Workgroup on seismic field storage medium recommendations

1. Workgroup on seismic field storage medium recommendations SEG Technical Standards Committee Meeting SEG 2011 Conference San Antonio Tuesday Sep 20, 2011 Nils Aatland Fugro

2. Agenda • History and status (Seismic Field Tape Format Standards) • History and status (SEG-D standards) • EAGE Conference Vienna May 2011 • New SEG Work Group – ”Seismic field storage medium recommendations” Why? Tasks? Scope? Members/Volunteers? • 4.00-4.30 IBM (Jim Karp) • 4.30-5.00 Oracle (Bob Raymond)

3. Seismic field tape storage – history and status

4. 1967 SEG-A & SEG-B 1972 SEG-C SEG-D,Rev 2.1 SEG Field Tape Standards 1975 SEG-D Rev 0 1994 Rev 1 Rev 2 Rev 3 1996 2009 2006 Field Tape Standards History

5. SEG-D vs Tape Standards SEG-D rev 0 (1975): The nine track one-half inch tape is retained, but extension to 6250 BPI is permitted as long as it is compatible with the ANSI standard (ANSI 1973a, b, 1976). SEG-D rev 1 (1994): Providing provisions for using 1/2" square tape cartridges. ( ANSI X3.180 1989). SEG-D rev 2 (1996): Since Rev 2 is intended to handle higher density tapes, acceptable media is expanded to include: 3490/3490E, 3590, D2, and D3. SEG-D rev 2.1 (2006): One of the main driving forces behind a revision to the SEG-D standard at this time is the advent of what might be considered very high capacity tape devices. Of particular significance in the seismic industry is the IBM 3592

6. SEG-D Rev 3 Appendix F, which previously listed specific tape drives and corresponding maximum block sizes, has been removed. SEG-D revision 3.0 supports data on any fixed block, variable block and byte stream device including tapes, disks, DVDs, and network connections with record sizes up to any specific device, operating system, file system, or network limits. The plan is to keep information regarding specific devices, their block sizes and recommended usage in the Technical Standards pages on www.seg.org. This will allow keeping the information up to date without modifying the standards document.

7. Status (seismic industry) • ~1000 IBM TS1120 drives (worldwide - offshore, only) • ~1.000.000 3592 JA cartridges in our industry (2005-2011) • What to do? • Alternativ 1: Do nothing? • Alternativ 2: Establish a new de facto standard in our industry?

8. SEG Technical Standards Committee Meeting EAGE Conference Vienna 2011 Wednesday May 25, 2011

9. New SEG workgroup (EAGE slide) “Seismic field storage medium recommendations” Official launch today (May 25’th 2011) Will be published in TLE June 2011 (SEG’s The Leading Edge) Group headed by Nils Aatland (n.s.aatland@fugro.no)

10. Seismic field storage medium recommendations (EAGE) Initial task: Define scope Volunteers requested

11. SEG: The Leading Edge

12. The Leading Edge (June 2011) • Since the removal of a tape-device recommendation from the SEG-D standard to avoid endorsing an individual manufacturer, the industry has been requesting some guidance on what storage media are suited for seismic survey field usage. The TSC is therefore forming a workgroup with this focus. • The workgroup will evaluate traditional storage such as various tape-storage devices but also will look into the usage of other storage options such as disc, flash drives, and memory sticks. • The result of the work will be a document describing the recommended usage of the various storage options with respect to their suitability as primary data storage, long-term storage, or transient/short-term storage. The recommendations from the workgroup will be published on the TSC pages at www.seg.org. • People and organizations wishing to participate in this effort, either by providing input to the workgroup or by active workgroup participation, are kindly requested to contact the TSC chair Rune Hagelund (rune.hagelund@roxar.com) or the leader of the workgroup, Nils Aatland (n.s.aatland@fugro.no). Regular status updates on the workgroup’s progress will be available in the TSC collaboration community. • Launched May 25’th 2011 (EAGE Vienna)

13. ”Volunteers” Nils Aatland – Fugro (Work group leader) Rune Hagelund – SEG TSC Chairman Jill Lewis – Troika International Helge Thomassen & Adrian Hack - WesternGeco Angus Stott PGS Andy Cairns – CGGVeritas Tore Larsen Dolphin Geo Nick White & Guy Holmes - Spectrum ASA Perth Frank Wikmark Polarcus (Eric Toogood NPD) Oil Companies? ION Geo? Sercel? (Jacques Hamon?)

14. The proposed subject area is vast ! Nick White Spectrum ASA 1. Tape storage: o Tape types & capacities (traditional and state-of-the-art types) o Advantages o Disadvantages 2. Disk storage: o External disk types & capacities (CD, DVD, Blu-Ray) o Advantages o Disadvantages 3. USB storage: o Current status (preferred over tape as primary means of storage ?) o Future trends (especially with regard to data capacity !)

15. Tape drives the last 10+ years Enterprise tape • IBM 3592 (gen1, 2, 3 and 4), e,g, 3592, TS1120, TS1130, TS1140 3590 (B, E and H) • Oracle/Sun/STK T10K (A, B and C) 9940 (A and B), 9840 (A, B and C) ”Single source” (drive and media). Midrange tape • LTO (1,2,3,4 and 5) 3 drive suppliers and 5? media suppliers Note! This is not a complete list (D2,D3,DLT, SDLT)

16. IBM 3592 Cartridge Media • No JA-type support (TS1140) • JB/JX may be read in J2B, read/written/re-formatted in J3B, and read/written/up-formatted to J4B • New JC/JY/JK media type support = “up-formatted reuse”

17. Important issues 1. IBM TS1120 withdrawal date from marketing / service? 2. Standard length (=JA) 3592 Media withdrawal date from marketing? 3. IBM TS1140 read support of JA media? 4. IBM TS11xx road map included media compatibility? 5. Oracle Enterprise Tape? 6. LTO? 7. Tape Silos IBM libraries do not support Oracle enterprise tape drives? Oracle libraries do not support IBM enterprise tape drives?

18. Seismic field storage - Future ”Industry requirements” - Enterprise tape? - 350+ MB/sec? - 10 TB capacity? - > 1 media source - … Presentations today (in this room) - 04.00-04.30 IBM – Jim Karp - 04.30-05.00 Oracle – Bob Raymond