1 / 70

DVG-N5402SP

DVG-N5402SP. Agenda:. How to Access the Web Interface of the DVG-N5402SP How to Backup the Configuration of the DVG-N5402SP How to Change the LAN IP Address on the DVG-N5402SP How to Change the Wireless Channel on the DVG-N5402SP

daphne-aguirre
Download Presentation

DVG-N5402SP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DVG-N5402SP

  2. Agenda: • How to Access the Web Interface of the DVG-N5402SP • How to Backup the Configuration of the DVG-N5402SP • How to Change the LAN IP Address on the DVG-N5402SP • How to Change the Wireless Channel on the DVG-N5402SP • How to Change the Wireless Network Name or SSID on the DVG-N5402SP • How to Enable Block MAC, Allow Following PC to Access the Network on the DVG-N5402SP • How to Enable Block MAC, Deny Following PC to Access the Network on the DVG-N5402SP • How to Enable DMZ Host on the DVG-N5402SP • How to Enable Dynamic DNS on the DVG-N5402SP • How to Enable IP Filtering on the DVG-N5402SP

  3. How to Enable or Disable the DHCP Server on the DVG-N5402SP • How to Enable or Disable WPS on the DVG-N5402SP • How to Enable Port Filtering on the DVG-N5402SP • How to Enable Port Forwarding on the DVG-N5402SP • How to Enable to Disable the Wireless on the DVG-N5402SP • How to Enable UPnP on the DVG-N5402SP • How to Enable URL Filtering using URL Blacklist Option on the DVG-N5402SP • How to Enable URL Filtering using URL Whitelist Option on the DVG-N5402SP • How to Enable USB File Sharing over FTP on the DVG-N5402SP • How to Enable WEP Encryption on the DVG-N5402SP

  4. How to Enable WPA Only Encryption on the DVG-N5402SP • How to Enable WPA2 Only Encryption on the DVG-N5402SP • How to Enable WPAWPA2 Mixed Encryption on the DVG-N5402SP • How to Load the Backup Configuration File on the DVG-N5402SP

  5. How to Access the Web Interface of the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  6. The web interface will now show up on your web browser.

  7. How to Backup the Configuration of the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  8. Click on the MAINTENANCE tab and then select on Backup and Restore button on the left hand side. Under the SYSTEM – BACKUP SETTINGS section, click on Backup Settings button On the File Download dialog box, click on the Save button.

  9. On the Save As dialog box, try to locate on your computer on where you want to save the backup file and then click on the Save button Click on the Close button on the Download complete dialog box.

  10. How to Change the LAN IP Address on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  11. Click on the SETUP tab and then select on LAN Setup button on the left hand side. Enter the desired IP address under the Router IP Address section. Click on the Apply button for the settings to take effect

  12. How to Change the Wireless Channel on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  13. Click on the SETUP tab and then select on Wireless Setup button on the left hand side. Under the WIRELESS SETTINGS – WIRELESS BASIC section, click on the Wireless Basic button Under the WIRELESS NETWORK SETTINGS section, select the desired channel under the drop down menu for Wireless Channel Click on the Apply button to save the settings

  14. How to Change the Wireless Network Name or SSID on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  15. Click on the SETUP tab and then select on Wireless Setup button on the left hand side. Under the WIRELESS SETTINGS – WIRELESS BASIC section, click on the Wireless Basic button Under the WIRELESS NETWORK SETTINGS section, enter the desired name for your wireless network on the Wireless Network Name (SSID) section. Click on the Apply button for the settings to take effect

  16. How to Enable Block MAC, Allow Following PC to Access the Network on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  17. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – MAC FILTERING section, click on the MAC filtering button

  18. Under the BLOCK MAC ADDRESS RULES section, select on Enable Block MAC, allow following PC to access network on the drop down menu for Configure Block MAC Address. Put a check mark on the row to enable and enter the MAC Address of the computer to allow accessing the network Click on the Apply button for the settings to take effect

  19. How to Enable Block MAC, Deny Following PC to Access the Network on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  20. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – MAC FILTERING section, click on the MAC filtering button

  21. Under the BLOCK MAC ADDRESS RULES section, select on Enable Block MAC, deny following PC to access network on the drop down menu for Configure Block MAC Address. Put a check mark on the row to enable and enter the MAC Address of the computer to deny accessing the network Click on the Apply button for the settings to take effect

  22. How to Enable DMZ Host on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  23. Click on the ADVANCED tab and then select on Firewall and DMZ button on the left hand side Under the FIREWALL AND DMZ -- DMZ section, click on the DMZ button • Put a check mark on Enable DMZ. Under the DMZ Host section, configure the following; • WAN Connection: Select on INTERNET • DMZ Host IP Address: Enter the IP Address of the host to be access on the Internet. • Click on the Apply button

