330 likes | 338 Views
Sound. Loudness and Pitch. frequency = pitch Amplitude = volume or intensity I a A 2 . If A doubles I increase by 2 2 or 4. Standing Wave & Resonance. pattern that results when 2 waves, of same f , & A travel in opposite directions.
E N D
Loudness and Pitch • frequency = pitch • Amplitude = volume or intensity • I a A2. • If A doubles I increase by 22 or 4.
Standing Wave & Resonance pattern that results when 2 waves, of same f, & A travel in opposite directions. Often formed from pulses reflect off a boundary. Waves interfere constructively (antinodes) & destructively (nodes) at fixed points.
Standing waves have no net transfer of energy – no direction propagation of energy.
Standing Waves form at natural frequencies of the material. Occur when material is at resonance.When system is disturbed it vibrates at many frequencies. Standing wave patterns continue. Other frequencies to die out.Since there is resonance, the amplitude of particular wavelengths/frequencies will be amplified.
Relation of Wavelength to String Length for Standing Waves L = 1/2l.
General expression relating wavelength to string length for standing waves: • n ( ½ l) = L • n is a whole number • A whole number of half l’s must fit.
Although we would perceive a string vibrating as a whole, it vibrates in a pattern that appears erratic producing many different overtone pitches. What results are particular tone colors or timbres of instruments and voices.
Harmonics Each standing wave pattern on a string can produce a harmonic.
The lowest possible frequency at which a string could vibrate to form a standing wave pattern is known as the fundamental frequency or the first harmonic.
String Length L, l & HarmonicsStanding waves can form on a string of length L, when the l can = ½ L, or 2/2 L, or 3/2L etc.Standing waves are the overtones or harmonics.L = nln. n = 1, 2, 3, 4 whole number harmonics. 2
Frequencies Substitute v/f for l. n = harmonic Since standing wave forms where ½ l can fit the string exactly, we can calculate f: Must know speed in material.
1st standing wave forms when l = 2L First harmonic frequency is when n = 1 as below. When n = 1, f = v/l . This is fundamental frequency or 1st harmonic. First harmonic has largest amplitude.
Other standing waves with smaller wavelengths form other frequencies that ring out along with the fundamental. For second harmonic n = 2. f2 = v/L
In general, The harmonic frequencies can be found where n = 1,2,3… and n corresponds to the harmonic. v is the velocity of the wave on the string. L is the string length.
A resonant air column is simply a standing longitudinal wave system, much like standing waves on a string. closed-pipe resonator tube in which one end is open and the other end is closed open-pipe resonator tube in which both ends are open
Standing Waves in Open PipeBoth ends must be antinodes.How much of the wavelength is the fundamental?
The 1st harmonic or fundamental can fit ½ l into the tube. Just like the string L = nl 2 fn = nv 2L Where n, the harmonic is an integer.
Closed pipes must have a node at closed end and an antinode at the open end. How many wavelengths? L = l 4
There are only odd harmonics possible – n = odd number only. L = 1/4l. L = 3/4l. L = 5/4l. fn = nv where n = 1,3,5 … 4L
Application: When waves propagate through a tall building, the building resonates like a tube open at two ends. • What is the equation that relates frequency to wave velocity and building height?
The building is 360 m tall and allows waves to travel through it at 2400 m/s, what frequency wave will cause the most damage to it? Explain why.(Hint: What is the resonant frequency)? • 3.3 Hz
Holt read 13 - 3pg 509 38 - 39, 41, 44 46, 47 pg 499 #1 – 4Start in class finish for hwk.