1 / 27

Introduction to the difraction analysis and SANS method

Students: Dana-Maria GHITA (Univ. of Craiova, Romania) Nicoleta-Madalina GIURGEA (Univ. of Bucharest, Romania) Andreea OPREA (Univ. of Bucharest, Romania) Claudia-Teodora TEODORESCU-SOARE (Univ. of Jassy, Romania) Project Coordinators: Dr. M . L . CRAUS (FLNP) Dr. A . I. KUKLIN (FLNP).

debra
Download Presentation

Introduction to the difraction analysis and SANS method

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Students: Dana-Maria GHITA(Univ. of Craiova, Romania) Nicoleta-Madalina GIURGEA(Univ. of Bucharest, Romania) Andreea OPREA(Univ. of Bucharest, Romania) Claudia-Teodora TEODORESCU-SOARE(Univ. of Jassy, Romania) Project Coordinators: Dr. M. L. CRAUS (FLNP) Dr. A.I. KUKLIN (FLNP) Introduction to the difraction analysis and SANS method JINR Summer Student Practice 5-25 July 2010

  2. Part 1:Corelations between structure and transport caracteristics ofmanganites with Cr impurities(La0.54Ho0.11Sr0.35)(Mn1-xCrx)O3

  3. Outline • Work done within the Project • Overview • Results • Conclusions

  4. Work Done Within the Project Manganite samples with the general structure La0.54Ho0.11Sr0.35Mn1-xCrxO3 have been studiedusing FullProf Suite code for existing data at (x = 0.05; 0.10; 0.15; 0.20). The goal of investigation was to estimate qualitatively : (1) the variation of the lattice constant values in terms of Cr impurity concentration (2) microstrain and crystallite average size dependence on the Cr concentration.

  5. Outline Work done within the Project Overview Results Conclusions

  6. Overview The samples: La0.54Ho0.11Sr0.35Mn1-xCrxO3 manganites were prepared by sol-gel method using oxides and acetates and sintered in air at 1200C for 15 h. It is known: The samples show perovskite phases, with orthorhombic structure (Space Group – P n m a). ABO3 perovskito-manganites determine the charge transport behavior and complex magnetic and crystalline structures. X-ray data for samples (with different Cr concentrations) mentioned in our reportwas obtained with Hubber-Guinier diffractometer by using Cr Kα1 radiation and was handled using FullProf Suite code.

  7. Unit cell of manganite La0.54Ho0.11Sr0.35Mn1-xCrxO3 Features: • Distorted Perovskite • Orthorhombic space group: Pnma #62 • Primitive lattice (P) • Glide plane (n) perpendicular to a axis • Mirror plane (m) perpendicular to b axis • Glide plane (a) perpendicular to c axis

  8. FullProf Main Features The program has been mainly developed for Rietveld analysis (structure profile refinement) of neutron (nuclear and magnetic scattering) or X-ray powder diffraction data collected at constant or variable step in scattering angle 2θ • X-ray diffraction data: laboratory and synchrotron sources. • Neutron diffraction data: Constant Wavelength (CW) and Time of Flight (TOF). • The scattering variable may be 2θ in degrees, TOF in microseconds and Energy in KeV. • Background: fixed, refinable, adaptable, or with Fourier filtering. • Choice of peak shape for each phase: Gaussian, Lorentzian, modified Lorentzians, pseudo-Voigt, Pearson-VII, Thompson-Cox-Hastings (TCH) pseudo-Voigt, numerical, split pseudo-Voigt, convolution of a double exponential with a TCH pseudo-Voigt for TOF. • Multi-phase (up to 16 phases). • Absorption correction for a different geometries. Micro-absorption correction for Bragg-Brentano set-up. free program http://www.ill.eu/sites/fullprof/

  9. FullProf Main Features • Choice between automatic generation of hkl and/or symmetry operators and file given by user. • Magnetic structure refinement (crystallographic and spherical representation of the magnetic moments). • hkl-dependence of the position shifts of Bragg reflections for special kind of defects. • Profile Matching. The full profile can be adjusted without prior knowledge of the structure (needs only good starting cell and profile parameters). • Quantitative analysis without need of structure factor calculations. • Chemical (distances and angles) and magnetic (magnetic moments) slack constraints. They can be generated automatically by the program. • The instrumental resolution function (Voigt function) may be supplied in a file. A microstructural analysis is then performed. • Neutron (or X-rays) powder patterns can be mixed with integrated intensities of X-rays (or neutron) from single crystal or powder data. • Full Multi-pattern capabilities. The user may mix several powder diffraction patterns (eventually heterogeneous: X-rays, TOF neutrons, etc.) with total control of the weighting scheme.

