears, holes, worn elastic, etc.) and contamination prior to use. If an item cannot be properly cleaned or becomes damaged it should be discarded. When in doubt, throw it out. Reusable PPE should be immediately cleaned after each use with the appropriate cleanser (usually soap and water).

16. Contamination Control Disposable items should only be used once and replaced when contaminated. Always assume PPE is contaminated: it is worn to protect against hazardous substances. Remove PPE prior to exiting the lab to help prevent the spread of contamination. Be sure you know the proper methods for putting on, taking off and fit-checking any PPE worn.

17. Avoid Contamination: A Few Tips Wash your hands after working in the lab. Do NOT eat or drink in the lab, or store any food items in the lab area. Do NOT apply cosmetics in the lab.

18. Prevent Damage: Store PPE Properly Separate from chemicals and other contaminants. Store away from sources of heat Do not store under heavy objects Be aware that some equipment may have a limited shelf life.

19. Remember the Limitations of PPE No single PPE will protect you from all hazards. Consider permeation rates, compatibility and degradation for the chemicals you are working with. PPE may limit your dexterity, vision, grip strength, or comfort. Plan your work accordingly.

20. When Choosing PPE� What engineering or administrative controls can be used instead? What are the hazards you are trying to protect against? What is the compatibility and resistance to chemical damage? Does it fit? Is it comfortable? Is it durable? Does it allow for dexterity and range of motion? Does the PPE meet any applicable standards? Would the PPE inhibit your normal work tasks? Would wearing the PPE cause other hazards?

21. For information regarding PPE selection, use or maintenance, please contact Environment, Health and Safety at (310)825-5689.