Visual Basic to C#

1. Visual Basic to C# Computer Programming II Summer 2011

2. Purpose This PowerPoint is for students that received instruction in Computer Programming I using the Visual Basic language. Computer Programming II uses the C# language. This lesson will introduces the differences between VB and C#.

3. Essential Standard • This PowerPoint reviews variables, decision making statements, arrays, and methods (sub procedures). Major differences between C# and VB are also covered. • C# is very different from VB in one KEY way. All statements MUST end with a semicolon (;). If you forget this, your code will not work. Exceptions: IF statements and loops • The upside to this is two-fold: • 1. Multiple coding statements may be on the same line • 2. A long code segment can be spilt up without having to use an underscore like in VB.

4. Spacing C# Examples • intintAge; string strName; • Two different statements- same line • Long line of code: • string query = @"SELECT whateverFROM tableNameWHERE column = 1"; • Both are perfectly valid statements in C#.

5. Semicolon Exceptions • Two exceptions to the semicolon rule: if(x==b)  no semicolon here It is a “clause” - only part of the statement { y=7; semicolon as normal } while(x< i)  no semicolon here either – again it is a “clause” { intGradeTotal=intGrade; semicolon as normal }

6. Declaring a Variable • In VB we use the Dim keyword to declare a variable: • Dim intAge as Integer • C# handles this differently: • intintAge; • In C# use the following format: • DataTypevariableName; • All types are spelled out except integer (int) and character (char).

7. C# Examples string strName; char charGrade; intintAge; double dblTaxRate;

8. Coding Blocks • In VB we use the End keyword to end coding blocks like IF statements or loops. If a = b Then b=c End If • In C#, we use braces so this code block would be written: if(a==b) { b=c;}

9. Equality Check (==) You might of noticed something on the last slide- a == in the if statement. In VB the assignment operator and equality are the same (=). This is NOT true in C#. The equals sign is solely used for assignment. To check for equality you must use ==. Using = in an if statement to check for equality is a logic error. The code will run properly, but not produce the intended result. (It will always be false.)

10. Increment Counters • In VB to add one to a counter we use varName += 1, for two we use +=2 and so on. (i+=1) • This shorthand works in C# as well, but C# provides an additional way to add or subtract one from a counter. i++; i--; • ++ adds 1 to the value of i while -- subtracts one. Remember the semicolon is required. • To count by 2, or another number, we use the same shorthand is in VB (i+=2).

11. IF Statements In C# we do not use THEN keyword as in VB. The comparison is enclosed in ( ) after the if keyword. if (a < b) { Statements } All statements after the if (to be run if the if is true) that would be executed are enclosed in braces ( { } ).

12. IF..Then..Else Example if(a > b) { b=c; d= 7; } else { b=5;d=4; }

13. Else If C# handles multiple else if statements a little differently as well. There is a space between else and if unlike in VB. As in VB there can be multiple else ifs and a else (default) if all statements are false. if (a == b) {c = 12;} else if (a>b) {c=14;} else if (a < b) { c = 16; } else { c = 10; }

14. If Statements in Assignment Statements • Like VB, C# supports an if statement in an assignment statement. However the format is completely different: string strName = (a < b) ? "less than 10" : "greater than 10"; • ? is called the ternary operator.

15. And/Or & Short Circuiting • In VB we use the And/Or keywords in compound if statements. • C# • And = & • Or = | • To short circuit the statement use && (and) or || (or).

16. Examples • else if (number < 15 & number > 5) • Using and • else if(number > 50 | number < 25) • Usingor • else if (number < 15 && number > 5) • Using short circuit and • else if(number > 50 ||number < 25) • Using short circuit or

17. Select Case • The Select Case statement in VB do not exist in C#. Instead C# has the switch keyword. This operates similarly to Select Case, but has some key differences. Let’s refresh our memory with an example: Select case intGrades Case 90 to 100 strGrade= “A” Case 80 to 89 strGrade=“B” Case 70 to 79 strGrade=“C” Case 60 to 69 strGrade=“D” Case Is < 60 strGrade=“F” Else Messagebox.show(“Please input a valid number!”) End Select

18. Switch switch(intGrades) { case 10: case 9: strGrade="A"; break; case 8: strGrade="B"; break; case 7: strGrade = "C"; break; case 6: strGrade="D"; break; case 5: case 4: case 3: case 2: case 1: strGrade = "F"; break; } • Notice instead of using the To keyword we can just assign multiple cases to a given statement. • The break; as the end of each case is required or the program will continue to read through the statements. • There could be multiple true cases in C# unlike VB which stops after finding ONE true case. • Break prevents this which is almost always the desired outcome.