  10. Outline Work done within the Project Overview Results Conclusions

  11. Observed and calculated difractograms of La0.54Ho0.11Sr0.35Mn0.95Cr0.05O3 (FullProf method)

  12. Observed and calculated difractograms ofLa0.54Ho0.11Sr0.35Mn0.90Cr0.10O3(FullProf method)

  13. Observed and calculated difractograms ofLa0.54Ho0.11Sr0.35Mn0.85Cr0.15O3(FullProf method)

  14. Observed and calculated difractograms ofLa0.54Ho0.11Sr0.35Mn0.80Cr0.20O3(FullProf method)

  15. Variation of the lattice constants and the unit cell volume (a,b,c,V) vs.Cr concentration x

  16. Variation of the microstrain Ɛ and of the apparent size of the crystallite vs. Cr concentrationx

  17. Outline Work done within the Project Overview Results Conclusions

  18. Conclusions to Part 1 • Lattice constants a and c decrease monotonically, while b and unit cell volume V vary non-monotonically with the Cr (chrome) concentration. • The microstrain shows a maximum, while the average size of crystallites shows non-monotonic variation with Cr concentration .

  19. Part 2 : SANS - Introduction Small angle neuton scattering is a method of analisys used in research for the determination of the structures and parameters of different solid samples. The measured magnitude in a small angle scattering experiment is the intensity as a function of the momentum transfer Q=4π/λ sinΘ (scattering vector). SANS techniques: -The pin-hole SANS covers the conventional range of 1 to 100nm. This range is exptended by the focusing SANS with either mirrors or lenses up to 1000nm. -The double crystal (Bonse Hart) diffractometer reaches length scales in the μm range.

  20. Information which can be obtained by SANS • Sizes, spatial correlations and shapes of particles, aglomerates, pores and fractals in crystalline and amorphous states, as well as in solutions on a length scale ranging from 1 nm up to several hundred nanometers • Phase transitions • Degree of polydispersity • Aggregation numbers • Molecular weight • Geometric peculiarities

  21. Special methods Contrast Variation Method– Determination of object density – Investigation of system homogeneity Label Method– Analysis of density distribution inside the object under study

  22. YUMO-Frank Laboratory of Neutron Physics, Joint Institute of Nuclear Physics, Dubna, Russia 1 – two reflectors;2 – zone of reactor with moderator;3 – chopper;4 – first collimator;5 – vacuum tube;6 – second collimator;7 – thermostate;8 – samples table;9 – Vn-standard;10 – ring-wire detector;11 – position-sensitive detector "Volga";12 – direct beam detector.

  23. SAXS and SANS comparison Commons: - elastic - coherent - magnetic scattering - nuclear Differences : SAXS - big scattering angle - q range = 0.8 ÷1 Å-1 SANS - small scattering angle - q range= 0.001 ÷1 Å-1

  24. Conclusions to Part 2 • SANS is a powerful method for the investigation of sizes, shapes and density of particles in the range of: 20 ÷ 10 000Å. • The neutron measurements also enable the determination of magnetic correlations inside samples. • Contrast variation methods in the SANSframework allow nuclear and magnetic density estimates. • Etc.

  25. References • “Transport phenomena in La0.54Ho0.11Sr0.35Mn1-xCuxO3 manganites” Mihail-Liviu Craus1,2, Nicoleta Cornei 3, Ahmed Islamov2 and Vasyl M. Garamus4 • http://www.ill.eu/sites/fullprof/ • www.flnr.jinr.ru • Neutron Scattering, Thomas Brϋckel, Gernot Heger, Dieter Richter and Reiner Zorn, RWTH Aachen, University of Mϋnster • Perovskiti Magnetorezistivi:sinteza, proprietati si aplicatii, Mihail-Liviu Craus, Nicoleta Cornei, Mihai Lozovan, Viorel Dobrea, Iassy:Alfa,2008 • An introduction to the program FullProf,Juan Rodríguez-Carvajal, Laboratoire Léon Brillouin (CEA-CNRS), CEA/Saclay, 91191 Gif sur Yvette Cedex, FRANCE

  26. Acknowledgments • We are indebted to the Project leaders for their guidance & patience. • Thanks to the Direction and staff of UC for the nice organization of the summer student practice • Thanks to Prof. Dr. Gh. ADAM and Dr. S. ADAM for advice during the Summer practice • Thanks to Dr. O. CULICOV for the Reactor tour • Also thanks to Phd. Student R. ERHAN for good advices during the Summer practice

  27. Thank You for Attention!! Thank you for attention!!

More Related