1 / 2

注射式長效抑菌性之引導組織再生阻隔材研究

注射式長效抑菌性之引導組織再生阻隔材研究.

darrel-levy
Download Presentation

注射式長效抑菌性之引導組織再生阻隔材研究

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 注射式長效抑菌性之引導組織再生阻隔材研究 • 對於牙周病臨床治療而言，感染的預防扮演著極重要角色，本研究目的係以聚乳酸為基材，並導入幾丁聚醣，以開發出具有長效抑菌效果的可注射式引導組織再生材（Guided tissue regeneration barriers, GTR barriers），實驗顯示Chitosan在PLA溶液中最高含量為0.08 wt%。在對Actinobacillus actinomycetemcomitan之抑菌測試結果，額外添加2 wt%幾丁聚醣粉末於PLA/Chitosan/ACP barriers中，在第八天後抑菌效果比含有5 wt% Doxycycline高出約2.25倍，並於十八天後仍可維持56.58 %的抑菌效果。另外，以聚乳酸/幾丁聚醣作為基材並添加不同比例的非晶型磷酸鈣，經過水洗固化後可得白色片狀沉澱物，於室溫下靜置48小時後，複合材之體積呈現膨脹且具有可塑形之特性，以熱重分析儀與流變儀分析樣品之含水率與屈伏應力，結果顯示不同ACP含量對複合材含水率與屈伏應力具有消長變化，而PLA/Chitosan/ACP之可塑程度與其所吸收之水份多寡有關，推測可能機制為ACP磷酸鈣鹽解離後之金屬離子與幾丁聚醣之胺基透過螯合作用或靜電吸引之交互作用，形成具吸水性之離子團簇（Ionic cluster）分散於疏水性之聚乳酸基材中。

  2. Long-lasting Anti-bacterial Injectable Guided Tissue Regeneration Barriers • Inflammation inhibition played an important role in periodontal treatment. The purpose of this study is to develop an long-lasting anti-bacterial injectable Guided Tissue Regeneration barriers (GTR barriers) compling antibacterial effect by acceding chitosan and ACP to PLA. The highest solubility of chitosan was about 0.08 wt %.The result of antibacterial test for Actinobacillus actinomycetemcomitan revealed that the antibacterial ability was 2.25 times higher when adding another 2wt% chitosan to the PLA/Chitosan/ACP barriers, compared to 5wt % Doxycycline after the eighth day. And the PLA/Chitosan/ACP barriers with additional 2 wt% chitosan still maintain 56.58 % antibacterial ability after eightieth day. The different composition of PLA/Chitosan/ACP composites was prepared by water washing solidification from NMP/water/lactic acid consolvent. After storing at room temperature for 48 hours and taking it out to obtain a shapable composites. To investigate the influence of ratio of composition with the shapable property of composites, it was analyzed by Rheometer, TGA, AFM, XRD. The result of the different APC content had different effect both water content and yield stress of composite materials. The yield stress decreased with ACP content while increases. It was derived that ions, released from ACP interact with amide groups of chitosan to form water-absorbing ionic clusters through chelating or electrostatic attraction.

More Related