1 / 12

ladder to sector out2 bond fixture

ladder to sector out2 bond fixture. HFT PIXEL 11/16/2008. ladder to out2 bond fixture.SLDASM. parts to build. sector chuck, important tolerances. surface to pin 4 mil (z locator.SLDPRT). top surface flat to 1 mil. curved edge to pins – 4 mil. a possible machining sequence.

darcie
Download Presentation

ladder to sector out2 bond fixture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ladder to sector out2 bond fixture HFT PIXEL 11/16/2008 ladder to out2 bond fixture.SLDASM

  2. parts to build

  3. sector chuck, important tolerances surface to pin 4 mil (z locator.SLDPRT) top surface flat to 1 mil curved edge to pins – 4 mil

  4. a possible machining sequence sector chuck out2 base.SLDPRT critical features for last? locating pin holes and curved edge • machine all features except joining holes and listed critical features • match drill pin location holes and joining bolt holes • pin parts and grind top surface • machine listed critical features sector chuck out2 cap.SLDPRT

  5. sector chuck parts locating pin diamond MMC 8472A19.SLDPRT locating pin MMC 8472A11.SLDPRT ¼-20 x 1.5 in, 1 of 4 bullet nose liner MMC 31335A51, 1 of 3 bullet nose aligning pin MMC 31335A11, 1 of 2 z locator.SLDPRT ¼-20 x 1 in, 1 of 2 sector chuck out2 base.SLDPRT plunger pin 1lb MMC 3360A560, 1 of 2 sector chuck out2 cap.SLDPRT bullet nose diamond aligning pin MMC 31335A31 1.5 in post hex MMC 91780A361, 1 of 4 note: locator pins listed as SLDPRTs are purchased parts that require modification we will send in order for all McMaster-Carr parts

  6. sector chuck features break external edges 1/4 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 3/8" Tube OD X 1/4" NPTF Male Pipe MMC 9087K23 sector chuck out2 base.SLDPRT

  7. sector chuck features ¼-20 x2 helicoil sector chuck out2 base.SLDPRT

  8. sector chuck features fillets not important can be r=0 to 10 mm sector chuck out2 base.SLDPRT

  9. ladder chuck, important tolerances surface flatness and levels good to 1 mil surface flatness and levels good to 4 mil diameters and positions good to 4 mil ladder chuck.SLDPRT

  10. ladder chuck parts ¼-20 x 1in, 1 of 4 plunger pin 3 lb MMC 3360A330, 1 of 4 ladder chuck handle.SLDPRT, 1 of 2 ladder chuck.SLDPRT ladder chuck.SLDASM

  11. ladder chuck features break external edges 1/4 -20 x 2 helicoil ladder chuck.SLDPRT ¼-20 tap same other end 1/4 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 3/8" Tube OD X 1/4" NPTF Male Pipe MMC 9087K23

  12. under side with fittings

More Related