1 / 21

Chapter 6.2 The Work of Streams

Chapter 6.2 The Work of Streams. Streams are the most important agents of erosion. cut and erode their channels carry enormous amounts of sediment drop the material to create new features. Streams (remember “stream” mean all flowing bodies of water) erode their channels by

decker
Download Presentation

Chapter 6.2 The Work of Streams

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6.2 The Work of Streams • Streams are the most important agents of erosion. • cut and erode their channels • carry enormous amounts of sediment • drop the material to create new features

  2. Streams (remember “stream” mean all flowing bodies of water) erode their channels by • abrasion (scraping) • grinding (sand and gravel act like sandpaper) • dissolving (water dissolves soluble materials)

  3. The glaciers move through the mountains grinding rock and ice against the mountains and a fine dust called glacial flour (as fine as the flour in your kitchen) stays in suspension in the water, giving it that muddy appearance. Large amounts of coarse gravel and boulders carried along underneath glaciers provide abrasive power to cut grooves. Finer sediments also in the base of the moving glacier further scour and polish the bedrock.

  4. SEDIMENT TRANSPORT Streams transport sediment in 3 ways:

  5. SEDIMENT TRANSPORT #1: DISSOLVED LOAD (in solution) • Most dissolved load enters the stream through groundwater. • ppm = parts of dissolved materials per million parts of water. • Average ppm = 115-120 ppm. Can reach 1000 ppm +.

  6. SEDIMENT TRANSPORT #1: SUSPENDED LOAD (in suspension) • Most streams carry the largest part of their load as suspended load. • Most visible part of load. • Usually carry sand, silt and clay in suspension. • during floods can carry larger materials.

  7. SEDIMENT TRANSPORT #1: BED LOAD (scooting and rolling) • Bed load is the streams load of solid material that contains sediment too large to suspend. • Travels along the bottom of the stream. • Requires more force from the water.

  8. SEDIMENT TRANSPORT #1: COMPETENCE and CAPACITY The ability of rivers to carry a load depends on two factors: Competence = the largest size particles that the stream can carry. Faster stream = stronger water = larger particles. More water = larger particles. Lake Lure, NC

  9. Capacity = Maximum load the stream can carry. Larger stream = more water = higher maximum load.

  10. DEPOSITION When a river slows down it dumps it’s load!

  11. Alluvium = sorted material that is deposited by streams. Alluvial Fan = fan-shaped deposit where streams meet larger bodies of water.

  12. Delta = accumulation of sediment formed where a stream enters a lake or ocean. Mississippi River Deltas over the past 5000 years. Today 2/3 of the sediment is deposited at the Bird Foot delta and 1/3 at the Atchafalaya delta. Nile River Delta Amazon River Delta Colorado River Delta

  13. Natural Levees = landform that parallels some streams. • Forms when a stream overflows its banks. • When the stream overflows, its velocity decreases rapidly and sediment is deposited.

  14. STREAM VALLEYS • Narrow Valleys • primary cutting is downward • lots of rapids and waterfalls • Wide Valleys • channel is closer to base level • erosion is less dominant • energy directed from side to side • produces a flat valley floor called a FLOODPLAIN

  15. Narrow Valleys

  16. Wide Valleys

  17. DRAINAGE BASINS = the area of land in which all rain that falls contributes to the same stream. Flash: Rivers Shapers of Earth

  18. FLOOD! Florence, MA Melbourne, AUSTRALIA Flash Flood, AZ Most floods are caused by rapid spring snow melt or storms that bring heavy rain over a large region.

  19. Levee construction. New Orleans 1727 FLOOD CONTROL Artificial Levees = earthen or synthetic mounds built on the banks of a river Flood-Control Dam = store floodwater and then let it out slowly Limited Development = Floodplain management, protection of wetlands. Oklahoma Riverside forests help to suppress overflowing water during floods

  20. What happens when Flood Controls fail? http://www.nola.com/katrina/graphics/credits.swf

  21. Katrina + Poor Levees = Fatal Failure Some of the following photos are graphic.

More Related