1 / 21

Second Law of Thermodynamics Engines and Refrigerators

Second Law of Thermodynamics Engines and Refrigerators. Heat Engine. Any device that transforms heat partly into work or mechanical energy * working substance – matter inside the engine which undergoes inflow and outflow of heat, expansion and compression, and sometimes phase change.

dareh
Download Presentation

Second Law of Thermodynamics Engines and Refrigerators

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Second Law of ThermodynamicsEngines and Refrigerators

  2. Heat Engine • Any device that transforms heat partly into work or mechanical energy *working substance – matter inside the engine which undergoes inflow and outflow of heat, expansion and compression, and sometimes phase change

  3. how it works • Working substance absorbs heat from the hot reservoir • Performs some mechanical work • Discards the remaining energy in the form of heat into the cold reservoir *cyclic process Young

  4. 1st law applied to WS QH>0: WS absorbs heat from HR QC<0: WS discards heat into CR W>0: WS performs mechanical work U=0 after one cycle 1st law: Q = U + W Qnet = W QH + QC = W |QH| - |QC| = |W|

  5. thermal efficiency e = W/QH = (|QH|-|QC|)/|QH| = 1 –(|QC|/QH|)

  6. Refrigerator • takes heat from a cold place and gives of heat to a warmer place • requires a net input of mechanical work working substance – refrigerant fluid cold reservoir – inside of refrigerator hot reservoir – outside of refrigerator

  7. how it works • fluid absorbs heat from the cold reservoir • work is done on the fluid • energy from heat transfer and work done is discarded into the hot reservoir • *cyclic process Young

  8. the fluid in the evaporator coil is colder than the inside of the ref, so it absorbs heat • the compressor takes in fluid and compresses it adiabatically (work is done on the fluid) • fluid is delivered to condenser at high pressure, fluid temperature is higher than that of surrounding air, fluid gives of heat and condenses • fluid expands adiabatically (expansion valve) into the evaporator and cools considerably Young

  9. 1st law applied to fluid QC>0: fluid absorbs heat from CR QH<0: fluid discards heat into HR W<0: work is done on fluid U=0 after one cycle 1st law: Q = U + W Qnet = W QH + QC = W -|QH| + |QC| = -|W| |QC| + |W| = |QH|

  10. coefficient of performance K = |QC|/|W| = |QC|/(|QH|-|QC|)

  11. A heat engine takes in 1200 J of heat from the high-temperature heat source in each cycle and does 400 J of work in each cycle. How much heat is released into the environment in each cycle? 400 J 800 J 1200 J 1600 J

  12. A heat engine takes in 1200 J of heat from the high-temperature heat source in each cycle and does 400 J of work in each cycle. What is the efficiency of this engine? ¼ 1/3 3 4

  13. In one cycle, a heat engine takes in 900 J of heat from a high-temperature reservoir and releases 600 J of heat to a lower-temperature reservoir. How much work is done by the engine in each cycle? 300 J 600 J 900 J 1500 J

  14. In one cycle, a heat engine takes in 900 J of heat from a high-temperature reservoir and releases 600 J of heat to a lower-temperature reservoir. What is its efficiency? 3/9 6/9 3/15 6/15

  15. In one cycle a heat engine does 400 J of work and releases 500 J of heat to a lower-temperature reservoir. How much heat does it take in from the higher-temperature reservoir? 100 J 400 J 500 J 900 J

  16. In one cycle a heat engine does 400 J of work and releases 500 J of heat to a lower-temperature reservoir. What is the efficiency of the engine? 4/9 4/5 5/9 1

  17. In one cycle, a heat engine takes in 1000 J of heat from a high-temperature reservoir, releases 600 J of heat to a lower-temperature reservoir, and does 400 J of work. What is its efficiency? ¼ 1/3 2/5 3/5

  18. A heat pump takes in 300 J of heat from a low-temperature reservoir in each cycle and uses 150 J of work per cycle to move the heat to a higher-temperature reservoir. How much heat is released to the higher-temperature reservoir in each cycle? 150 J 300 J 450 J 600 J

  19. A heat pump takes in 300 J of heat from a low-temperature reservoir in each cycle and uses 150 J of work per cycle to move the heat to a higher-temperature reservoir. What is the coefficient of performance (COP)? 1/3 1/2 2 3

  20. In each cycle of its operation, a refrigerator removes 18 J of heat from the inside of the refrigerator and releases 30 J of heat into the room. How much work per cycle is required to operate this refrigerator? 12 J 18 J 30 J 48 J

  21. In each cycle of its operation, a refrigerator removes 18 J of heat from the inside of the refrigerator and releases 30 J of heat into the room. What is the COP of this refrigerator? 18/12 30/12 12/30 18/30

More Related