1 / 7

Chelmsford Amateur Radio Society Intermediate Course (10) Soldering

Chelmsford Amateur Radio Society Intermediate Course (10) Soldering. Soldering. The accepted definition of soldering is the joining of metals using a filler material of a lower melting point than that of the parent metals to be joined. Soldering Procedure.

dentd
Download Presentation

Chelmsford Amateur Radio Society Intermediate Course (10) Soldering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chelmsford Amateur Radio Society Intermediate Course(10) Soldering

  2. Soldering The accepted definition of soldering is the joining of metals using a filler material of a lower melting point than that of the parent metals to be joined.

  3. Soldering Procedure • The secret of a good solder joint is clean, clean and clean again. • A solder joint is produced by:- • 1 First thoroughly cleaning both surfaces to be joined. • 2 Tin both surfaces. • 3 Mechanical fix the components together. • 4 Then apply heat to the joint and bring the solder to the joint.

  4. Solders Solder is an amalgam of Tin and Lead. The percentage of each of these materials defines the use for the solder %Tin%LeadUse 60 40 Good for all electrical and mechanical work 45 55 Very liquid used in plumbing 50 32 Low melt solder for white-metal casings Plumbers solder is not suitable for electrical work

  5. Solder Types • Solder comes in many forms i.e.:- • A solder stick with separate flux, • Solder Pastes good for joints outside, easy to use. • Multi-core solder is the usual form for electrical work.

  6. Flux Tin/Lead Multicore Solder

  7. SOLDER SOLDER DIRT WIRE TAG TAG Solder Joints BAD JOINT TOO MUCH SOLDER BAD JOINT TOO LITTLE SOLDER GOOD JOINT OUTLINE OF WIRE SHOWING THROUGH SOLDER

More Related