AP Series Wall Mounted Dehumidifier for indoor pool #pooldehumidifier #wallmounteddehumidifier

1. AP Series Wall Mounted Dehumidifier for indoor pool. swimmingpool-dehumidifier.com/ap-series-wall-mounted-dehumidifier-for-indoor-pool AP series pool dehumidifier system is made in Germany. It is very easy to install and operate. this indoor pool dehumidifier can be wall mounted with bracket or it can be floor mounted. Its extremely elegant look make to place on floor in your indoor swimming pool area. Unit has depth of only 24 cm with intake of humid air from front side and throw of dry air from top side. Unit indoor pool dehumidifier system has provision to add fresh air if required. This unit available in two capacities; AP50 has extraction capacity of 47 liters per day and AP70 has extraction capacity of 62 liters per day. 1/3

2. This pool dehumidifier has quite operation and incorporated with control panel from which we can set required humidity level. With help of built in hygrostat and humidistat unit will stop dehumidifier when set point is reach and start automatically again if pool room humidity increases. Under standard conditions AP 70 model is sufficient from swimming pool of surface area up to 40 square meter and AP 50 for 25 square meter. To install unit, user need to fix wall bracket and hang unit on it, connect power and drain and switch on Unit. Unit works on condensation principle. Control panel has neon light indication for “humidity ok”, “thermal switch off” and “Defrost” mode. Unit has automatic defrost facility which unit turn on whenever required. Unit consists of fully hermetic rotary compressor with R134 refrigerant gas, copper tube (with corrosion proof coating) made heat exchanger make unit very efficient. Unit comply protection standard of IPX4. Unit can optionally fitted with condensate pump if required and socket for fresh air in case you like to take some fresh air. Unit is suitable for whirlpool, sauna, spa and changing room etc. Details Specifications of AP series Pool Dehumidifier system. Specifications Features Video Documentation Extraction / Power Consumption Filter at 30°C / 80% r.h. = 62.4 l/24h / 1000 Watts/h Yes at 27°C / 60% r.h. = 33.6 l/24h / 850 Watts/h Working Range at 20°C / 60% r.h. = 24.0 l/24h / 720 Watts/h +10°C up to +32°C at 10°C / 70% r.h. = 15.0 l/24h / 700 Watts/h +40%r.h. up to 95% r.h. Voltage Weight 230V, 50Hz 54 kg Noise Level Noise Level Dimension (W x D x H) mm 52 db(A) 740 x 1024 x 261 2/3

3. Humidity Setting Drainage point Available Provided Refrigerant Air Volume R134a 1000 CMH Compressor Protection Class Rotary IPX4 Optional Accessories Condensate hose 15 x 2 mm Socket for fresh air Pump kit To know more about this wall mounted indoor pool dehumidifier, please contact us. 3/3