1 / 9

TGai Upper Layer Setup Proposal

TGai Upper Layer Setup Proposal. Authors:. Date: 2011-07 - 17. Abstract. This document describes a technical proposal for TGai which addresses the following phase. Upper Layer Setup. Upper Layer Information IE.

daryl
Download Presentation

TGai Upper Layer Setup Proposal

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TGai Upper Layer Setup Proposal Authors: Date: 2011-07-17 Hitoshi Morioka, ROOT INC.

  2. Abstract This document describes a technical proposal for TGai which addresses the following phase. • Upper Layer Setup Hitoshi Morioka, ROOT INC.

  3. Upper Layer Information IE • We, IEEE802.11, should specify only a container IE which deliver upper layer information. • Because • Our scope is L1 and L2. • IP specific contents should be specified by IETF. • So we should make liaison to IETF and discuss in IETF. Hitoshi Morioka, ROOT INC.

  4. An Example Solution • We intend to show just technical probability by this example. • Detailed specification should be discussed in IETF. Hitoshi Morioka, ROOT INC.

  5. DHCPv4 Client Server • Usually 4 messages are exchanged in DHCPv4. • DHCPv4 allows multiple servers on a single subnet. • DHCPREQUEST is broadcasted to notify which server is selected. DHCPDISCOVER (Broadcast) DHCPOFFER (Unicast or Broadcast) DHCPREQUEST (Broadcast) DHCPACK (Unicast or Broadcast) Hitoshi Morioka, ROOT INC.

  6. FILS delivers DHCP messages STA AP DHCP Server FILS message • STA put a DHCP message to UpperLayer Information IE and transmit to AP. • AP picks up the DHCP message from Upper Layer Information IE, then constructs complete DHCP message and transmit it to DHCP Server. • And vice versa. Upper Layer Info IE DHCP message FILS message DHCP message Upper Layer Info IE Hitoshi Morioka, ROOT INC.

  7. Modifications • Maximum length of IE is limited to 256 octet. So one DHCP message may be divided into multiple IEs. • If FILS uses only one round-trip message exchange, more modifications are required. Hitoshi Morioka, ROOT INC.

  8. One Round-trip DHCP modification DHCP Server STA AP DHCP Server • When AP starts up, AP transmit DHCPDISCOVER to DHCP Servers. • DHCP servers transmit DHCPOFFER to the AP. • The AP selects one DHCP server and broadcast DHCPREQUEST without IP address assignment. • The selected DHCP server transmits DHCPACK to the AP without IP address assignment. • STA transmits DHCPREQUEST in FILS message. This may or may not include specific (desired) IP address. • The AP transfer it to the selected DHCP server. • DHCP server assigns IP address even if the DHCPREQUEST does not include specific IP address. • The AP transfer it to the STA in FILS message. DHCP modifications are red-lined. 1 2 3 4 5 6 7 8 Hitoshi Morioka, ROOT INC.

  9. Questions & Comments Hitoshi Morioka, ROOT INC.

More Related