1 / 7

HKIE Structural Examination Written Examination Section 2 : Design Question Bridge

HKIE Structural Examination Written Examination Section 2 : Design Question Bridge. Ir Prof C K Lau. Objective - Test the capability of the candidates in the field of bridge engineering design.

dane-porter
Download Presentation

HKIE Structural Examination Written Examination Section 2 : Design Question Bridge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HKIEStructural ExaminationWritten Examination Section 2 : Design QuestionBridge Ir Prof C K Lau

  2. Objective - Test the capability of the candidates in the field of bridge engineering design. • Gauging - Will the candidate be employed as a structural engineer. ( suitable as a structural engineer ?) • For passing – Must satisfy the examiner in both Section A - total 40 marks ( at least 16 marks) Section B - total 60 marks ( at least 24 marks) so for passing must get ( at least 40 marks)

  3. Important points to note • Section A - TWO proposals ( schemes ) are required and marks will be given to ^ Feasibility ^ why the scheme was chosen ? ^ structural framing and layout ^ aesthetic ^ practicability ^ constructability ^ stability ^ safety So get at least 16 marks out of total 40 marks

  4. Failure Points ( must fail !! )* Unstable structure ( U-frame action in truss design not considered ! )* Structure inside / encroachment clearance envelope* Impossible to construct

  5. Section B Get at least 24 out of total 60 marks ^ Design calculations - 25 marks must cover all major elements such as beam, slab, column, foundation, abutments etc. ^ Drawings - 20 marks general arrangement – plans, elevations and sections etc. and structural details level of details - good enough for taking off quantities.

  6. ^ Details - 7 marks show your understanding about connection details of structural components/elements. ^ Programmes - 8 marks test the site experience and realization of construction activities.

  7. Prepared Yourself Good Luck

More Related