  24. How to Enable Dynamic DNS on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  25. Click on the MAINTENANCE tab and then select on Dynamic DNS button on the left hand side Under the DYNAMIC DNS LIST section, click on the Add button

  26. Under the ADD DYNAMIC DNS section, configure the following; • Put a check mark on Enable Dynamic DNS • Server Address: Select the DDNS Server where you registered • Click on the arrow button to add the server address • Hostname: Enter the hostname used to register on a DDNS Server • Username: Enter the username used to register on a DDNS Server • Password: Enter the password used to register on a DDNS Server • Verify Password or Key: Re-type the password • Click on the Apply button for the settings to take effect

  27. How to Enable IP Filtering on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  28. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – IP FILTERING section, click on the IP Filtering button

  29. Under the IP FILTERING section, Put a check mark on Enable IP Filtering Under the IP FILTERING LIST section, click on the Add button • Under the IP FILTER section configure the following; • IP: Enter the IP Address you want to deny to access the Network/Internet • TCP/UDP: Select either Both, TCP or UDP • Click on the Apply button for the settings to take effect

  30. How to Enable or Disable the DHCP Server on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  31. Click on the SETUP tab and then select on LAN Setup button on the left hand side Under the DHCP SERVER section, put a check mark on Enable DHCP Server to enable the DHCP Server function of the DCG-N5402SP or uncheck it to disable. Click on the Apply button for the settings to take effect

  32. How to Enable or Disable WPS on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  33. Click on the SETUP tab and then select on Wireless Setup button on the left hand side Under the WPS CONFIG section, Put a check mark on Enable WPS or Uncheck on it to Disable WPS. Click on the Apply button for the settings to take effect

  34. How to Enable Port Filtering on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  35. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – PORT FILTERING section, click on the Port Filtering button

  36. Under the PORT FILTERING LIST section, click on the Add button • Under the IP FILTER section configure the following; • Port Range: Enter the Port you want to blacklist to access the Network/Internet • TCP/UDP: Select either Both, TCP or UDP • Click on the Apply button for the settings to take effect

  37. How to Enable Port Forwarding on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  38. Click on the ADVANCED tab and then select on Firewall and DMZ button on the left hand side Under the FIREWALL AND DMZ – VIRTUAL SERVER section, click on the DMZ button Under the VIRTUAL SERVER section, put a check mark on Enable Virtual Server

  39. Under the VIRTUAL SERVERLIST section, click on the Add button • Under the PORT FILTERING section, configure the following; • WAN Connection(s): Select INTERNET on the drop down menu • WAN Port Range: Enter the port you want to allow to be access remotely • TCP/UDP: Select either Both, TCP or UDP depending on the port to allow. • LAN Host IP Address: Enter the IP address of the host to be access remotely • Click on the Apply button for the settings to take effect

  40. How to Enable to Disable the Wireless on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  41. Click on the SETUP tab and then select on Wireless Setup button on the left hand side. Under the WIRELESS SETTINGS – WIRELESS BASIC section, click on the Wireless Basic button Under the WIRELESS NETWORK SETTINGS section, put a check mark on Enable Wireless LAN Interface to enable the wireless function of the DVG-N5402SP or uncheck on Wireless LAN Interface to disable the wireless function of the DVG-N5402SP. Click on the Apply button for the settings to take effect

  42. How to Enable UPnP on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  43. Click on the ADVANCED tab and then select on Advanced Network button on the left hand side Under the ADVANCED NETWORK -- UPNP section, click on the UPnP button Under the UPNP CONFIGURATION section, put a check mark on Enable UPnP and then click on the Apply button for the settings to take effect

  44. How to Enable URL Filtering using URL Blacklist Option on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  45. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – URL FILTERING section, click on the URL Filtering button

  46. Under the URL FILTERING section, Put a check mark on Enable URL Filtering and then select the radio button on URL Black Filtering Under the URL FILTERING LIST section, click on the Add button Under the URL FILTER section, enter the URL you want to block and then click on the Apply button

  47. How to Enable URL Filtering using URL Whitelist Option on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

  48. Click on the ADVANCED tab and then select on Parental Control button on the left hand side Under the PARENTAL CONTROL – URL FILTERING section, click on the URL Filtering button

  49. Under the URL FILTERING section, Put a check mark on Enable URL Filtering and then select the radio button on URL White Filtering Under the URL FILTERING LIST section, click on the Add button Under the URL FILTER section, enter the URL you want to block and then click on the Apply button

  50. How to Enable USB File Sharing over FTP on the DVG-N5402SP Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address bar type in the LAN IP Address of the DVG-N5402SP which is 192.168.0.1 and then press on the Enter key on your keyboard. A login screen will appear, type in the User Name as “admin” and the Password as “password” all in lower case and then click on the Login button.

More Related