19. Switch 2 If all cases are false and we want an action to occur we use the default keyword: switch (caseSwitch) { case 1: Console.WriteLine("Case 1"); break; case 2: Console.WriteLine("Case 2"); break; default: Console.WriteLine("Default case"); break; }

20. Select Case vs. Switch The C# Switch statement does not allow ranges or comparisons like the Select Case statement in Visual Basic. It also does not allow Boolean comparison. This is one place where the VB implementation is superior to the C# one.

21. Loops • VB and C# each support the following loops: • Do • While • For • For each • In C# loops are written in the same syntax as an if statement: while(i< intNum)remember no semicolon on this line { Code to run in the loop;  semicolon at the end of each code statement unless using a if statement }

22. Loop Examples while (i <= 50) //pretest loop { intResult= intResult + i; i++; } do { intResult = intResult + i; i ++; } while (i <= 50) //posttest loop

23. For Statements For statements are written completely differently in C#: for(i=0; i<=50; i++) {intResult= intResult + i; } VB: For i as Integer = 0 to 50 intResult= intResult + i Next i Condition Initializer Modifier – increment or decrement Initializer Condition Modifier – increment or decrement – Uses Step if other than add 1.

24. Step Keyword In VB to count by a value other than 1 we use the Step keyword. This is not supported in C#. To count by a value other than 1 we change the end of the statement. To count by 2’s upward for example: for(i=0; i<=50; i+=2) To decrease by 2: for(i=100; i>=50; i-=2)

25. For each The for each loop is handled differently in C# as well. foreach(int j in intArray) //no space { lstGrades.Items.Add(j); } VB: For Each j In intArray lstGrades.Items.Add(j) Next j

26. Arrays • In VB we use ( ) in array statements. In C# [ ] are used instead. • Dim intArray = New Integer(4) {1, 2, 3, 4, 5} (VB) • int[] intArray = new int[5] {1,2,3,4,5}; (C#) • In VB we put in 1 less than the number of elements we want in the array. This is NOT the case in C#. If we want five elements we use a 5. • Arrays are still index-based starting at 0.

27. Applying Functions/Methodsin C# Computer Programming I Summer 2011

28. Breaking it Up As programs gets more complex- they become longer and harder to debug or even figure out what exactly is going on. Functions, also called Methods, provide a way to break up long coding segments and reduce repeated code.

29. Declare a Method • When you declare a method, you will follow a specific formula for the method headeraccess_modifierreturn_type Name () • Access Modifier • We will only use the public in this course. • You can use private which would restrict use of the method. • Return Type • The return type will either be void, if there is no value being returned, or it will be the data type of the value being returned.

30. Declare a Method Method Header Example: public void Signature() {lblResult.Text = “Created by J Smith”; } To use the method, you will “Call” it when wanted. Signature();

31. Methods with Parameters Parameters provide information to a method that is necessary to do its job. The method call provides the values – called actual arguments. You will add the “formal arguments” or “parameters” to the method header. public void Signature(string Name )

32. Methods with Parameters Method: public void Signature(string Name ) {lblResult.Text = “Written by: ” + Name; } Call: Signature(strName); The arguments and parameters MUST match in order, data type and number.

33. Methods that Return a Value When you specify a return type you will add a return statement. Method Header Example: public string Signature() {return “Created by J Smith”; } Return data type and what is returned MUST match. Return Type

34. Methods that Return a Value When a method returns a value, the method call must be part of an assignment statement. Method Call Example:lblResult.Text = Signature();

35. Two Ways to Pass Arguments • There are two ways to pass arguments. • Pass-by-Value • Pass-by-Reference • Pass-by-Value is how we passed the variable strName earlier.

36. Pass-By-Value • This is the default way to pass arguments in C#. • A copy of the value is made and sent to the method. • Any changes are not passed back to the call. • Think of this as a one way street; the value only moves in one direction.

37. Pass-By-Reference • The method has the ability to access and modify the original variable from the call. • Reference-type variables store references to objects. • Think of it as sending the actual address of the object for the method to access the value. The method can then manipulate that value and send it back.

38. Pass-By-Reference • To pass a variable by reference use the keywordref. • Apply the ref keyword to the parameter declaration allows you to pass that variable by reference. • The ref keyword is used for variables that already have been initialized in the calling method. • It must be initialized, otherwise the compiler will generate an error.

39. Pass-By-Reference public void Calculate(int num1, refint num2) { num2 = num1 + 1; } private void btnCalc_Click(object sender, EventArgs e) { int n1 = 0; int n2 = 0; Calculate(n1, ref n2); lblResult.Text = n2.ToString(); //displays 1 in label }

40. Conclusion • This PowerPoint provided an overview of creating methods in C#. • Next step is to practice with sample programs the skilled students have learned! The Unpacked Content will provide some sample programs. • For more information on this topic • http://msdn.microsoft.com/en-us/library/aa645760(v=VS.71).aspx