1 / 11

Outline of PTY Talk

Outline of PTY Talk. Introduction to Company and Basic Idea of your Project(s)/Work Scientific Theory Experimental Apparatus Summary of Results Interpretation, Analysis and Discussion Conclusions/Summary

denzel
Download Presentation

Outline of PTY Talk

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Outline of PTY Talk • Introduction to Company and Basic Idea of your Project(s)/Work • Scientific Theory • Experimental Apparatus • Summary of Results • Interpretation, Analysis and Discussion • Conclusions/Summary • What did you learn during the year? What are the benefits and advantages of a placement? • Acknowledgments

  2. Bullet Points Are Effective! • You can break up ideas into logical steps. • The audience can follow your argument in a step-by-step fashion. • It will be easier for them to understand. • The presentation will be logical and orderly.

  3. Which Font Size Should You Use? (36) This is 28-point font size. It is suitable for headings or sub-headings. This 18-point font size is suitable for the main text, but is the lower limit in size that can be easily read. This is 12-point font size. It will be nearly impossible for most of your audience to read. Bolding helps to make it legible.

  4. An example of too much text on a single slide Excimer laser irradiation is used to crystallize hydrogenated amorphous silicon films (nominally 100 nm thick) on Corning 1737 glass substrates. The resulting films show a stratified microstructure with a high crystalline volume fraction as established by Raman spectroscopy. There is a range of excimer laser energy flux that can produce stratified nanocrystalline silicon with an optical Tauc gap as high as 2.2 eV. This value is greater than that of amorphous or crystalline silicon and is contrary to reported theoretical analysis on mixed phase silicon thin films. The phenomenon is explained by employing structural characterisation techniques. Excimer lasers have been utilised for crystallization of hydrogenated amorphous silicon (a-Si:H) for applications such as thin film transistors and photovoltaics.1-2 The technology is well established for thin film transistor formation in commercial applications. Excimer lasers typically operate in the UV, where the energy is highly coupled to a-Si:H and nanocrystalline silicon (nc-Si:H), due to their high absorption coefficients in the UV. Energy is absorbed by the material within a few nanometres of the surface, melting and solidifying it on nanosecond time scales, without harming the underlying substrate. This technique enables the use of inexpensive substrates, such as glass, which are highly preferable for low-cost, large-area devices.

  5. Not enough colour This style might be seen as a little bit boring. There is nothing to hold the attention of the audience. Photos, diagrams and drawings are very effective in grabbing attention and in communicating ideas.

  6. TooMuch Colour • A rainbow effect is distracting to the audience. • There is too much too look at. • The slides appear disorganised. • Does not look as professional.

  7. This is an example of good contrast. It is very easy to read. This is an example of very poor contrast. You have to strain your eyes to read it. This text has contrast, but it could be considered to be jarring to the eyes.

  8. Not a Great Graph

  9. A Better Graph

  10. A Beautiful Graph Median = 1.0 g= SF = 2.0

  11. What do you think of this one?

More Related