190 likes | 385 Views
IdeaPad G430/G530 - Hardware Disassembly -. Lenovo GCR LTS. Disclaimer. This presentation contains specifications about unannounced products that Lenovo intends to bring to market. Please keep it confidential.
E N D
IdeaPad G430/G530 - Hardware Disassembly - Lenovo GCR LTS
Disclaimer This presentation contains specifications about unannounced products that Lenovo intends to bring to market. Please keep it confidential. This information is subject to change without prior notice. Lenovo reserves the right not to bring any of these products to market. These products might not be made available in all countries. If you get a call prior to Announcement, you can discuss this information ONLY IF the customer is able to give you a valid machine type and serial number (of the machine they have in their possession). This presentation is for Lenovo Authorized Service Partners (LASPs) Internal Use Only! Otherwise, you are not to disclose this information until Announcement. Placeholder-presentation title | 6 April, 2006 Lenovo Y510 Series - Product Training
Appearance Placeholder-presentation title | 6 April, 2006
Remove Battery 1、Turn the notebook over. 2、Unlock and hold the latch, and remove the battery. Placeholder-presentation title | 6 April, 2006
Remove HDD Module Remove three screws and take the HDD away. Placeholder-presentation title | 6 April, 2006
Remove ODD Module Remove one screw and pull the ODD out of the notebook. Placeholder-presentation title | 6 April, 2006
Remove Memory Module Remove 2 screws then take the CPU door away. Placeholder-presentation title | 6 April, 2006
Remove Memory Module Pull two latches and pop the Memory module up to the 45°angles, and then pulling out the module in that angle. Placeholder-presentation title | 6 April, 2006
Remove Fan Remove all screws on the fan then take the fan away. Note: Be careful the connect antenna. Placeholder-presentation title | 6 April, 2006
Remove Heatsink Module 4 1 3 2 Remove all screws on heat sink then take the heat sink away. Placeholder-presentation title | 6 April, 2006
Remove Wireless Module • Remove 1 screw and take away the cover,remove the 1 screw and antennas here and pop the module up to a 45ºangles, and then pulling out the module in that angle. Placeholder-presentation title | 6 April, 2006
Remove Keyboard Cover Module • 1、 Remove 5 screws ; Placeholder-presentation title | 6 April, 2006
Remove Keyboard Cover Module • 2、Lift up the keyboard cover and put it in front of top case. Disconnect the LED cable and lauch board cable. Then take the keyboard cover away. Placeholder-presentation title | 6 April, 2006
Remove Keyboard Module • Remove 2 screws ,Lift up the keyboard and lay it in front of top case then disconncet the keyboard FPC .Now take the keyboard away. Placeholder-presentation title | 6 April, 2006
Remove Modem Module • Remove one screw , pop the module up and then pulling out the module. Placeholder-presentation title | 6 April, 2006
Remove LCD Module • Disconnect the three connector cables and remove both sides screws ,then take the LCD away. Placeholder-presentation title | 6 April, 2006
Remove Top Case Module • Remove all screws on bottom case ; Placeholder-presentation title | 6 April, 2006
Remove Top Case Module • Disconnect one cables and then lift top case away. Placeholder-presentation title | 6 April, 2006
Remove Motherboard • Remove all screws and disconnect 2 cables and take the motherbaord away. Placeholder-presentation title | 6 April, 2006