1 / 10

från/till LandXML

Anläggnings- & vägmodeller. från/till LandXML. Om SBG – Svensk ByggnadsGeodesi. SBG grundades 1970 av Sven Vejde SBG köptes av Hexagon Jan 2007 Huvudkontor i Stockholm (Huddinge), Sverige Utvecklat maskinstyrning sedan 1995 ~30 anställda Sålda licenser (ungefärligt): Geo 3700

dawn
Download Presentation

från/till LandXML

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Anläggnings- & vägmodeller från/till LandXML

  2. Om SBG – Svensk ByggnadsGeodesi • SBG grundades 1970 av Sven Vejde • SBG köptes av Hexagon Jan 2007 • Huvudkontor i Stockholm (Huddinge), Sverige • Utvecklat maskinstyrning sedan 1995 • ~30 anställda • Sålda licenser (ungefärligt): • Geo 3700 • GeoPad 2600 • GeoROG 1900 Adress: Elektronvägen1 14149Huddinge

  3. Vad gör SBG “Sömlöst data utbyte”

  4. www.landxml.org

  5. Changes to 3D Road Model 1.1 VS 1.2 <DesignCrossSect> • The design cross data model has been simplified. The CrossSectSurf (for sampled ground surface data) and the DesignCrossSectSurf (representing a designed surface) are now peers. The previous method of grouping <DesignCrossSectSurf> into left and right side collections is overly complicated. • A <DesginCrossSectSurf> is made up of <CrossSectPnt>s that can reference additional geometry to describe the geometric transition between two or more sections. Three types of geometry may be referenced Alignments, Parcel and PlanFeature. The accompanying *Refstation attribute specifies the station along the referenced geometry that the point lies on. • The dataFormat attribute is now optional and if not present defaults to offset distance, offset elevation format. Offset as measured from the centerline or profile grade line. • Two attributes were removed designLocation and connectionType because the information can be derived from the point data in cross section surfaces

  6. Example 1: Two lane road design cross section

  7. Example 2: Two lane road design cross section

  8. Example 3: Two lane road design cross section

  9. Road design cross section conventions: • All offset values are measured from the PGL and are horizontal measurements. • + offsets to the right, - to the left of and way from the PGL. • + slopes increase from PGL, - slopes decrease. • Right side closed volume surface point are defined clockwise from the top most point down. • Left side closed volume surface point are defined counter-clockwise from the top most point down. • Inner connection points begin from PGL, the previous closed volume surface outer connection point or after a simple slope/offset point.

  10. Tack! Tack för din uppmärksamhet! Kent Persson SBG AB

More Related