Download
1 / 10
100 likes | 116 Views
A Solenoid valve works as an electromechanical gadget with a current which is going through the coil present in the valve. This current flow results in the expansion of a magnetic field utilized in controlling the flow of gas as well as liquid.<br><br>Here are a few points that you should be kept in mind while shortlisting a solenoid valve.
E N D
HOW TO SHORTLIST SOLENOID VALVE BASED ON YOUR DESIRED TECHNICAL SPECIFICATIONS IN FEW EASY STEPS?
Presentation Overview Topics to be Discussed Introduction The Type of Valve to Utilize The Rate of Flow The Pressure of Operating Requirements of Power Contact Us DASSSERVICES. INC
Introduction Solenoid valves basically works as an electromechanical gadget with a current which is going through the coil present in the valve. This current flow results in the development of a magnetic field utilized in controlling the flow of gas as well as liquid powered apparatuses and frameworks. There are a lot of things that should be kept in mind while short listing a solenoid valve.
The Type of Valve to Utilize Direct Acting Valve Pilot Operated Valve Direct Acting Valve is the sort of valve that depends on the level of the active current present in the coil to work appropriately. The valve opens and closes depending upon the pressure and liquid flow or gas that is provided to it and doesn't surpass the most extreme pressure accessible. Pilot Operated Valve that comes with the main valve seats along with a pilot, the top part of the valve is comprised of the pilot seat with an orifice. The pilot operated valve needs the full power in order to both open and be kept open, however, it requires less electrical capacity to work. Similarly, there is two-way, three-way and a four-way valve, having two, three and four ports respectively.
THE RATE OF FLOW Before choosing a solenoid valve, you need to decide the required rate of flow for the application, keeping in mind the end goal to accurately pick a solenoid valve. Ensure that how much flow is required if the valve is too huge for its utilization, as you will be wasting money and air/liquid and in case that it's too little the actuator won't appropriately work.
The Pressure of Operating Go through the operating pressure provided to you by the valve's producer. Since working weight pressure affects the flow rate of the valve, deciding the pressure of operating can enable you to pick a valve that will execute as required relying upon application.
Requirements of Power The amount of wattage or voltage required, realizing that can enable you to pick the correct sort of solenoid valve to use for the application. Observe however that the flow is restricted by the orifice of the valve; greater orifices have a tendency to require more capacity to utilize. For instance, if your utilization requires high flow rates and low power supply, at that point you ought to consider utilizing a pilot worked valve as it is best utilized in those sorts of intensity necessities.
Going through all these points, you will be able to shortlist a solenoid valve based on your desired technical specification. However, in case you still have some confusion then check out DAS Services (www.dasservicesinc.com) as DAS Services, Inc. is a leading provider of small factory automation and robotic components to many of today's largest and most successful corporations.
About Us DAS Services, Inc. is a leading provider of small factory automation and robotic components to many of today's largest and most successful corporations. The owner, Lou Pavlovich, had some 30 plus years experience in the Factory Automation field. The original name Design Automated Systems was chosen to illustrate the companies strengths- the selection and provision of the proper pneumatic equipment and pneumatic components to meet the automation needs of each individual customer.
