Programme Objectives Program Outcomes & Example Subject Objectives Briefing

1. Programme ObjectivesProgram Outcomes& Example Subject Objectives Briefing B.Eng (Hons) Electronics majoring in Multimedia Dr. Chang Yoong Choon Dr. Khazaimatol Shima

2. OUTCOMES OF THIS PRESENTATION • After this presentation, the participants shall: • be more aware of what EAC is looking for during an accreditation exercise/visit • be more aware of his/her roles and contributions in OBE

3. OUTLINE OF THIS PRESENTATION • EAC • Accreditation • OBE • Programme Educational Objectives • Programme Outcomes • Example Subject Objective & Outcomes

4. What Is EAC? EAC EAC BEM IEM MQA PSD Engineering Accreditation Council • Formed in 2000 Previous accreditation for engineering programs : PSD (1957)  IEM (1959)  BEM (1967)  LAN(1996) /MQA(2007)

5. What Is EAC? Engineering Accreditation Council • Formulates and updates accreditation policies and criteria • Approves guidelines and operating procedures • Oversees operational arrangements and appoints evaluation panel • Receives evaluation reports and decides on accreditation • Responds to complaints, appeals or any proposals for change • Oversees development and operation of accreditation and mutual recognition agreement with other countries • Fosters the dissemination of developments and best practices in engineering education

6. Why Need Accreditation? Governed by the REGISTRATION OF ENGINEERS ACT 1967 (Revised 2002) • No person is allowed to practice unless he is a professional engineer • Professional engineer may use “Ir” before his name OR “PEng” after his name • Graduate engineers to register before taking up employment as an engineer

7. Why Need Accreditation? • graduate engineers to register before taking up employment as an engineer Those who has successfully completed an accredited engineering programme Professional Engineer - a graduate engineer who has obtained the prescribed practical experience, passed the Professional Assessment Examination, and satisfied all other requirements of the Board of Engineers (BEM)

8. Why Need Accreditation? International Mobility (Washington Accord) • The Washington Accord (WA): Agreement that establishes equivalence of other countries’ accredited professional engineering programs. • Accredited Engineering Graduates are recognized by other signatory countries - Possible employment as engineers in those countries without further examinations.

9. Why Need Accreditation? International Mobility (Washington Accord) • Established in 1989, as of 2007, the following countries are full members of WA: Australia, Canada, the Republic of Ireland, Hong Kong, Japan, New Zealand, Singapore, South Africa, South Korea, Taiwan, the UK and the USA. • The following countries are provisional members of the WA and may become a full member in the future: Germany, India, Malaysia (since 2003), Russia, Sri Lanka.

10. Why Need Accreditation? Our last accreditation was in 2004 for 5-years Next accreditation visit will be in July 2009 - for intakes of 2005 & onwards Our programme has been accredited before, so what’s the big deal? Programmes to be accredited in 2009 will have to be based on OBE! NOOBE =NOACCREDITATION

11. EAC Accreditation Criteria • Academic Curriculum • Students • Academic and Supporting Staff • Facilities • Quality Management System

12. EAC Accreditation Criteria • Academic Staff • Academic qualifications • Professional qualification, experience & development • Research/publication/consultancy • Industrial involvement • Teaching load/contact hours • Motivation and enthusiasm • Use of lecturers from industry/public bodies • Aware and practice of OBE

13. Deficiencies of Traditional Education • Provides students with a learning environment with little attention to whether or not students ever learn the material. • Students are given grades and rankings compared to each other – students become exam orientedor CGPA driven. • Graduates are not completely prepared for the workforce. • Lack of emphasis on soft skills needed in jobs e.g. communication skills, interpersonal skills, analytical skills, etc.

14. What Is Outcome Based Engineering Education? IT’S NOT WHAT WE TEACH, IT’S WHAT YOU LEARN

15. Introducing OBE • OBE is an educational process. • Directed/focussed at achieving certain specified outcomes in terms of individual student learning. • Outcomes - key things students should understand and be able to do or the qualities they should develop. • Both structures and curricula are designed to achieve those capabilities or qualities. • Educational structures and curriculum are regarded as means not ends. If they do not do the job they are rethought (Continuous Quality Improvement (CQI)).

16. Outcome-Based Education Employers Rating of Skills/Qualities – 2002 • Communication (verbal & written) 4.69 • Honesty/Integrity 4.59 • Teamwork skills 4.54 • Interpersonal skills 4.50 • Strong work ethics 4.46 • Motivation & initiative 4.42 • Flexibility/adaptability 4.41 • Analytical skills 4.36 • Computer skills 4.21 • Organisational skills 4.05 • Detail oriented 4.00 • Leadership skills 3.97 • Self confidence 3.95 • Friendly/outgoing personality 3.85 • Well mannered / polite 3.82 • Tactfulness 3.75 • GPA (3.0 or better) 3.68 • Creativity 3.59 • Sense of humour 3.25 • Entrepreneurial skills/risk taker 3.23

17. Outcome Based Education • Shifting from measuring input and process to include measuring the output (outcome) Input Process Output From a Resource- or Input-Based or Process-Based Approach to an Outcome-Based Approach

18. Outcome Based Education (OBE) OBE is a process that involves the restructuring of curriculum, assessment and reporting practices in education to reflect the achievement of high order learning and mastery rather than accumulation of course credits. Amongst Expected Changes: • Curriculum Restructuring/Revision • Innovative/Flexible Delivery Method • Variety of Assessment & Evaluation Methods • Collection of Evidences • Continuous Quality Improvement (Closing the Loop)

19. Outcome Based Education (OBE) OBE addresses the following key questions: • What do you want the students to have or able to do? • Howcan you best help students achieve it? • How will you know whether they have achieved it? • How do you close the loop?

