100 likes | 295 Views
Battery Powered Phone Charger. By: Colt Schmidt. Finished piece. Required 4 AA Re-chargeable Batteries . Introduction . Needed a lot of experimenting on different batteries I tried 2 AA batteries, 9V battery, 4 AA batteries, and 4 AA Re-chargeable batteries
E N D
Battery Powered Phone Charger By: Colt Schmidt
Finished piece Required 4 AA Re-chargeable Batteries
Introduction • Needed a lot of experimenting on different batteries • I tried 2 AA batteries, 9V battery, 4 AA batteries, and 4 AA Re-chargeable batteries • 4 AA re-chargeable batteries worked • Gives your device about 3 full charges
Background • I found a new way to charger your device without using the wall or the car • It is portable and small • It runs off of batteries and it is re-useable • Most of my information came from tests and the internet
Materials • 9V battery holder • Battery holder 2 AA • Battery holder 4 AA • Wires • Circuit board with components • Tin can • Voltage tester • Pliers • Soldering gun • Wires cutter • Batteries
Procedures • Assemble circuit board • Solder wires to battery sockets • Test battery socket • Solder USB port to circuit board • Perform another test • Test by plugging in an IPod using a USB cable to see if battery charger works • If it doesn’t work repeat on different batteries
RE-Chargeable Batteries Put out less volts Can be constantly re-used Better for the environment
Wall Charger Vs. Battery Charger Fixed Wall Charger Portable Battery Charger
Thank you for watching! Colt Schmidt