Total Productive Maintenance and Maintenance Management

1. Total Productive Maintenanceand Maintenance Management Lean Manufacturing Series

2. Disclaimer and Approved Use • Disclaimer • This presentation is intended for use in training individuals within an organization. The handouts, tools, and presentations may be customized for each application. • THE FILES AND PRESENTATIONS ARE DISTRIBUTED ON AN "AS IS" BASIS WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED. • Copyright • This presentation is created and copyrighted by LeanPresentations.com, owned and operated by Kanso Strategies LLC. • Approved Use • Each copy of this presentation can be used throughout a single Customer location, such as a manufacturing plant, or by a single Consultant or trainer when at multiple clients. Contact us for authorization to use this presentation at multiple locations. • The presentation may be customized to satisfy the customer’s application. • The presentation may not be re-sold or re-distributed without express written permission. • Current contact information can be found at: www.leanpresentations.com

3. Outline • What is Total Productive Maintenance • Origins of TPM • TPM Principles • Components of TPM • Autonomous Maintenance • Planned Maintenance • Equipment & Process Improvement • Early Management of New Equipment • Process Quality Management • TPM in the Office • Implementing TPM • TPM Benefits • Maintenance Management & Strategy

4. What is TPM • A company-wide team-based effort to build quality into equipment and to improve overall equipment effectiveness • Total • all employees are involved • it aims to eliminate all accidents, defects and breakdowns • Productive • actions are performed while production goes on • troubles for production are minimized • Maintenance • keep in good condition • repair, clean, lubricate

5. Autonomous Maintenance • 7 steps are implemented to progressively increase operators knowledge, participation and responsibility for their equipment • Perform initial cleaning and inspection • Countermeasures for the causes and effects of dirt and dust • Establish cleaning and lubrication standards • Conduct general inspection training • Carry out equipment inspection checks • Workplace management and control • Continuous improvement

6. Early Management of New Equipment • Objective: establish systems to shorten • new product or equipment development • start-up, commissioning and stabilization time for quality and efficiency • New equipment needs to be: • easy to operate • easy to clean • easy to maintain and reliable • have quick set-up times • operate at the lowest life cycle cost

7. 7: Develop Equipment Management Program • The tools of Total Quality Management and Continuous Improvement are applied to the management and improvement of equipment • Form project teams • Select model equipment • identify equipment problems • analyze equipment problems • develop solutions and proposals for improvement

8. The Strategic Importance of Maintenance and Reliability • Failure has far reaching effects on a firm’s • operation • reputation • profitability • customers • product • employees • profits

9. Tactics for Reliability and Maintenance • Reliability Tactics • improving individual components • providing redundancy • Maintenance Tactics • implementing preventive maintenance • increasing repair capabilities

10. Organizing the Maintenance Function • Centralized maintenance department • Does all maintenance (PM & breakdown) • Decentralized maintenance department • Useful if different equipment used in different areas of company • Contract maintenance • Used if little equipment or expertise • Operator ownership approach

11. Increasing Repair Capabilities:Features of A Good Maintenance Facility • Well-trained personnel • Adequate resources • Ability to establish a repair plan and priorities • Ability and authority to do material planning • Ability to identify the cause of breakdowns • Ability to design ways to extend MTBF