20. The Relevancy of OBE Rating/Accreditation requirements: • Quality Assurance Audit by the Ministry of Higher Education: Malaysian Qualifications Framework (MQF) – emphasis on learning outcomes. • Accreditation Requirement for Engineering Programme by the Engineering Accreditation Council (EAC): The New Accreditation Manual emphasizes learning outcomes – Related to the Washington Accord - A Global Dimension.

21. Some Real Benefits of OBE Anticipation of real benefits • More directed & coherent curriculum • Graduates will be more “relevant” to industry & other stakeholders (more well rounded graduates) • Continuous Quality Improvement (CQI) is an inevitable consequence

22. Continuous Improvement Say what you do Improve it Do what you say Prove it

23. Programme Educational Objectives (PEO) • Programme Objectives are specific goals describing expected achievements of graduates in their career and professional life after graduation, and shall be: • consistent with the mission and vision of the IHL, and • responsive to the expressed interest of various groups of programme stakeholders Long term outcomes (5 years or more from the time of graduation)

24. Programme Objectives (PEO) for Multimedia Engineeringhttp://foe.mmu.edu.my/main/undergrad/beng_multi.html • To produce highly competent engineers in electronics engineering with specialization in multimedia. • To develop technical leaders who understand the electronics and multimedia related industry needs of the country

25. Programme Outcomes (PO) http://foe.mmu.edu.my/main/undergrad/beng_multi.html Programme Outcomes are statements describing what students are expected to know and be able to perform or attain by the time of graduation, and shall. These relate to the skills, knowledge, and behaviours that student acquire through the programme, and are linked to the Programme Objectives Short term outcomes (at the point of graduation)

26. Programme Outcomes (PO) for Multimedia Engineeringhttp://foe.mmu.edu.my/main/undergrad/beng_multi.html • Ability to acquire and apply fundamental principles of science and engineering. • Capability to communicate effectively. • Acquisition of technical competence in specialised areas of engineering discipline. • Ability to identify, formulate and model problems and find engineering solutions based on a systems approach. • Ability to conduct investigation and research on engineering problems in a chosen field of study. • Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions.

27. Programme Outcomes (PO) for Multimedia Engineeringhttp://foe.mmu.edu.my/main/undergrad/beng_multi.html • Understanding and commitment to professional and ethical responsibilities. • Ability to work effectively as an individual, and as a member/leader in a team. • Ability to be a multi-skilled engineer with good technical knowledge, management, leadership and entrepreneurial skills. • Awareness of the social, cultural, global and environmental responsibilities as an engineer. • Capability and enthusiasm for self-improvement through continuous professional development and life-long learning.

28. Example Programme Outcomes from EMM3126Taken from the syllabus – see the syllabi of other subjectsto find their respective ones. • Ability to acquire and apply fundamental principles of science and engineering - 10% • Capability to communicate effectively - 5% • Acquisition of technical competence in specialised areas of engineering discipline - 60% • Ability to identify, formulate and model problems and find engineering solutions based on a systems approach - 5% • Ability to conduct investigation and research on engineering problems in a chosen field of study - 10% • Understanding of the importance of sustainability and cost-effectiveness in design and development of engineering solutions - 5% • Ability to work effectively as an individual, and as a member/leader in a team - 5%

29. Example Subject Learning Outcomes from EMM3126Taken from the syllabus – see the syllabi of other subjectsto find their respective ones. • At the completion of the subject, students should be able to: • Apply the basic concepts of transformation used in image and video compression. • Apply the basic concepts of image compression and its applications in electrical engineering such as digital image (JPEG). • Apply the basic concepts of video compression and its applications in electrical engineering such as digital video transmission. • Apply the basic concepts of Image and Video indexing and retrieval techniques • Calculate the peak signal to noise ratio (PSNR) between the current video frame and the previous video frame • Convert an image from RGB format to YCbCr format • Design a simple JPEG encoder and decoder

30. The End Q & A

31. Acknowledgement The materials contained in this presentation are extracted from EAC Training Workshop 2006 & 2009 Modules: Prof. Dr. Wan Hamidon (UKM) Assoc. Prof. Ir. Megat Johari (UPM) Prof. Dr. Shahrin Mohamad (UTM) Prof. Dr. Jailani Mohd. Noor (UKM) Assoc. Prof. Dr. Mohd. Saleh Jaafar (UPM)